Uncut Single Instrument Pod for Triton2 - Stainless Steel Clamp Max Useable Face: (5″ × 5″) Max Cut Out Area: (4.38″ × 4.38″) Seaview offers a solution to the age old problem of figuring out where to mount all your instruments on your sailboat. The Seaview Rail Pod allows you to mount smaller displays and instruments directly to the rail. Allowing you to postion the instrument where it is most optimal for you. Fits onto 1", 1-1/8" or 1-1/4" rails. A single high polished 316 stainless steel clamp is used. Cables are routed internally through the clamp and into the rail. The Rail Pod housing is made from UV protected ABS plastic housing, and sealed with a water tight rubber gasket. Tamper resistant screws are used to hold the housing together. A reinforced base made from King Starboard is added for increased strength and stability (on certain models). Stainless Steel Clamps A single high polished stainless steel clamp is used to secure your Rail POD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. Seaview Rail Pods fit standard 9.5", 12" and non standard guard rails. Security screws are used to hold the Rail Pod together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in. Optional Accessory Pod One of the unique abilities with the Rail Pod is the ability to add optional side pods (part #SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket. 

Add-On Uncut Single Instrument Pod for Triton2 Max Usable Face: (5" x 5") Max Cutout Area: (4.38" x 4.38") This Seaview Accessory Pod can be mounted to Seaview Sail Pods, Deck Pods or Rail Pods. These Accessory Pods give you the flexibility to mount additional instruments. Made from high quality marine grade UV resistant ABS plastic and is held together with tamper resistant security screws. A water tight gasket prevents water from intruding into the pod. Depending on the size of your Sail Pod, Deck Pod or Rail Pod one to four Accessory Pods can be mounted.

Seaview SPOD Sail Pod Box Max Usable Face: 4.625" x 4.625" Max Cut Out Area: 4.125" x 4.125" The Seaview Sail Pod, also known as SPOD is a instrument pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Made from UV resistant white ABS plastic and sealed with a rubber gasket. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.  Achieve the Perfect View The SPOD has a wide mounting angle, allowing for precise viewing. Angle is set during installation. Stainless Steel Clamps Two high polished stainless steel clamps are used to secure your SPOD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. the SPOD fits standard 9.5", 12" and non standard guard rails. Security screws are used to hold the SPOD together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in. Optional Accessory Pod One of the unique abilities with this SPOD is the ability to add optional side pods (part #SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket. 

Scanpod Single Instrument Pod - Uncut - Arm Mounted - Fits 1" - 1.3" Rails Current sailboat designs often have very open cockpits with few options for installing retro-fit instruments. Options available to install a 7" display or standard instrument. Arm Mounted: Extend the Rail Pod away from narrow or crowded rails for better viewing Designed to ensure the Pod is always positioned for best viewing, whatever the angle of the rail

Scanpod Single Instrument Pod Rail Mount - Cut f/Standard Instrument - Fits 1" - 1.33" Rails Features: Applications: Designed for (1) Standard Instrument Current sailboat designs often have very open cockpits with few options for installing retro-fit instruments The Rail Pod gives you an option for fitting smaller displays and instruments directly onto a rail, in a position which suits you Rail Mounted Universal Fixing Fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33") Fit your display onto standard and curved rails Great Viewing Options Viewing angle can be set upon installation Cables are routed internally through the clamp and onto the rail Increased Protection Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time Supplied pre-cut with a 91mm diameter hole to accept all major brands of standard sized instrument heads

Clamp-On Flag Pole - 1/2" Diameter Stainless Steel Clamp & Pole Features: Clamp-On Flagstaff Pole made of 304 S.S. Clamp made of 316 S.S. Diameter - 1/2, Length - 17", Clamp Tube Size-7/8"

Stainless Steel Clamp-On Rod Holder Stainless Steel Type 316 Polished Features and Benefits Adjustable clamp to fit multiple pipe and tube sizes For use on vertical and horizontal pipe/tube Rotate and lock in fishing angle Rotates and locks every 18° Form-fitted PVC White Liner Specifications: Clamp Fits (Outside Diameter):7/8" & 1" O.D. (Tube) Location:Bow Rails Rod Holder Inside Diameter: 1-5/8"

Stainless Steel Clamp-On Rod Holder Stainless Steel Type 316 Polished Features and Benefits Adjustable clamp to fit multiple pipe and tube sizes For use on vertical and horizontal pipe/tube Rotate and lock in fishing angle Rotates and locks every 18° Form-fitted PVC White Liner Specifications: Clamp Fits (Outside Diameter):1-1/16" & 1-5/16" O.D. (Pipe), 1-1/4" O.D. (Tube) Location:T-Top Ring, Leaning Posts, Poling Platforms Rod Holder Inside Diameter: 1-5/8"

Stainless Steel Clamp-On Rod Holder Stainless Steel Type 316 Polished Features and Benefits Adjustable clamp to fit multiple pipe and tube sizes For use on vertical and horizontal pipe/tube Rotate and lock in fishing angle Rotates and locks every 18° Form-fitted PVC White Liner Specifications: Clamp Fits (Outside Diameter):1-11/16" & 1-15/16" O.D. (Pipe) Location:T-Top, Leaning Post & Poling Platform Leg Rod Holder Inside Diameter: 1-5/8"

Mini Stainless Steel Single Drop-In Horn with Stainless Steel Grill - 12V Low Pitch Features: All Stainless Steel Inside & Out 304 Stainless Steel inside and out including a sealed sound unit No rust Guaranteed for 5 years All meet ABYC A-23 for boats up to 12 meters Pre-wired It fits existing hole patterns Specifications: Dimensions: 3"L, 3-1/4"W, 1-3/4"H (7.5 x 8 x 4.5 cm) Max Amp Draw: 3 Amps. Grill Dimensions: 4-7/8" x 2-3/8" with 4" hole centers Rating: 106 dB @ 1 Meter Installed

Mini Stainless Steel Single Drop-In Horn with Stainless Steel Grill - 12V High Pitch Features: High pitched 304 Stainless steel inside and out 5-year Guarantee Prewired Mounting holes have 4" centers Hardware not included 3"L x 3-1/4"W x 1-1/2"H (7.5 x 8 x 4.5cm)

Add-On Instrument Pod - Uncut Max Usable Face: 4.625" x 4.625" Max Cut Out Area: 4.125" x 4.125" This Seaview Accessory Pod can be mounted to Seaview Sail Pods, Deck Pods or Rail Pods. These Accessory Pods give you the flexibility to mount additional instruments. Made from high quality marine grade UV resistant ABS plastic and is held together with tamper resistant security screws. A water tight gasket prevents water from intruding into the pod. Depending on the size of your Sail Pod, Deck Pod or Rail Pod one to four Accessory Pods can be mounted.

Instrument Pod for 2 Clipper Instruments CLZ-POD Robust POD moulding to suit 2 x Clipper Cockpit display units. Suitable for open cockpit mounting.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

1-1/4" Light Bar for Closed Dome Radar Stainless Steel - Must Get LTB Top Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance. Extra Height Clearance On select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction. Only LTB-R, LTB-S and LTB-S24 can fold over. Easy Installation Secured with a stainless steel clamp, simply use the supplied four bolts.

Starlink Modular Top Plate with Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel Base Starlink quick-release top plate for Seaview "M1" and "M2" style mounts. Features: 316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼” aluminum plate The top of the adapter is machined to fit the Starlink antenna post The adapter with the fixed base and modular plate is 4 1/4” tall The ¼” aluminum plate is powder-coated white and can accommodate a Seaview light bar