CM599C-LHW Chirp Wide Broadband - No Connector - Bare Wires Features: Pocket/Keel mount wide-beam model with 3000W power rating Depth and fast-response water temperature sensor Wide-beam model with 25° constant beamwidth in High band and 9°-23° beamwidth in Low band With Low (28-60kHz) and High (150-250kHz) frequency bands This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R109LHW Low High Wide Chirp Thru-Hull Transducer with Fairing Block - No Connector Get more coverage under the boat with Airmar’s unique wide-beam, low- and high-frequency, Chirp-ready R109LHW. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25-degree beam for all frequencies, which results in superior resolution. The constantly wide beam provides twice the coverage and clear fish arches on the display compared to most high-frequency, narrow-beam transducers. The high-wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essentially down to 152 m (500'). The low-frequency band and 2 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s Chirp-ready transducer with wide-beam coverage. Features: Depth and fast-response water-temperature sensing 2 kW of power for excellent deep-water performance from the low-frequency 2 kW low frequency (38 to 75 kHz): 19 to 10-degree port-starboard beamwidth; 10 to 5-degree fore-aft beamwidth Maximum depth of 1829 m (6000') 1kW high frequency (150 to 250 kHz): 25-degree constant beamwidth; Maximum depth of 152 m (500') 137 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 68, and 200 kHz plus everything else in the bandwidth High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation High wide beamwidth yields more coverage for detecting fish in the upper-water column Urethane housing with fairing for optimal performance No Connector - Bare Wire Comes with Fairing Block Patented Xducer ID® technology Specifications: Acoustic Window: Epoxy/urethane Common Use: Fishing, commercial fishing Functions: Depth, temperature High Frequency: 150-250 kHz High-Wide Beamwidth: 25 degrees Housing: Urethane Hull Material: Compatible with all hull materials Low-Frequency: 38-75 kHz Low-Frequency Beamwidth: 19-10 degrees Max Deadrise: Up to 22 degrees Max Deadrise Angle: 22 degrees Max Depth: Low frequency- 1829 m (6000'), High wide frequency- 152 m (500') Max Vessel LOA: 9 m (30') and above Mounting Style: Thru-hull Power Rating: 2 kW Retractable housing: No Single or Dual Frequency: CHIRP-ready dual-band Tilted Element: No Weight: 15.1 kg (33.3 lb.) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

PM111 LHW CHIRP 2kW Wide-Beam Chirp-Ready Pocket/Keel Mount - No Connector Get more coverage under your boat with Airmar’s unique wide-beam, high-frequency, Chirp-ready transducer. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high-frequency band results in superior resolution. The constantly wide beam provides twice the coverage and excellent fish arches on the display compared to most high-frequency, narrow-beam transducer options. The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essentially down to 152 m (500'). The low-frequency band and 2 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s dual-frequency, Chirp-ready transducer with wide-beam coverage. Features: The depth and fast-response water-temperature sensor 2 kW of power for great deep-water performance from the low frequency 2 kW low frequency: 38 to 75 kHz 19° to 10° port-starboard beamwidth 10° to 5° fore-aft beamwidth Maximum depth of 1,829 m (6,000') 1 kW high frequency: 150 to 250 kHz 25° constant beamwidth Maximum depth of 152 m (500') 137 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 68, and 200 kHz plus everything else in the bandwidth High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation High wide beamwidth yields more coverage for detecting fish in the upper-water column Urethane housing designed for custom mounting in a cavity Also available in an external (R109LHW) mount Exclusive Xducer ID® technology Specifications: Weight: 13.6 kg (30 lb.) Recommended Boat Length: 12 m (40') and above Hull Material: Solid fiberglass only Hull Deadrise: Accommodates any deadrise angle based on custom cavity construction Acoustic Window: Epoxy/urethane Transducer Element: 16 internal broadband ceramic assemblies This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R509C-LHW CHIRP Transducer Features: Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) 25-Internal, Broadband Ceramic Elements Broadband / CHIRP / Spread Spectrum Operating frequencies: Low—Chirps from 28 kHz to 60 kHz High—Chirps from 130 kHz to 210 kHz Beamwidth (Adjustable): Low—23° to 9° High—8° to 4° 10 m (33’) cable, no connector Fast-response water-temperature sensor Boat size: 12 m (40’) and above Hull Type: Fiberglass, wood, or metal Exclusive Transducer ID® This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

PM275C-LHW CHIRP Transducer Keel-mount 1kW dual-band CHIRP fishfinder transducer. The PM265 is a Pocket/Keel mount unit available in the Low/Medium and Low/High bands. The PM275 is a wide beam version of the PM265 with Low/High bands and a wide beam. Specifications: Type: CHIRP dual-band fishfinder transducer LM Version: Low Band 42-65 kHz / Beam width 25-16° // Medium Band 85-135 kHz / Beam width 16-11° LH Version: Low Band 42-65 kHz / Beam width 25-16° // High Band 130-210 kHz / Beam width 10-6° LHW Version: Low Band 42-65 kHz / Beam width 25-16° // High Wide Band 150-250 kHz / Beam width 25° Power Rating: 1000 watts Mounting: Pocket/Keel Mount Housing: Urethane Hull Aperture: 1.75" (44.5mm) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

No Connector Mix & Match CHIRP Cable - 1M Airmar's Mix & Match CHIRP Cable with no connector. Features: Length: 1M No Connector This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Airmar R109LM Thru-Hull Transducer - Bare Wires Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000M (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 107 kHz of total bandwidth in just one installation, saving customers time and money. As the HARD CORE model in the Chirp Thru-Hull product line, the R109LM Chirps across the following bandwidths: LM Model - Low Frequency 38-75 kHz/Medium Frequency 80-130 kHz Features: Depth & fast-response water-temperature sensor Low—CHIRPS from 38 kHz to 75 kHz 19° to 10° port-starboard beamwidth (10° to 5° fore-aft beamwidth) Medium—CHIRPS from 80 kHz to 130 kHz 13° to 8° beamwidth 87 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 38, 50, 88, and107 kHz plus everything else in the bandwidth Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) Urethane transducer housing with High-Performance Fairing Boat Size: 12 m (40’) and above Hull Type: Fiberglass, wood, or metal Exclusive Xducer ID® technology Specifications: Hull Deadrise: 0° to 25° Acoustic Window: Epoxy/urethane Weight: 15.1 kg (33.3 lb) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R111-LH Chirp In-Hull Transducer - Bare Wire Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 117 kHz of total bandwidth in just one installation, saving customers time and money. A Hard-Core In-Hull model in the Chirp Thru-Hull product line L/H Chirps across the following bandwidths: L/H Model -Low Frequency 38-75 kHz, High Frequency 130-210 kHz Features Depth & fast-response water-temperature sensor Low—CHIRPS from 38 kHz to 75 kHz 19° to 10° beamwidth High—CHIRPS from 130 kHz to 210 kHz 8° to 4° beamwidth 117 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 38, 50, and 200 kHz plus everything else in the bandwidth Fishing Profile: Recreational and commercial inshore and offshore fishing (deep-water canyon and sea-mount tracking) Urethane transducer housing Hull Type: Solid fiberglass only Exclusive Xducer ID® technology Hull Deadrise: 0° to 22° Acoustic Window: Epoxy/urethane All mounting hardware provided, including tank Weight: 19.7 kg (43.4 lb) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R599 Low/Med Frequency In-Hull Chirp Transducer - Bare Wire Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 102 kHz of total bandwidth in just one installation, saving customers time and money. As the ELITE model in the Chirp In-Hull product line, the R599LM Chirps across the following bandwidths: LM Model - Low Frequency 28-60 kHz/Medium Frequency 80-130 kHz. Features: Depth Only Chirp Technology L/M Frequency 2-3 kW High-Performance Epoxy 25 internal ceramics Exclusive Xducer ID® technology Specifications: Hull Deadrise: 0° to 22° Acoustic Window: Epoxy/urethane All mounting hardware provided, including tank Weight: 19.7 kg (43.4 lb) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R409C-LWM Wide-Beam Chrip Transducer - Low/Wide/Medium - Bare Wire Outfish the competition with AIRMAR’s new tournament series Ultra Wide Beam Chirp transducers. Now, get even MORE coverage under the boat. These Ultra Wide transducers offer a 40 degree beamwidth. Combining a low-frequency range of 40 to 60 kHz with a medium-frequency range of 80 to 130 kHz, this tournament series reveals more fish in the water column than ever before and is being reported by captains as the best transducer option. Don’t miss the fish—install this transducer for your next tournament season. You’ll be impressed with the results on your Chirp display! Features CHIRPs across the following bandwidths: Low Frequency 40 to 60 kHz, 40° Constant Beamwidth Medium Frequency 80 to 130 kHz, 13° to 8° Beamwidth Depth & fast response water-temperature sensor Thru-Hull 2kW Urethane housing Hull Type: Fiberglass only Exclusive Xducer ID® technology Hull Deadrise: 0° to 25° Acoustic Window: Epoxy/urethane Weight: 15.1 kg (33.3 lb) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B175MW Med Ultra Wide 1kW, 20° Chirp Thru-Hull Transducer f/12-Pin Garmin175MW Med Ultra Wide 20 Degree, 1KW Chirp Thru-hull Transducer with 12 Pin Connector for Garmin  Airmar's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column. Airmar’s Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow. The B175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20° angle. Because the transducer is installed almost flush with the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer. Features: Fixed 20° tilted version for 16° to 24° hull deadrise 12 Pin Connector for Garmin FishFinders Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing, or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology Specifications: Brand: Airmar Technology Acoustic Window: Urethane Cable-Length: 9 m (30'), 10 m (33') Common Use: Fishing Connector: Garmin 12-Pin Country of Origin: USA Display Connector: 12G Functions: Depth, Temperature Hole Size: 95 mm (3-3/4") Hull Material: Fiberglass or wood Material: Bronze Max Deadrise Angle: 24° Max Depth: 400 m (1300') Max Vessel LOA: Up to 11 m (36') Medium Frequency: 60-100 kHz Medium Frequency Beamwidth: 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Medium-Wide Beamwidth: 57° to 73° beam p/s 16° average f/a Mounting Style: Tilted Element Thru-Hull Power Rating: 1 kW Single or Dual Frequency: Single Tilt Angle: 20° Tilted Element: Yes Water Temperature: -10° to 40°C (14° to 104°F) Weight: 2.7 kg (6 lbs.) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B175MW Med Ultra Wide 20°, 1KW Chirp Thru-Hull Transducer with 8-Pin Connector for Garmin  Airmar’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column. Airmar’s Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow. The B175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20° angle. Because the transducer is installed almost flush with the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer. Features: Fixed 20° tilted version for 16° to 24° hull deadrise 8 Pin Connector for Garmin FishFinders Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing, or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology Specifications: Brand: Airmar Technology Acoustic Window: Urethane Cable-Length: 9 m (30'), 10 m (33') Common Use: Fishing Connector: Garmin 8-Pin Country of Origin: USA Display Connector: 8G Functions: Depth, Temperature Hole Size: 95 mm (3-3/4") Hull Material: Fiberglass or wood Material: Bronze Max Deadrise Angle: 24° Max Depth: 400 m (1300') Max Vessel LOA: Up to 11 m (36') Medium Frequency: 60-100 kHz Medium Frequency Beamwidth: 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Medium-Wide Beamwidth: 57° to 73° beam p/s 16° average f/a Mounting Style: Tilted Element Thru-Hull Power Rating: 1 kW Single or Dual Frequency: Single Tilt Angle: 20° Tilted Element: Yes Water Temperature: -10° to 40°C (14° to 104°F) Weight: 2.7 kg (6 lbs.) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R509C-LH CHIRP Transducer Features: Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) 25-Internal, Broadband Ceramic Elements Broadband / CHIRP / Spread Spectrum Operating frequencies: Low—Chirps from 28 kHz to 60 kHz High—Chirps from 130 kHz to 210 kHz Beamwidth (Adjustable): Low—23° to 9° High—8° to 4° 10 m (33’) cable, no connector Fast-response water-temperature sensor Boat size: 12 m (40’) and above Hull Type: Fiberglass, wood, or metal Exclusive Transducer ID® This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B175MW Med Ultra Wide 1kW, 20° Chirp Thru-Hull 12-Pin Transducer for Furuno TZTouch3 The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column. Airmar’s Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow. The B175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20° angle. Because the transducer is installed almost flush with the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer. Features: Fixed 20° tilted version for 16° to 24° hull deadrise 12 Pin Connector for Furuno TZTouch3 12" and 16" Displays Depth and fast-response water-temperature sensor 1 kW with depth tracking down to 400 m (1,300#39;) Medium frequency: 60-100 kHz 57° to 73° beamwidth (port/starboard) 16° average fore/aft 40 kHz of total bandwidth from one transducer Medium frequency for superior mid-depth performance and excellent fish-target separation Bronze housing for use on stepped, planing, or displacement hull Low-profile, thru-hull housing yields good resolution at speed when installed properly Exclusive Xducer ID® technology Specifications: Brand: Airmar Technology Acoustic Window: Urethane Cable-Length: 9 m (30'), 10 m (33') Common Use: Fishing Connector: Furuno 12 Pin Country of Origin: USA Display Connector: 12 Pin Functions: Depth, Temperature Hole Size: 95 mm (3-3/4") Hull Material: Fiberglass or wood Material: Bronze Max Deadrise Angle: 24° Max Depth: 400 m (1300') Max Vessel LOA: Up to 11 m (36') Medium Frequency: 60-100 kHz Medium Frequency Beamwidth: 57° to 73° (Port/Starboard) X 16° average (Fore/Aft) Medium-Wide Beamwidth: 57° to 73° beam p/s 16° average f/a Mounting Style: Tilted Element Thru-Hull Power Rating: 1 kW Single or Dual Frequency: Single Tilt Angle: 20° Tilted Element: Yes Water Temperature: -10° to 40°C (14° to 104°F) Weight: 2.7 kg (6 lbs.) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R109LH Urethane Chirp Thru-Hull with Temp & High Speed Fairing Block - No Connector Transducer Features: Airmar R109 Housing Style Transducer The Broadband R109 operates at any frequency between 38 kHz to 75kHz and 130 kHz to 210 kHz. Adjusting the frequency allows you to change the R109's beamwidth and depth capabilities. For example if you are bottom fishing in 61 m (200') of water, the narrow high-frequency beam will display extreme bottom detail and fish holding tight to structure. If you are tuna or marlin fishing in deep blue water, the wider, low-frequency beam will not only give deep-water bottom detail, but more importantly show you more of what is around your vessel, including bait which may attract game fish. Because the R109 has a bandwidth that covers a continuous frequency spectrum, next generation Fish Finders utilizing Furuno Free Synthesizer (FFS) technology can be made “tunable”, so fishermen can “dial-in” the best frequency for the target fish species or conditions. Standard Features: Thru-Hull Transducer with High Performance Fairing Block Kit 3kW Low Frequency, 2kW High Frequency Furuno Free Synthesizer (FFS) compatible - select any two frequencies from 38 kHz to 75kHz and 130 kHz to 210 kHz Beam angle dependent upon frequency: Low = 19 degrees to 10 degrees port-starboard (10 degrees to 5 degrees fore-aft) High = 8 degrees to 4 degrees No Connector Designed for 40ft and above boats made of fiberglass, wood or metal WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.