|
R509C-LHW CHIRP Transducer
Features:
Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
25-Internal, Broadband Ceramic Elements
Broadband / CHIRP / Spread Spectrum
Operating frequencies:
Low—Chirps from 28 kHz to 60 kHz
High—Chirps from 130 kHz to 210 kHz
Beamwidth (Adjustable):
Low—23° to 9°
High—8° to 4°
10 m (33’) cable, no connector
Fast-response water-temperature sensor
Boat size: 12 m (40’) and above
Hull Type: Fiberglass, wood, or metal
Exclusive Transducer ID®
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4334.37 |
|
|
R509C-LH CHIRP Transducer
Features:
Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
25-Internal, Broadband Ceramic Elements
Broadband / CHIRP / Spread Spectrum
Operating frequencies:
Low—Chirps from 28 kHz to 60 kHz
High—Chirps from 130 kHz to 210 kHz
Beamwidth (Adjustable):
Low—23° to 9°
High—8° to 4°
10 m (33’) cable, no connector
Fast-response water-temperature sensor
Boat size: 12 m (40’) and above
Hull Type: Fiberglass, wood, or metal
Exclusive Transducer ID®
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4150.31 |
|
|
PM275C-LHW CHIRP Transducer
Keel-mount 1kW dual-band CHIRP fishfinder transducer.
The PM265 is a Pocket/Keel mount unit available in the Low/Medium and Low/High bands. The PM275 is a wide beam version of the PM265 with Low/High bands and a wide beam.
Specifications:
Type: CHIRP dual-band fishfinder transducer
LM Version: Low Band 42-65 kHz / Beam width 25-16° // Medium Band 85-135 kHz / Beam width 16-11°
LH Version: Low Band 42-65 kHz / Beam width 25-16° // High Band 130-210 kHz / Beam width 10-6°
LHW Version: Low Band 42-65 kHz / Beam width 25-16° // High Wide Band 150-250 kHz / Beam width 25°
Power Rating: 1000 watts
Mounting: Pocket/Keel Mount
Housing: Urethane
Hull Aperture: 1.75" (44.5mm)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1897.84 |
|
|
PM111LH Pocket Mount - Low-High Chirp 2kW - No Connector
A popular choice for boat builders, pocket mount transducers is installed within a small custom pocket in your vessel’s hull or keel, flush to the surface. Though retrofit installation is possible, these transducers are most commonly used in vessels with a suitable pre-cut pocket.
Pocket-mounted transducers provide reliable and accurate sonar performance, with some impact on boat speed and fuel efficiency. As a common alternative, thru-hull transducers with a fairing block deliver comparable sonar performance and vessel impact.
Features:
Depth & fast-response water-temperature sensor
Fiberglass and metal stepped, planing, or displacement hull types
Advantages:
All the benefits of a thru-hull without the need for a high-performance fairing
Can accommodate any deadrise angle
Can be used with all propulsion types
Specifications:
Low (38 kHz to 75 kHz):
19° to 10° port/star
10° to 5° fore-aft beam
Maximum depth 6000 ft.
High (130 kHz to 210 kHz):
8° to 4° beamwidth
Max. depth 1500 ft.
Bottom Coverage Relative to Frequency and Depth
Depth (50 ft.): 6 ft.
Depth (100 ft.): 14 ft.
Depth (300 ft.): 42 ft.
Depth (600 ft.): 84 ft.
Depth (1000 ft.): 140 ft.
Depth (1500 ft.): 210 ft.
Depth (2000 ft.): Too deep
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2830.98 |
|
|
PM111 LHW CHIRP 2kW Wide-Beam Chirp-Ready Pocket/Keel Mount - No Connector
Get more coverage under your boat with Airmar’s unique wide-beam, high-frequency, Chirp-ready transducer. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high-frequency band results in superior resolution. The constantly wide beam provides twice the coverage and excellent fish arches on the display compared to most high-frequency, narrow-beam transducer options.
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essentially down to 152 m (500').
The low-frequency band and 2 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s dual-frequency, Chirp-ready transducer with wide-beam coverage.
Features:
The depth and fast-response water-temperature sensor
2 kW of power for great deep-water performance from the low frequency
2 kW low frequency: 38 to 75 kHz
19° to 10° port-starboard beamwidth
10° to 5° fore-aft beamwidth
Maximum depth of 1,829 m (6,000')
1 kW high frequency: 150 to 250 kHz
25° constant beamwidth
Maximum depth of 152 m (500')
137 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50, 68, and 200 kHz plus everything else in the bandwidth
High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation
High wide beamwidth yields more coverage for detecting fish in the upper-water column
Urethane housing designed for custom mounting in a cavity
Also available in an external (R109LHW) mount
Exclusive Xducer ID® technology
Specifications:
Weight: 13.6 kg (30 lb.)
Recommended Boat Length: 12 m (40') and above
Hull Material: Solid fiberglass only
Hull Deadrise: Accommodates any deadrise angle based on custom cavity construction
Acoustic Window: Epoxy/urethane
Transducer Element: 16 internal broadband ceramic assemblies
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3235.97 |
|
|
R109LHW Low High Wide Chirp Thru-Hull Transducer with Fairing Block - No Connector
Get more coverage under the boat with Airmar’s unique wide-beam, low- and high-frequency, Chirp-ready R109LHW. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25-degree beam for all frequencies, which results in superior resolution. The constantly wide beam provides twice the coverage and clear fish arches on the display compared to most high-frequency, narrow-beam transducers.
The high-wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essentially down to 152 m (500'). The low-frequency band and 2 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s Chirp-ready transducer with wide-beam coverage.
Features:
Depth and fast-response water-temperature sensing
2 kW of power for excellent deep-water performance from the low-frequency
2 kW low frequency (38 to 75 kHz): 19 to 10-degree port-starboard beamwidth; 10 to 5-degree fore-aft beamwidth
Maximum depth of 1829 m (6000')
1kW high frequency (150 to 250 kHz): 25-degree constant beamwidth; Maximum depth of 152 m (500')
137 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50, 68, and 200 kHz plus everything else in the bandwidth
High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation
High wide beamwidth yields more coverage for detecting fish in the upper-water column
Urethane housing with fairing for optimal performance
No Connector - Bare Wire
Comes with Fairing Block
Patented Xducer ID® technology
Specifications:
Acoustic Window: Epoxy/urethane
Common Use: Fishing, commercial fishing
Functions: Depth, temperature
High Frequency: 150-250 kHz
High-Wide Beamwidth: 25 degrees
Housing: Urethane
Hull Material: Compatible with all hull materials
Low-Frequency: 38-75 kHz
Low-Frequency Beamwidth: 19-10 degrees
Max Deadrise: Up to 22 degrees
Max Deadrise Angle: 22 degrees
Max Depth: Low frequency- 1829 m (6000'), High wide frequency- 152 m (500')
Max Vessel LOA: 9 m (30') and above
Mounting Style: Thru-hull
Power Rating: 2 kW
Retractable housing: No
Single or Dual Frequency: CHIRP-ready dual-band
Tilted Element: No
Weight: 15.1 kg (33.3 lb.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3383.02 |
|
|
R509C-LM CHIRP 3KW Transducer
Unlock the true potential of your fish-finder with the superior quality and performance of an AIRMAR Chirp-ready transducer.
Features:
Depth & fast-response water-temperature sensor
Epoxy transducer housing with high-performance fairing
For use on hulls up to 25° deadrise
82 kHz of total bandwidth from one transducer
Benefits of Thru-Hull Transducers with High-Performance Fairing:
The best performance on vessels 25 feet and up because the transducer face is in “clean” water below the boundary layer (bubbles running down the hull)
The fairing compensates for hull deadrise and reduces turbulence over the transducer face, which allows tracking at speeds over 30 knots (35 MPH)
When mounted in clean water (forward of propellers and running gear), thru-hulls produce the most effective signal return since nothing on the vessel interferes with the transducer’s active surface
Specifications:
Boat Size: 12 m (40 ft.) and above
Hull Type: Fiberglass, wood, or metal
Engine Type: Inboard, outboard or I/O
Low (28 kHz to 60 kHz):
23° to 9° port/starboard
11° to 5° fore-aft beamwidth
Maximum depth 10000 ft
Medium (80 kHz to 130 kHz):
13° to 8° beamwidth
Maximum depth 3000 ft.
Bottom Coverage Relative to Frequency and Depth
Depth (50 ft.): 10 ft.
Depth (100 ft.): 24 ft.
Depth (300 ft.): 68 ft.
Depth (600 ft.): 136 ft.
Depth (1000 ft.): 228 ft.
Depth (1500 ft.): 340 ft.
Depth (2000 ft.): 456 ft.
Depth (2500 ft.): 570 ft.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4453.13 |
|
|
Low/High Frequency - In-Hull Chirp Transducer without Connector
Rely on Airmar's new broadband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000') with 5 to 10 times greater detail and resolution so precise it_s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 112 kHz of total bandwidth in just one installation, saving customers time and money.
As the ELITE model in the Chirp In-Hull product line, the R599 LH Chirps across the following bandwidths:
LH Model - Low Frequency 28-60 kHz/High Frequency 130-210 kHz
Features:
Depth only
Low-CHIRPS from 28 kHz to 60 kHz 23° to 9° beamwidth
High-CHIRPS from 130 kHz to 210 kHz 8° to 4° beamwidth
112 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 28, 38, 50, and 200 kHz plus everything else in the bandwidth
Fishing Profile: Recreational and commercial inshore and offshore fishing (deep-water canyon and sea-mount tracking)
Epoxy transducer housing
Hull Type: Solid fiberglass only
Specifications:
Hull Deadrise: 0° to 22°
Acoustic Window: Epoxy/urethane
All mounting hardware provided, including tank
Weight: 19.7 kg (43.4 lb)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4441.25 |
|
|
CM599C-LHW Chirp Wide Broadband - No Connector - Bare Wires
Features:
Pocket/Keel mount wide-beam model with 3000W power rating
Depth and fast-response water temperature sensor
Wide-beam model with 25° constant beamwidth in High band and 9°-23° beamwidth in Low band
With Low (28-60kHz) and High (150-250kHz) frequency bands
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3889.06 |
|
|
B275C-LHW Bronze Thru-Hull - Low & High Wide Frequency
Requires Mix & Match Cable
Get more coverage under the boat with Airmar's wide beam CHIRP product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of CHIRP-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency CHIRP transducers.
A unique property of the high frequency transducers is that the beambwidth is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's wide beam format also creates crisper and larger return images on the display. We've got you covered!
Features:
Depth & Temperature
42-65 kHz L Frequency
150-250 kHz H Frequency
Bronze
1 kW
Wide 25° Beam
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2156.93 |
|
|
TM185C-HW-MM CHIRP Transducer Transom Mount Needs Mix & Match Cable
Get more coverage under the boat with Airmar's wide beam Chirp. Offering a high frequency range of 150-250 kHz and a constant 25° Beamwidth, this transducer is truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using this wide beam transducer will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers.
A unique property of the high frequency transducers is that the Beamwidth is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's wide beam format also creates crisper and larger return images on the display.
Features:
CHIRPS across the following bandwidths: — High-Frequency: 150-250 kHz
25° Constant Beamwidth
1kW (1,000 Watt) RMS Power
Depth Range: 600'-800'
Depth & fast-response water-temperature sensor
Urethane housing and stainless steel kick-up mounting bracket
Boat Size: 8 m to 12 m (25' to 40')
Boat Type: Outboards; I/O
Hull Type: Fiberglass, Wood, Metal
Can retrofit to existing TM258, TM260, TM265, and TM275 bracket
Needs Mix & Match Cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1224.20 |
|
|
MM-8G Mix & Match Cable for 600W Non-CHIRP Transducers
Mix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable.
The short pigtail attached to the transducer ends in an Airmar 5-pin female connector. The adapter cables have a matching Airmar 5-pin male connector (shown below) at one end and the correct connector for a specific brand of electronics at the other end.
Both parts are needed for installation. If the user changes equipment brand at some later time, the transducer can be left in place and the adapter cable replaced.
Mix and Match 600W transducers include the B117, B45, B60, P319, P66*, P79, SS505, and SS60. (* not all models)
A 12m (40') extension cable (part MM-5P-5P) is available with one male and one female 5-pin connector.
Note that 600W Mix and Match cables cannot be used with 1kw transducers.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
87.18 |
|
|
B765C-LM Bronze CHIRP Transducer - Needs Mix & Match Cable - Does NOT Work with Simrad & Lowrance
Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 85 kHz of total bandwidth in just one installation, saving customers time and money.
A Thru-Hull Chirp transducer perfectly suited for smaller fishing boats, the B765L/M Chirps across the following bandwidths:*L/M -Low Frequency 40-75 kHz, Medium Frequency 80-130 kHz
* Please Note: The low frequency operating band is 300 W. The medium frequency operating band is 600 W.
Features
Depth & fast-response water-temperature sensor
Low—CHIRPS from 40 kHz to 75 kHz, 32° to 21° beamwidth
Medium—CHIRPS from 80 kHz to 130 kHz, 24° to 16° beamwidth
85 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidth
All the advantages of the larger Thru-Hull Chirp transducers, suitable for smaller boats
Bronze transducer housing with High-Performance Fairing
Boat Size: Up to 9 m (30’) and above
Hull Type: Fiberglass or wood
Exclusive Xducer ID® technology
Hull Deadrise: Up to 24° with a fairing
Acoustic Window: Urethane
Weight: 2.5 kg (5.5 lb)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1250.11 |
|
|
R599 Low/Med Frequency In-Hull Chirp Transducer - Bare Wire
Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 102 kHz of total bandwidth in just one installation, saving customers time and money.
As the ELITE model in the Chirp In-Hull product line, the R599LM Chirps across the following bandwidths: LM Model - Low Frequency 28-60 kHz/Medium Frequency 80-130 kHz.
Features:
Depth Only
Chirp Technology
L/M Frequency
2-3 kW
High-Performance
Epoxy
25 internal ceramics
Exclusive Xducer ID® technology
Specifications:
Hull Deadrise: 0° to 22°
Acoustic Window: Epoxy/urethane
All mounting hardware provided, including tank
Weight: 19.7 kg (43.4 lb)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4865.06 |
|
|
R111-LH Chirp In-Hull Transducer - Bare Wire
Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 117 kHz of total bandwidth in just one installation, saving customers time and money.
A Hard-Core In-Hull model in the Chirp Thru-Hull product line L/H Chirps across the following bandwidths:
L/H Model -Low Frequency 38-75 kHz, High Frequency 130-210 kHz
Features
Depth & fast-response water-temperature sensor
Low—CHIRPS from 38 kHz to 75 kHz 19° to 10° beamwidth
High—CHIRPS from 130 kHz to 210 kHz 8° to 4° beamwidth
117 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 38, 50, and 200 kHz plus everything else in the bandwidth
Fishing Profile: Recreational and commercial inshore and offshore fishing (deep-water canyon and sea-mount tracking)
Urethane transducer housing
Hull Type: Solid fiberglass only
Exclusive Xducer ID® technology
Hull Deadrise: 0° to 22°
Acoustic Window: Epoxy/urethane
All mounting hardware provided, including tank
Weight: 19.7 kg (43.4 lb)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3289.92 |
|