|
7649 Mini Add-A-Battery Kit - Boxed Packaging
What does the Mini Add-A-Battery do?
Adding a second battery prevents getting stranded with a dead battery by isolating the start battery from the house loads that can quickly discharge a battery.
The Mini Add-A-Battery offers a compact, simple way to control the switching with the m-Series Dual Circuit PlusT Battery Switch and automatically share a single source of charging between two batteries with the Mini ACR Automatic Charging Relay.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
108.82 |
|
|
7649 Mini Add-A-Battery
What does the Mini Add-A-Battery do?
Adding a second battery prevents getting stranded with a dead battery by isolating the start battery from the house loads that can quickly discharge a battery.
The Mini Add-A-Battery offers a compact, simple way to control the switching with the m-Series Dual Circuit PlusT Battery Switch and automatically share a single source of charging between two batteries with the Mini ACR Automatic Charging Relay.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
109.58 |
|
|
7650 Add-A-Battery Kit - Boxed Packaging
The 7650 Add-a-Battery simplifies switching and automates charging for a complete two battery bank management solution.
Features:
A complete two battery bank management solution
Dual Circuit Plus Battery Switch isolates engine and house circuits, and combines battery banks for emergency starting
The 120 Amp SI ACR automatic charging relay combines for charging
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
154.85 |
|
|
Mini Add-A-Battery Plus Kit - 10A
A complete small boat battery management system. Charge two batteries at or away from the dock.
For alternators up to 65A
Includes a Dual Circuit Plus™ Battery Switch 6011 a 3 Stage, 10 Amp charger with an integrated 65A Automatic Charging Relay, and a LED charger remote mSeries Dual Circuit Plus™ Battery Switch
Switches two battery banks simultaneously while maintaining battery bank isolation
Can combine two battery banks in the event of a low start battery
IP66 - protected against powerful water jets
BatteryLink® Charger
Integrated ACR provides DC charging from engine alternator
AC plug-in while at the dock
Battery temperature compensation prolongs battery life
Includes a remote LED indicator
Start isolation protects sensitive electronics from voltage sags and spikes
IP67 - protected against immersion up to 1M for 30 minutes
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
245.88 |
|
|
1494 - 360 Panel - Add-A-Battery
Part of the Blue Sea Systems Battery Management Panels. Allows easy management of the multiple battery banks.
Features:
Isolates the Start circuit from the House circuit
Allows emergency cross-connect between isolated battery banks
Protects electronics from sags and spikes caused by engine cranking
Technical Specifications:
Switch Type - M-Series battery switch
Nominal Voltage - 12V
Dimensions (H x W x D) - 7.75" x 4.88" x 3.25" (197 x 124 x 83mm)
In the Box:
1494 Panel
Instruction Manual
*Sold as an Individual
|
191.27 |
|
|
Add-A-Battery
7650
The 7650 Add-a-Battery simplifies switching and automates charging for a complete two battery bank management solution.
A complete two battery bank management solution
Dual Circuit Plus™ Battery Switch isolates engine and house circuits, and combines battery banks for emergency starting
The 120 Amp SI ACR automatic charging relay combines for charging
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
149.92 |
|
|
V10-D104K 4 Gauge Add-A-Amp Kit for 1/0 Gauge Wire
If you've already installed a 1/0 AWG amplifier wiring kit in your boat, the T-Spec V10-D108K 4 AWG wiring kit will let you add another amplifier to your system. This water-resistant kit includes everything you need to send power to your new marine amplifier.
With 4 AWG wire, you'll get long life and maximum power transfer. This kit includes two brass distribution blocks, 10' power and ground wires, a 20' remote turn-on wire, installation hardware and wire ties for installation.
Does not include RCA cables or speaker wire.
Features:
Complete marine amplifier wiring kit
Includes power wire, ground wire, turn-on wire, circuit breaker, ring terminals, wire ties, and more
Marine-compliant cable
In the Box:
4 AWG pearl White OFC copper wire - 10'
4 AWG matte Grey OFC copper wire - 10'
18 AWG Blue wire - 10'
2 Distribution blocks w/snap-on covers (One 1/0 AWG input to 4 AWG ouptut)
Ten (10) 6" Wire ties
Two (2) 4 AWG crimp-on spade terminals (non-insulated)
One (1) 18 AWG crimp-on spade terminal (insulated)
One (1) 18 AWG crimp-connector
Four (4) 12 mm Phillips-head screws
Two (2) Insulating boots for 4 AWG spade terminals
Instruction sheet
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
111.12 |
|
|
V10-D108K 8 Gauge Add-A-Amp Kit for 4 Gauge Wire
If you've already installed a 4 AWG amplifier wiring kit in your boat, the T-Spec V10-D108K 8 AWG wiring kit will let you add another amplifier to your system. This water-resistant kit includes everything you need to send power to your new marine amplifier.
With 8 AWG wire, you'll get long life and maximum power transfer. This kit includes two brass distribution blocks, 10' power and ground wires, a 20' remote turn-on wire, installation hardware, and wire ties for installation.
Does not include RCA cables or speaker wire.
Features:
Complete marine amplifier wiring kit
Includes power wire, ground wire, turn-on wire, circuit breaker, ring terminals, wire ties, and more
Marine-compliant cable
In the Box:
8 AWG pearl White OFC copper wire - 10'
8 AWG matte Grey OFC copper wire - 10'
18 AWG Blue wire - 10'
2 Distribution blocks w/snap-on covers (One 4 AWG input to 8 AWG ouptut)
Ten (10) 6in Wire ties
Four (4) 8 AWG crimp-on spade terminals (non-insulated)
One (1) 18 AWG crimp-on spade terminal (insulated)
One (1) 18 AWG crimp-connector
Four (4) 12 mm Phillips-head screws
Two (2) Insulating boots for 8 AWG spade terminals
Instruction sheet
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
71.71 |
|
|
Blue Sea Systems Products on Water or Land
In addition to the marine industry, Blue Sea Systems products can be found on emergency vehicles, RVs, agricultural equipment, off-road vehicles, and other industries where rugged, dependable products are required.
7650 Add-A-Battery
Add-a-Battery simplifies switching and automates charging for a complete two battery bank management solution. The Dual Circuit Plus™ Battery Switch isolates engine and house circuits and combines battery banks for emergency starting.
WeatherDeck 4376 Water Resistant Circuit Breaker Panel
The 4376 WeatherDeck is a water resistant circuit breaker panel with 6 positions. It is rated IP67 for temporary immersion for 30 minutes. The 4376 is designed for flybridge and open cockpit applications.
5025 ST Blade Fuse Block with Cover
The 5025 ST Blade Fuse Block with a clear, insulating cover has 6 circuits and a negative bus. The 5025 can be used for 24-circuits and has a positive distribution bus with a #10-32 stud. Models are available with or without a cover.
7748 SafetyHub 150 Fuse Block
The SafetyHub 150 is an ignition protected fuse block with screw termination. It is safe for use on gasoline powered boats, reduces wiring connections, and consolidates up to ten fused circuits. It can be used for Main or Branch DC power distribution.
|
|
|
7610
120 Amp SI-Series Automatic Charging Relay
Allows temporary isolation of house loads from engine circuit during engine cranking to protect sensitive electronics
Automatically combines battery banks during the charging cycle and isolates under discharge
12/24 Volt auto ranging voltage input
Waterproof rated IP67 - temporary immersion for 30 minutes
Ignition protected - safe for installation aboard gasoline powered boats
Remote LED output indicates relay state away from ACR
LED light indicates when batteries are combined
LED blinks in undervoltage lockout and starting lockout
Supports high-output alternators up to 120 Amperes
Included with the ADD A BATTERY Dual Circuit System
Automatically combines battery banks during the charging cycle and isolates under discharge
Ignition protected - safe for installation aboard gasoline-powered boats
Activates from any charging source - alternators, battery chargers, or solar panels
Hermetically sealed contacts / vaporproof
Side and bottom knockouts for power cable connections
Clip-on cover protects and insulates terminal connections
Tin-plated copper studs for maximum corrosion resistance
7/8" (22.22mm) stud length to accept multiple cable terminals
1/4" x 0.031" male quick connect terminals for ground and remote LED and starting interrupt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
99.76 |
|
|
1733200 Mini OLED Voltmeter - Blue
Monitors DC voltage on a bright, waterproof, daylight readable OLED screen.
Features:
Reverse polarity protected
Mounts in a common 1-1/8" (29mm) hole
Color: Blue
Meter: Voltage
Nominal Voltage: 12V DC/24V DC
Resolution: 0.1 DC
Cut Out Dimensions: 1-1/8" (28.58 mm)
Input Voltage Range: 8V-36V DC
Operating Current: 15mA
Switching Cycles: 10,000
Weight: 0.20lb (0.09 kg)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.90 |
|
|
7702
Manual Control: Yes
Coil Voltage: 24V DC
500 Ampere continuous rating for use as a remote battery switch for inboard gasoline or diesel engines, reducing long cable runs
Magnetic latch only draws current when changing state of switch, drawing no current in "ON" or "OFF" state
Silver alloy contacts provides high reliability for switching live loads
Optional manual switch provides an added level of safety allowing control with or without power, and offering lockout capability for servicing
3/8" copper studs, using Blue Sea Systems superior one piece technology, suitable for 300 Amperes continuous rating and large cable connections
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
196.63 |
|
|
7703
Manual Control: No
Coil Voltage: 24V DC
500 Ampere continuous rating for use as a remote battery switch for inboard gasoline or diesel engines, reducing long cable runs
Magnetic latch only draws current when changing state of switch, drawing no current in "ON" or "OFF" state
Silver alloy contacts provides high reliability for switching live loads
Optional manual switch provides an added level of safety allowing control with or without power, and offering lockout capability for servicing
3/8" copper studs, using Blue Sea Systems superior one piece technology, suitable for 300 Amperes continuous rating and large cable connections
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
182.11 |
|
|
Panel Plug Kit
Includes circuit breaker mounting screws, C-Series panel plug, LED plug and blank label
Designed for C-Series Circuit Breakers
Heavy 1/8" aluminum 5052 Alloy
Two-part polyurethane slate gray finish
Accepts standard Blue Sea Systems' backlight labels
Accepts standard Blue Sea Systems' "ON" indication LEDs
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3.77 |
|
|
8384
Label Backlight System
Positions - 4 Positions
Easily installed in Blue Sea Systems circuit breaker panels
Connects to 12 or 24 Volt sources via two 6" 18 AWG wire leads
Backlighting is standard on panels - No kit required
Reverse polarity protection built-in
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
9.59 |
|