|
R509C-LM CHIRP 3KW Transducer
Unlock the true potential of your fish-finder with the superior quality and performance of an AIRMAR Chirp-ready transducer.
Features:
Depth & fast-response water-temperature sensor
Epoxy transducer housing with high-performance fairing
For use on hulls up to 25° deadrise
82 kHz of total bandwidth from one transducer
Benefits of Thru-Hull Transducers with High-Performance Fairing:
The best performance on vessels 25 feet and up because the transducer face is in “clean” water below the boundary layer (bubbles running down the hull)
The fairing compensates for hull deadrise and reduces turbulence over the transducer face, which allows tracking at speeds over 30 knots (35 MPH)
When mounted in clean water (forward of propellers and running gear), thru-hulls produce the most effective signal return since nothing on the vessel interferes with the transducer’s active surface
Specifications:
Boat Size: 12 m (40 ft.) and above
Hull Type: Fiberglass, wood, or metal
Engine Type: Inboard, outboard or I/O
Low (28 kHz to 60 kHz):
23° to 9° port/starboard
11° to 5° fore-aft beamwidth
Maximum depth 10000 ft
Medium (80 kHz to 130 kHz):
13° to 8° beamwidth
Maximum depth 3000 ft.
Bottom Coverage Relative to Frequency and Depth
Depth (50 ft.): 10 ft.
Depth (100 ft.): 24 ft.
Depth (300 ft.): 68 ft.
Depth (600 ft.): 136 ft.
Depth (1000 ft.): 228 ft.
Depth (1500 ft.): 340 ft.
Depth (2000 ft.): 456 ft.
Depth (2500 ft.): 570 ft.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4453.13 |
|
|
R509C-LH CHIRP Transducer
Features:
Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
25-Internal, Broadband Ceramic Elements
Broadband / CHIRP / Spread Spectrum
Operating frequencies:
Low—Chirps from 28 kHz to 60 kHz
High—Chirps from 130 kHz to 210 kHz
Beamwidth (Adjustable):
Low—23° to 9°
High—8° to 4°
10 m (33’) cable, no connector
Fast-response water-temperature sensor
Boat size: 12 m (40’) and above
Hull Type: Fiberglass, wood, or metal
Exclusive Transducer ID®
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4150.31 |
|
|
R509C-LHW CHIRP Transducer
Features:
Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
25-Internal, Broadband Ceramic Elements
Broadband / CHIRP / Spread Spectrum
Operating frequencies:
Low—Chirps from 28 kHz to 60 kHz
High—Chirps from 130 kHz to 210 kHz
Beamwidth (Adjustable):
Low—23° to 9°
High—8° to 4°
10 m (33’) cable, no connector
Fast-response water-temperature sensor
Boat size: 12 m (40’) and above
Hull Type: Fiberglass, wood, or metal
Exclusive Transducer ID®
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4334.37 |
|
|
TM265C-LM-12F Transom Mount Transducer with 12-Pin Connector for Furuno TZT12F, TZT16F & TZT19F
Rely on Airmar's broadband transducers for the ultimate fishing mission! Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town. Traditional marine fishfinders operate at discreet frequencies such as 50 kHz and 200 kHz, use relatively short-duration pulses, and use narrowband sonar transducers. In contrast, CHIRP uses a precise sweep pattern of many frequencies within a long-duration transmits pulse from a broadband transducer, so the equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine fishfinder.
Specifically designed for smaller boats (25'-40'), the TM265C-LM CHIRPS across the following bandwidths:
Low & Medium-Frequency (LM)
Low—Chirps from 42 kHz to 65 kHz, 25° to 16° beamwidth
Medium—Chirps from 85 kHz to 135 kHz, 16° to 11° beamwidth
Medium-frequency benefits include the ability to sound deeper than the high-frequency, along with better target resolution than the low-frequency
Features:
8-Internal, Broadband Ceramic Elements
Depth & fast-response water-temperature sensor
Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
Operating frequencies:
Low—Chirps from 42 kHz to 65 kHz
Medium—Chirps from 85 kHz to 135 kHz
Beamwidth (Adjustable):
Low—25° to 16°
Medium—24° to 16°
10 m (33’) cable
The depth and fast-response water-temperature sensor
12 Pin Connector for use with Furuno TZT12F and TZT16F Displays
Urethane transducer housing and stainless steel mounting bracket
Boat Size: 8 m to 12 m (25’ to 40’)
Hull Type: Fiberglass, wood, or metal
Exclusive Transducer ID
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1852.50 |
|
|
B265LM Bronze Chirp Thru-Hull Transducer 1kW with Fairing Block - Mix & Match Cable Needed
The B265LM Chirp-ready transducer is the perfect mid-range to deep performing transducer in the Airmar line. Covering a huge bandwidth, the frequency performance on many species delivers crisp, clear target separation. This 1 kW powerhouse transducer delivers extreme target detail, bottom discrimination, and bait and game fish separation at all depths. The included High-Performance Fairing will give you broadband performance at speeds over 30 knots (34 MPH). We will leave it up to you to discover the rest of the secrets that can be unlocked with tunable, Chirp Broadband Transducer Technology.
LM Model - Low Frequency 42-65 kHz/Medium Frequency 85-135 kHz
Features:
Depth & fast-response water-temperature sensor
1kW power for excellent deep to mid-depth performance
Low frequency: 42 kHz to 65 kHz
25° to 16° beamwidth (port-starboard)
Maximum depth 3000' (914 m)
Medium frequency: 85 kHz to 135 kHz
16° to 11° beamwidth
Maximum depth 1500' (457M)
73 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidths
Bronze transducer housing with High-Performance Fairing for improved high speed performance
Recommended boat size: 8 m (25') and above
Hull Type: Fiberglass or wood
Models also available in Transom Mount (TM265LM), Pocket Mount (PM265LM), Cavity Mount (CM265LM), In-Hull (M265LM)
Exclusive Xducer ID® technology
Specifications:
Hull Deadrise: Up to 20° with fairing
Acoustic Window: Urethane
Weight: 7.3 kg (16 lb)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1826.59 |
|
|
R111C-LM In-Hull Chirp 2KW Transducer
L/M Model -Low Frequency 38-75 kHz, Medium Frequency 80-130 kHz
Features
Depth & fast-response water-temperature sensor
Low—CHIRPS from 38 kHz to 75 kHz 19° to 10° beamwidth
Medium—CHIRPS from 80 kHz to 130 kHz 13° to 8° beamwidth
87 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 38, 50, 88, and 107 kHz plus everything else in the bandwidth
Fishing Profile: Recreational and commercial inshore and offshore fishing (deep-water canyon and sea-mount tracking)
Urethane transducer housing
Hull Type: Solid fiberglass only
Exclusive Xducer ID® technology
Specifications
Hull Deadrise: 0° to 22°
Acoustic Window: Epoxy/urethane
All mounting hardware provided, including tank
Weight: 19.7 kg (43.4 lb)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3384.37 |
|
|
PM275C-LHW CHIRP Transducer
Keel-mount 1kW dual-band CHIRP fishfinder transducer.
The PM265 is a Pocket/Keel mount unit available in the Low/Medium and Low/High bands. The PM275 is a wide beam version of the PM265 with Low/High bands and a wide beam.
Specifications:
Type: CHIRP dual-band fishfinder transducer
LM Version: Low Band 42-65 kHz / Beam width 25-16° // Medium Band 85-135 kHz / Beam width 16-11°
LH Version: Low Band 42-65 kHz / Beam width 25-16° // High Band 130-210 kHz / Beam width 10-6°
LHW Version: Low Band 42-65 kHz / Beam width 25-16° // High Wide Band 150-250 kHz / Beam width 25°
Power Rating: 1000 watts
Mounting: Pocket/Keel Mount
Housing: Urethane
Hull Aperture: 1.75" (44.5mm)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1897.84 |
|
|
PM111 LHW CHIRP 2kW Wide-Beam Chirp-Ready Pocket/Keel Mount - No Connector
Get more coverage under your boat with Airmar’s unique wide-beam, high-frequency, Chirp-ready transducer. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high-frequency band results in superior resolution. The constantly wide beam provides twice the coverage and excellent fish arches on the display compared to most high-frequency, narrow-beam transducer options.
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essentially down to 152 m (500').
The low-frequency band and 2 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s dual-frequency, Chirp-ready transducer with wide-beam coverage.
Features:
The depth and fast-response water-temperature sensor
2 kW of power for great deep-water performance from the low frequency
2 kW low frequency: 38 to 75 kHz
19° to 10° port-starboard beamwidth
10° to 5° fore-aft beamwidth
Maximum depth of 1,829 m (6,000')
1 kW high frequency: 150 to 250 kHz
25° constant beamwidth
Maximum depth of 152 m (500')
137 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50, 68, and 200 kHz plus everything else in the bandwidth
High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation
High wide beamwidth yields more coverage for detecting fish in the upper-water column
Urethane housing designed for custom mounting in a cavity
Also available in an external (R109LHW) mount
Exclusive Xducer ID® technology
Specifications:
Weight: 13.6 kg (30 lb.)
Recommended Boat Length: 12 m (40') and above
Hull Material: Solid fiberglass only
Hull Deadrise: Accommodates any deadrise angle based on custom cavity construction
Acoustic Window: Epoxy/urethane
Transducer Element: 16 internal broadband ceramic assemblies
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3235.97 |
|
|
SS75 High Chirp 12 Degree Bronze Thru-Hull xSonic Transducer
Airmar’s low-profile, Chirp-ready transducer models are the perfect addition to smaller boats, such as center consoles. The high-frequency band has a narrow beamwidth, excellent for pinpointing fish holding tight to wrecks, reefs, and other structures. High frequency also shows amazing target separation on baitfish and schooling gamefish. The SS75H transducer, operating at 130 to 210 kHz, delivers up to 80 kHz of total bandwidth in just one installation for outstanding bottom detail and fish-target resolution.
This Tilted Element™ transducer has the element fixed at a 12-degree angle within the housing. Because the transducer is installed almost flush with the hull, the tilt corrects for the hull deadrise. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.
Features:
Depth and fast-response water-temperature sensing
600 W of power with a maximum depth of 214 m (700')
High frequency (130 to 210 kHz)
15- 9 degree beamwidth
High frequency delivers great shallow-water performance, bottom detail, and clear fish-target returns
Low-profile, thru-hull housing provides good display resolution at speed when installed properly
Recommended for stepped, planning, or displacement hull
Stainless steel housing for use in all hull materials
Patented Xducer ID® technology
Specifications:
Brand: Airmar Technology
Acoustic Window: Urethane
Cable-Length: 10 m (33')
Common Use: Fishing, Commercial Fishing
Connector: Simrad 9-Pin, Lowrance 9-Pin, Navico 9-Pin
Country of Origin: USA
Cross Reference: 000-13912-001
Deadrise Range: 8-15 degrees
Display Connector: 9N
Frequency Band: High
Functions: Depth, Temperature
High Frequency: 130-210 kHz
High Frequency Beamwidth: 15-9 degrees
Hole Size: Fiberglass or wood hull—70 mm or 2-13/16", Metal hull—79 mm or 3-1/8"
Hull Material: Compatible w/ all hull materials
Material: Stainless Steel
Max Deadrise: Up to 24 degrees
Max Deadrise Angle: 24 degrees
Max Depth: 214 m (700')
Max Vessel LOA: Up to 8 m (26')
Mix and Match Series: 12-Pin Chirp
Mounting Style: Tilted Element Thru-Hull
Power Rating: 600 W
Retractable housing: No
Sensor Connector: MMC
Single or Dual Frequency: CHIRP-Ready Single-Band
Tilt Angle: 12 degrees
Tilted Element: Yes
Weight: 1.4 kg (3 lbs.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
861.48 |
|
|
Airmar R111LH 2kW In-Hull Transducer, CHIRP Low (38-75kHz) & CHIRP High (130-210kHz)
This in-hull transducer uses narrow beams at low/high frequencies to display depth and temperature data to your Garmin Marine Network via your sonar, such as the GSD 26.
Designed to allow both traditional and Spread Spectrum scanning, this 2kW barewire, plastic transducer has a maximum depth of 8,000 ft; an operating frequency of 38 to 75 kHz and 130 to 210 kHz; and a beamwidth of 10x19 degrees. The in-hull mounts on a 0-25° deadrise angle; the pocket mount is installation dependent.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
*In-hull not recommended for cored-hull vessels
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2828.99 |
|
|
3kW Transducer - 50kHz
External Install Type with FRP Housing, 3kW Power rating a frequency of 50kHz.
Features:
50kHz FRP Transducer
3kW
9 x 14 degree Directional Pattern
15m Cable, no connector
Weight = 7.8kg
160mm x 210mm x 96mm
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4830.22 |
|
|
B265LH Bronze Chirp Thru Hull 1kW with Fairing Block
Requires Mix and Match Cable
Imagine knowing what exact frequencies work the best at detecting specific fish species: Bluefin Tuna—60 kHz, Squid—133 kHz, and Cod—175 kHz. Now imagine tuning your fish finder to these frequencies, marking the fish precisely on the screen, then catching them! With the B265 transducer connected to a tunable fish finder, you too can have a log book like a commercial fisherman. This powerhouse transducer delivers extreme target detail, bottom discrimination, and bait and game fish separation at all depths. The B265LH is packed with a seven-element, low-frequency array that operates at anywhere between 42 kHz and 65 kHz. It has a wide, 25° beam that will adjust by several degrees as the frequency is tuned up or down the band. The single, high-frequency ceramic operates at any frequency between 130 kHz and 210 kHz and has a narrow, 6° beam that is adjustable by several degrees. The included High-Performance Fairing will give you broadband performance at speeds over 30 knots (34 MPH). We will leave it up to you to discover the rest of the secrets that can be unlocked with tunable, Chirp Broadband Transducer Technology.
Features:
Depth & fast-response water-temperature sensor
Low—CHIRPS from 42 kHz to 65 kHz 25° to 16° port-starboard beamwidth
High—CHIRPS from 130 kHz to 210 kHz 10° to 6° beamwidth
103 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth
Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
Bronze transducer housing with High-Performance Fairing
Boat Size: 8 m (25’) and above
Hull Type: Fiberglass or wood
Exclusive Xducer ID® technology
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1638.76 |
|
|
Garmin 8-Pin Mix & Match Cable for Low-Frequency CHIRP 1kW Transducers
Airmar's 8-Pin Mix & Match Chirp Cable specifically for Garmin.
Features:
8-Pin
Low-Frequency CHIRP Cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
114.00 |
|
|
TM265C-LH Transom Mount CHIRP - 1kW Transducer
Transom-mounted 1kW dual-band CHIRP fishfinder transducer.
The TM265 is available in the Low/Medium and Low/High bands. A Low/High widebeam model exists with the designation TM275.
Specifications:
Low/High Bands
1000 Watts
Transom Mount
Housing: Urethane
Requires Mix and Match Cable for the Sounder its going into
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1470.34 |
|
|
Element 9 S Combo High CHIRP - No Transducer - No Chart
The Element S series of navigation displays gives you the freedom to enjoy the open waters—Select your destination and let Element’s fast and accurate 10Hz GPS/GNSS lead the way. Engineered for simplicity and aff ordable performance, Element S will quickly become your trusted cruising companion. A quad-core processor off ers responsive performance and Element’s all-weather, sunlight viewable displays deliver chart and navigation data in beautiful color. Element’s simple and straightforward LightHouse Sport operating system lets you navigate with confi dence. Once underway, Element S will keep you on course with a smart list of user-friendly features, such as AIS target overlays, autopilot integration, and sailing instruments displays.
TRUSTED CRUISING COMPANION
Easy planning and GPS navigation with your favorite charts.
Support for Raymarine LightHouse™ charts, Navionics, and C-MAP
Safely navigate busy waterways with an optional Quantum™ wireless radar and AIS receiver
Built-in High CHIRP sonar for depth and bottom contour imaging
Map uncharted areas with Raymarine RealBathy™ personal sonar mapping
Connect with NMEA2000 compatible AIS, autopilot, sailing instruments, engines, tanks and VHF
SIMPLE AND STRAIGHT FORWARD
Element’s LightHouse Sport OS Designed for boaters that like to keep things simple.
From sailing to power cruising to fi shing, the LightHouse Sport OS is easy to customize to your type of boating
An oversized waypoint key for quick and easy marking of your favorite locations
Three user-programmable quick keys to access your favorite pages with one button push
Live menus let you customize charts while seeing the navigation display change in real time
SUPERIOR PERFORMANCE
Enjoy legendary Raymarine display and navigation technology at an affordable price.
7, 9, and 12 inch super bright display for all weather conditions
Category-leading quad-core processor delivers fast chart redraw and responsive performance
Fast and accurate 10hz GPS/GNSS sensor
Rugged design and backed by Raymarine’s three-year warranty (product registration required)
High CHIRP Transducers
Compatible with the CPT-S family of transom and thru-hull transducers.
Connections:
Power
NMEA2000 integration with AIS, autopilot, sailing instruments, engines, tanks sensors, and VHF
Wi-Fi connection to Quantum radar
|
623.99 |
|