|
Seaview DPOD Deck Power Pod Box
Max Usable Face: 13.75" x 9"
Max Cut Out Area: 12.938" x 8.125"
The DPOD is a instrument deck pod designed for power boats. Seaview took their modular mount concept and applied it to their instrument pod product line. There will be three different box sizes to fit almost any chart plotter or instrument on the market. What makes the DPOD so great is that it really appeals to fisherman because of its quick rotating base.
Rotating Base
The quick rotating base makes the DPOD a really nice choice for fisherman as it allows you to rotate the screen for better viewing on the fly, so you don't miss that catch! Simply pull the secure bolt out and rotate the DPOD left or right up to 350 degrees. To lock the anodized aluminum base back into place simply push the secure bolt back in, it's so easy you can do it with one hand!
Construction
The DPOD is made from UV resistant ABS plastic and security screws are used to hold it all together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this DPOD is the ability to add optional side pods (part #SP1BOX). Currently no other deck pod on the market has this feature. This optional add-on will fit single instruments 4.125" x 4.125" or smaller. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
369.60 |
|
|
Seaview DPOD Deck Power Pod Box
Max Usable Face: 11.75" x 7"
Max Cut Out Area: 11" x 6.125"
The DPOD is a instrument deck pod designed for power boats. Seaview took their modular mount concept and applied it to their instrument pod product line. There will be three different box sizes to fit almost any chart plotter or instrument on the market. What makes the DPOD so great is that it really appeals to fisherman because of its quick rotating base.
Rotating Base
The quick rotating base makes the DPOD a really nice choice for fisherman as it allows you to rotate the screen for better viewing on the fly, so you don't miss that catch! Simply loosen the locking screw and rotate the DPOD left or right up to 350 degrees. To lock the anodized aluminum base back into place simply tighten the locking screw, it's so easy you can do it with one hand!
Construction
The DPOD is made from UV resistant ABS plastic and security screws are used to hold it all together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this DPOD is the ability to add optional side pods (part #SP1BOX). Currently no other deck pod on the market has this feature. This optional add-on will fit single instruments 4.125" x 4.125" or smaller. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
302.40 |
|
|
Seaview DPOD Deck Power Pod Box
Max Usable Face: 14.75" x 5"
Max Cut Out Area: 13.875" x 4.125"
The DPOD is a instrument deck pod designed for power boats. Seaview took their modular mount concept and applied it to their instrument pod product line. There will be three different box sizes to fit almost any chart plotter or instrument on the market. What makes the DPOD so great is that it really appeals to fisherman because of its quick rotating base.
Rotating Base
The quick rotating base makes the DPOD a really nice choice for fisherman as it allows you to rotate the screen for better viewing on the fly, so you don't miss that catch! Simply pull the secure bolt out and rotate the DPOD left or right up to 350 degrees. To lock the anodized aluminum base back into place simply push the secure bolt back in, it's so easy you can do it with one hand!
Construction
The DPOD is made from UV resistant ABS plastic and security screws are used to hold it all together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this DPOD is the ability to add optional side pods (part #SP1BOX). Currently no other deck pod on the market has this feature. This optional add-on will fit single instruments 4.125" x 4.125" or smaller. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
297.60 |
|
|
Seaview SPOD Sail Pod Box
Max Usable Face: 13.75" x 9"
Max Cut Out Area: 12.938" x 8.125"
The Seaview Sail Pod, also known as SPOD is a instrument pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Made from UV resistant white ABS plastic and sealed with a rubber gasket. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.
Achieve the Perfect View
The SPOD has a wide mounting angle, allowing for precise viewing. Angle is set during installation.
Stainless Steel Clamps
Two high polished stainless steel clamps are used to secure your SPOD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. the SPOD fits standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the SPOD together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this SPOD is the ability to add optional side pods (part #SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
384.00 |
|
|
Seaview SPOD Sail Pod Box
Max Usable Face: 16.938" x 12.25"
Max Cut Out Area: 16" x 11.25"
The Seaview Sail Pod, also known as SPOD is a instrument pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Made from UV resistant white ABS plastic and sealed with a rubber gasket. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.
Achieve the Perfect View
The SPOD has a wide mounting angle, allowing for precise viewing. Angle is set during installation.
Stainless Steel Clamps
Two high polished stainless steel clamps are used to secure your SPOD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. the SPOD fits standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the SPOD together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this SPOD is the ability to add optional side pods (part #SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
427.20 |
|
|
Seaview SPOD Sail Pod Box
Max Usable Face: 14.75" x 5"
Max Cut Out Area: 13.875" x 4.125"
The Seaview Sail Pod, also known as SPOD is a instrument pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Made from UV resistant white ABS plastic and sealed with a rubber gasket. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.
Achieve the Perfect View
The SPOD has a wide mounting angle, allowing for precise viewing. Angle is set during installation.
Stainless Steel Clamps
Two high polished stainless steel clamps are used to secure your SPOD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. the SPOD fits standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the SPOD together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this SPOD is the ability to add optional side pods (part #SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
316.80 |
|
|
Add-On Instrument Pod - Uncut
Max Usable Face: 4.625" x 4.625"
Max Cut Out Area: 4.125" x 4.125"
This Seaview Accessory Pod can be mounted to Seaview Sail Pods, Deck Pods or Rail Pods. These Accessory Pods give you the flexibility to mount additional instruments.
Made from high quality marine grade UV resistant ABS plastic and is held together with tamper resistant security screws. A water tight gasket prevents water from intruding into the pod.
Depending on the size of your Sail Pod, Deck Pod or Rail Pod one to four Accessory Pods can be mounted.
|
120.00 |
|
|
"X-Class" Radars Just Got A Power Boost!
Introducing The New DRS12AX 12kW &
DRS25AX 25kW DRS Radar Sensors
With the 2016 introduction of the DRS6AX X-Class Radar, Furuno raised the bar on performance for traditional X-Band recreational Radar. We're now driving that bar up a couple more notches with two new, high-power X-Class Radar options for NavNet TZtouch and TZtouch2, as we introduce the new DRS12AX and DRS25AX, High-Power X-Class Radars.
X-Class Radars deliver incredibly high performance, at an extremely competitive price, while also featuring improved short range definition and impressive long range detection. A dedicated "Bird Mode" is integrated into all X-Class Radars, providing fantastic bird detection performance, even at extended ranges. Best of all, these new High-Powered X-Class Radars can be added to any NavNet TZtouch or TZtouch2 network.
Here are some at-a-glance features and pricing for the
DRS12AX & DRS25AX X-Class Radars:
-Newly designed gearbox pedestal is 20% lighter and quieter than previous models, and is compatible with original DRS antenna arrays
-True Target Trails feature easily identifies moving targets such as birds & vessels on TZtouch MFDs
-Fast Target Tracking instantly provides target vectors and speed info for up to 30 targets
-1.2 microsecond long-range pulse length is 50% longer than the original DRS sensors, providing better tracking of birds and other long-range targets
-Choose from 3.5', 4' or 6' Open Array to meet any installation requirements
-Simplified installation with no requirement for an external Power Supply on 24VDC vessels (optional 12V-24V DC Converter available)
-Works with TZtouch v5.01 or above (available early next week) and TZtouch2 v4.01 or above software (available now)
-Enhanced Bird Mode detects flocks of birds at long ranges
-Multiple bolt-patterns on gearbox offer flexibility for new-builds and retrofits Compatible with NavNet TZtouch and TZtouch2 (not compatible with NavNet 3D or earlier NavNet models)
Specials Closeouts Remanufactured Rebates
|
|
|
Scanpod Helm Pod 4 Instrument Uncut - Usable Face 4.3" x 19.7" - White
Specifications:
4 Instrument
Color: White
Depth: 3.2"
Usable Face: 4.3H" x 19.75W"
Scanpod Range
The exciting range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot control onto yachts and powerboats
Features:
Simplified range - easy product selection
Manufactured from acrylic caped ABS plastic - tough, durable and UV stable
Tamper proof stainless fastenings - secure install without self-tapping into plastic
Innovative watertight seal system - full instrument protection supplied uncut to fit any display
|
336.83 |
|
|
SP3S1 - Uncut Rail Pod
Max Useable Face: (13.75" x 9")
Max Cut Out Area: (12.938" x 8.125")
Seaview offers a solution to the age old problem of figuring out where to mount all your instruments on your sailboat. The Seaview Rail Pod allows you to mount smaller displays and instruments directly to the rail. Allowing you to postion the instrument where it is most optimal for you. Fits onto 1", 1-1/8" or 1-1/4" rails. A single high polished 316 stainless steel clamp is used. Cables are routed internally through the clamp and into the rail. The Rail Pod housing is made from UV protected ABS plastic housing, and sealed with a water tight rubber gasket. Tamper resistant screws are used to hold the housing together. A reinforced base made from King Starboard is added for increased strength and stability (on certain models).
Stainless Steel Clamp
A single high polished stainless steel clamp is used to secure your Rail POD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. Seaview Rail Pods fit standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the Rail Pod together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this SPOD is the ability to add optional side pods. Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the customer lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
374.40 |
|
|
Seaview SPOD Sail Pod Box
Max Usable Face: 11.75" x 7"
Max Cut Out Area: 11" x 6.125"
The Seaview Sail Pod, also known as SPOD is a instrument pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Made from UV resistant white ABS plastic and sealed with a rubber gasket. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.
Achieve the Perfect View
The SPOD has a wide mounting angle, allowing for precise viewing. Angle is set during installation.
Stainless Steel Clamps
Two high polished stainless steel clamps are used to secure your SPOD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. the SPOD fits standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the SPOD together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this SPOD is the ability to add optional side pods (part #SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
340.80 |
|
|
SP2S1 - Uncut Rail Pod
Max Useable Face: (11.75" x 7")
Max Cut Out Area: (11" x 6.125")
Seaview offers a solution to the age old problem of figuring out where to mount all your instruments on your sailboat. The Seaview Rail Pod allows you to mount smaller displays and instruments directly to the rail. Allowing you to postion the instrument where it is most optimal for you. Fits onto 1", 1-1/8" or 1-1/4" rails. A single high polished 316 stainless steel clamp is used. Cables are routed internally through the clamp and into the rail. The Rail Pod housing is made from UV protected ABS plastic housing, and sealed with a water tight rubber gasket. Tamper resistant screws are used to hold the housing together. A reinforced base made from King Starboard is added for increased strength and stability (on certain models).
Stainless Steel Clamp
A single high polished stainless steel clamp is used to secure your Rail POD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. Seaview Rail Pods fit standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the Rail Pod together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this SPOD is the ability to add optional side pods. Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the customer lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
331.20 |
|
|
SP5S1 - Uncut Rail Pod
Max Useable Face: (14.75" x 5")
Max Cut Out Area: (13.875" x 4.125")
Seaview offers a solution to the age old problem of figuring out where to mount all your instruments on your sailboat. The Seaview Rail Pod allows you to mount smaller displays and instruments directly to the rail. Allowing you to postion the instrument where it is most optimal for you. Fits onto 1", 1-1/8" or 1-1/4" rails. A single high polished 316 stainless steel clamp is used. Cables are routed internally through the clamp and into the rail. The Rail Pod housing is made from UV protected ABS plastic housing, and sealed with a water tight rubber gasket. Tamper resistant screws are used to hold the housing together. A reinforced base made from King Starboard is added for increased strength and stability (on certain models).
Stainless Steel Clamp
A single high polished stainless steel clamp is used to secure your Rail POD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. Seaview Rail Pods fit standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the Rail Pod together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this SPOD is the ability to add optional side pods. Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the customer lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
307.20 |
|
|
Uncut Single Instrument Pod for Triton2 - Stainless Steel Clamp
Max Useable Face: (5″ × 5″)
Max Cut Out Area: (4.38″ × 4.38″)
Seaview offers a solution to the age old problem of figuring out where to mount all your instruments on your sailboat. The Seaview Rail Pod allows you to mount smaller displays and instruments directly to the rail. Allowing you to postion the instrument where it is most optimal for you. Fits onto 1", 1-1/8" or 1-1/4" rails. A single high polished 316 stainless steel clamp is used. Cables are routed internally through the clamp and into the rail. The Rail Pod housing is made from UV protected ABS plastic housing, and sealed with a water tight rubber gasket. Tamper resistant screws are used to hold the housing together. A reinforced base made from King Starboard is added for increased strength and stability (on certain models).
Stainless Steel Clamps
A single high polished stainless steel clamp is used to secure your Rail POD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. Seaview Rail Pods fit standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the Rail Pod together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with the Rail Pod is the ability to add optional side pods (part #SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
206.40 |
|
|
Ocean Equipment - Bringing Innovation to Market NavPod - Waterproof Housing for Marine Electronics
NavPod is committed to producing high-quality Waterproof Housings for Marine Electronics. NavPod stands behind its commitment by offering a 10-year warranty on all new Gen3 NavPods. NavPod wants you to be a customer for life and is willing to earn your trust and loyalty.
For Sail and Power - NavPods are tough and rugged yet clean and attractive! NavPods protect vital Marine Electronics from the harshest of offshore boating conditions. Pre-Cut models are available for Raymarine, Garmin, Simrad, Lowrance, Furuno, Humminbird, B&G, and more!
HoseCoil Washdown Systems
The HoseCoil product line includes a range of specialty hoses, washdown nozzles, and a unique line of thermoformed enclosures. HoseCoil hoses and nozzles are designed to withstand the harsh elements boaters require and are used in many other applications including homes, pools, spas, and RVs. Coiled and Expandable hoses are available with convenient storage bags and mounting systems.
Specials Closeouts Remanufactured Rebates
|
|