R599 Low/Med Frequency In-Hull Chirp Transducer - Bare Wire Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 102 kHz of total bandwidth in just one installation, saving customers time and money. As the ELITE model in the Chirp In-Hull product line, the R599LM Chirps across the following bandwidths: LM Model - Low Frequency 28-60 kHz/Medium Frequency 80-130 kHz. Features: Depth Only Chirp Technology L/M Frequency 2-3 kW High-Performance Epoxy 25 internal ceramics Exclusive Xducer ID® technology Specifications: Hull Deadrise: 0° to 22° Acoustic Window: Epoxy/urethane All mounting hardware provided, including tank Weight: 19.7 kg (43.4 lb) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Low/High Frequency - In-Hull Chirp Transducer without Connector Rely on Airmar's new broadband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000') with 5 to 10 times greater detail and resolution so precise it_s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 112 kHz of total bandwidth in just one installation, saving customers time and money. As the ELITE model in the Chirp In-Hull product line, the R599 LH Chirps across the following bandwidths: LH Model - Low Frequency 28-60 kHz/High Frequency 130-210 kHz Features: Depth only Low-CHIRPS from 28 kHz to 60 kHz 23° to 9° beamwidth High-CHIRPS from 130 kHz to 210 kHz 8° to 4° beamwidth 112 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 28, 38, 50, and 200 kHz plus everything else in the bandwidth Fishing Profile: Recreational and commercial inshore and offshore fishing (deep-water canyon and sea-mount tracking) Epoxy transducer housing Hull Type: Solid fiberglass only Specifications: Hull Deadrise: 0° to 22° Acoustic Window: Epoxy/urethane All mounting hardware provided, including tank Weight: 19.7 kg (43.4 lb) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

CPT-S In-Hull CHIRP Transducer The CPT-S In-hull transducer provides a simple-to-install depth only transducer solution for non-cored fiberglass hulls. Ideal for sailing, cruising, and small powerboat applications, the CPTS-S In-hull transducer supports CHIRP sonar operation centered on 200kHz.  The CPT-S in-hull directly connects to Element S series units. Will connect to Axiom RV/Axiom Pro RVX and Element HV using the A80490 (Axiom) or A80559 (Element HV) adapters. An innovative transducer tube housing design allows the CPT-S In-Hull to mount in hulls ranging from 0 to 25 degrees deadrise.

Airmar R109LM Thru-Hull Transducer - Bare Wires Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000M (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 107 kHz of total bandwidth in just one installation, saving customers time and money. As the HARD CORE model in the Chirp Thru-Hull product line, the R109LM Chirps across the following bandwidths: LM Model - Low Frequency 38-75 kHz/Medium Frequency 80-130 kHz Features: Depth & fast-response water-temperature sensor Low—CHIRPS from 38 kHz to 75 kHz 19° to 10° port-starboard beamwidth (10° to 5° fore-aft beamwidth) Medium—CHIRPS from 80 kHz to 130 kHz 13° to 8° beamwidth 87 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 38, 50, 88, and107 kHz plus everything else in the bandwidth Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) Urethane transducer housing with High-Performance Fairing Boat Size: 12 m (40’) and above Hull Type: Fiberglass, wood, or metal Exclusive Xducer ID® technology Specifications: Hull Deadrise: 0° to 25° Acoustic Window: Epoxy/urethane Weight: 15.1 kg (33.3 lb) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B275LHW Bronze Thru-Hull CHIRP Transducer - 12-Pin Bronze, Thru-Hull CHIRP Transducer with Temp, with 12-Pin Connector, Low-Freq: 42-65 kHz, High-Freq: 150-250 kHz. The 275LH-W series transducers are truly broadband at its best. Paired with Furuno’s DFF1-UHD, the B275LH-W provides a high frequency range of 150-250Khz and a constant 25° beamwidth. The “W” stands for wide and that’s what the B275LH-W really delivers. Unlike traditional high frequency (200kHz) transducers that provide narrow performance, this unique, new wide beam/high frequency design achieves over six times the coverage under the boat compared to standard high-frequency CHIRP Transducers. The B275LH-W is also compatible with the FCV295 and FCV1150 variable frequency Fish Finders, providing the same frequency range with a 25° wide beamwidth provided at every frequency. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R111-LH Chirp In-Hull Transducer - Bare Wire Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 117 kHz of total bandwidth in just one installation, saving customers time and money. A Hard-Core In-Hull model in the Chirp Thru-Hull product line L/H Chirps across the following bandwidths: L/H Model -Low Frequency 38-75 kHz, High Frequency 130-210 kHz Features Depth & fast-response water-temperature sensor Low—CHIRPS from 38 kHz to 75 kHz 19° to 10° beamwidth High—CHIRPS from 130 kHz to 210 kHz 8° to 4° beamwidth 117 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 38, 50, and 200 kHz plus everything else in the bandwidth Fishing Profile: Recreational and commercial inshore and offshore fishing (deep-water canyon and sea-mount tracking) Urethane transducer housing Hull Type: Solid fiberglass only Exclusive Xducer ID® technology Hull Deadrise: 0° to 22° Acoustic Window: Epoxy/urethane All mounting hardware provided, including tank Weight: 19.7 kg (43.4 lb) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B150M Bronze Thru-Hull Chirp Transducer - Med Frequency - 0° Features: Frequency: Chirp 95-155 kHz Power Rating: 300W Connector: 10 Pin Tilt: 0 Degree Deadrise of Hull: 0-7 degrees This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SS75M Stainless Steel Thru-Hull Chirp Transducer - 12° Tilt - Med Frequency Features: Frequency: Chirp 80 - 130 kHz Power Rating: 600 Watts Connector: 10 Pin Tilt: 12 Degree Deadrise of Hull: 8-15 Degrees This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SS75M Stainless Steel Thru-Hull Chirp Transducer - 20° Tilt - Med Frequency Features: Frequency: Chirp 80 - 130 kHz Power Rating: 600 Watts Connector: 10 Pin Tilt: 20 Degree Deadrise of Hull: 16-24 Degrees This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B785M Bronze Thru-Hull Chirp Transducer with High Speed Fairing Block Features: Frequency: Chirp 80 - 130 kHz Power Rating: 600 Watts Connector: 10 Pin Fairing Block: High Speed Fairing Block Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B265LH Bronze Thru-Hull CHIRP Transducer - 12-Pin Bronze, Thru-Hull CHIRP Transducer with 12-Pin Connector, Low-Freq: 42-65 kHz, High-Freq: 130-210 kHz. The B265LH is a bronze thru-hull CHIRP transducer for use with Furuno's CHIRP broadband Fish Finders. The B265LH comes complete with high-speed fairing block Traditional marine Fish Finders operate at discrete frequencies such as 50 kHz and 200 kHz, use relatively short-duration transmit pulses, and use narrowband sonar transducers. In contrast, CHIRP (Compressed High-Intensity Radar Pulse) uses a precise sweep pattern of many frequencies within a long-duration transmit pulse from a broadband transducer. The equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine Fish Finder. The echo energy returning to the transducer is likewise superior to that generated by a conventional transducer. The combination of CHIRP, a broadband transducer, and Furuno’s superior Digital Signal Processing, results in dramatically increased fish and bottom detection. The B265LH CHIRPS across the following bandwidths:  Low-Frequency: 42-65 kHz High-Frequency: 130-210 kHz This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

M260 In-Hull 1kW Transducer with No Connector In-hull features, thru-hull performance. Setting the In-Hull Standard It's true! Excellent performance can be achieved from an in-hull mounted transducer. The M260, Airmar's 1 kW in-hull, is designed with Airmar's exclusive Broadband Ceramic Technology. The 200 kHz element provides broadband performance resulting in higher resolution without sacrificing sensitivity. Combined with a seven-element 50 kHz array, this in-hull has excellent. All-Out Fishfinding Performance! Optimal fishfinder performance no longer requires drilling a hole in the hull! The M260 is able to transmit and receive through solid fiberglass while displaying sharp detailed images. Track the bottom at speeds exceeding 30 knots! Installation simply requires adhering the tank to the inside of the vessel, leaving a clean and smooth hull exterior! Features M260 Transducer with In-Hull Kit 1,000 Watts Power 50/200 kHz w/Diplexer 19/6 degree Beam Angles Interfaces to any 600W or 1kW echosounder Recommended for solid fiberglass hulls Innovative tank design allows for bow-stern or port-starboard mounting Available with a diplexer for single transmission line fishfinders and without a diplexer for dual transmission line fishfinders Mineral oil or non-toxic anti-freeze (propylene glycol) is used to fill the tank Transducer ID™ feature WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

M265LH Plastic In-Hull Mount Transducer w/Depth - 12-Pin Garmn's best performing 1 kW in-hull, this narrow beam transducer provides crisp image detail. The transducer has a depth of 3,000 feet; an operating frequency of 42 to 65 kHz and 130 to 210 kHz; a beamwidth of 16 to 25 degrees or 6 to 10 degrees; and a 0 to 30 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. *Not recommended for cored-hull vessels Compatible Devices: GPSMAP® 7607xsv, 7608xsv, 7610xsv, 7612xsv, 7616xsv GSD™ 25 Premium Sonar Module WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SS175L Stainless Steel 12° Thru Hull Mix & Match Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money. Features: Designed for smaller boats up to 36 feet (11M) A tilted element model in the Chirp Thru-Hull product line, the SS175L Chirps across the following bandwidth: L Model - Low Frequency 40-60 kHz Depth & fast-response water-temperature sensor Low—CHIRPS from 40 kHz to 60 kHz, 32° to 21° beamwidth 12° tilted  35 kHz of total bandwidth from one transducer Covers popular fishing frequency of 50 kHz plus everything else in the bandwidth Steel transducer housing Hull Type: Steel or aluminum Exclusive Xducer ID® technology Hull Deadrise: 8 to 15 degree Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SS175L Stainless Steel 20° Thru Hull Mix & Match Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money. Features: Designed for smaller boats up to 36 feet (11M) A tilted element model in the Chirp Thru-Hull product line, the SS175L Chirps across the following bandwidth: L Model - Low Frequency 40-60 kHz Depth & fast-response water-temperature sensor Low—CHIRPS from 40 kHz to 60 kHz, 32° to 21° beamwidth 20° tilted 35 kHz of total bandwidth from one transducer Covers popular fishing frequency of 50 kHz plus everything else in the bandwidth Steel transducer housing Hull Type: Steel or aluminum Exclusive Xducer ID® technology Hull Deadrise: 16 to 24 degrees Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.