|
7703
Manual Control: No
Coil Voltage: 24V DC
500 Ampere continuous rating for use as a remote battery switch for inboard gasoline or diesel engines, reducing long cable runs
Magnetic latch only draws current when changing state of switch, drawing no current in "ON" or "OFF" state
Silver alloy contacts provides high reliability for switching live loads
Optional manual switch provides an added level of safety allowing control with or without power, and offering lockout capability for servicing
3/8" copper studs, using Blue Sea Systems superior one piece technology, suitable for 300 Amperes continuous rating and large cable connections
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
182.11 |
|
|
ML-RBS Remote Battery Switch with Manual Control Auto-Release - 24V
Manual override knob provides an added level of safety allowing control with or without power and offering LOCKED OFF capability for servicing
LED output to remotely indicate switch state - requires optional LED
3/ 8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
7/ 8" (22mm) stud length accepts multiple cable terminals
Label recesses for circuit identification
Silver alloy contacts provide high reliability for switching live loads
Auto Releasing ML-Series Remote Battery Switch with SPST Switching Provides 500A switching and features of current ML Remote Battery Switches, but can be controlled with SPST or SPDT switch for applications where a normally open relay is desired
Specifications
Control Circuit Connection:Tinned Wire
Nominal Voltage:24V DC
Manual Control: Yes
Coil Function: Auto releasing
Mounting: #10
Amperage Operating Current:8mA when OFF/13mA when ON
Amperage Operating Current when changing state: <4A (40 ms)
Control Circuit Voltage: 20.2 to 32.9V DC
Continuous Rating: 500A
Intermittent Rating: 700A (5 min)
Cranking Rating: 10 sec 2500A
Cranking Rating: 1 min 1100A
Minimum Operating Temperature: -10° C
Maximum Operating Temperature: 50° C
Cable Size to Meet Ratings: 2x (4/0)
Live Current Switching: 300A @ 12V DC 10,000 Cycles
Master Control Switch Capability: Yes
Mechanical Endurance: 100,000 Cycles
Switching Cycles: 100000
Terminal Ring Diameter Clearance: 1.18" (29.97mm)
Terminal Stud Length: 0.875" (22.23mm)
Terminal Stud Size: 3/8-16 (M10)
Terminal Stud Torque: 140 in-lb (15.82 Nm)
Weight: 1.75lb (0.79 kg)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
227.06 |
|
|
ML-RBS Remote Battery Switch with Manual Control Auto-Release - 12V
Manual override knob provides an added level of safety allowing control with or without power and offering LOCKED OFF capability for servicing
LED output to remotely indicate switch state - requires optional LED
3/ 8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
7/ 8" (22mm) stud length accepts multiple cable terminals
Label recesses for circuit identification
Silver alloy contacts provide high reliability for switching live loads
Auto Releasing ML-Series Remote Battery Switch with SPST Switching Provides 500A switching and features of current ML Remote Battery Switches, but can be controlled with SPST or SPDT switch for applications where a normally open relay is desired
Specifications
Control Circuit Connection:Tinned Wire
Nominal Voltage:12V DC
Coil Function: Auto releasing
Mounting: #10
Amperage Operating Current:8mA when OFF/13mA when ON
Amperage Operating Current when changing state: <7A (40 ms)
Control Circuit Voltage: 10.1 to 16.5V DC
Continuous Rating: 500A
Intermittent Rating: 700A (5 min)
Cranking Rating: 10 sec 2500A
Cranking Rating: 1 min 1100A
Minimum Operating Temperature: -10° C
Maximum Operating Temperature: 50° C
Cable Size to Meet Ratings: 2x (4/0)
Live Current Switching: 300A @ 12V DC 10,000 Cycles
Master Control Switch Capability: Yes
Mechanical Endurance: 100,000 Cycles
Switching Cycles: 100,000
Terminal Ring Diameter Clearance: 1.18" (29.97mm)
Terminal Stud Length: 0.875" (22.23mm)
Terminal Stud Size: 3/8-16 (M10)
Terminal Stud Torque: 140 in-lb (15.82 Nm)
Weight: 1.75lb (0.79 kg)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
227.06 |
|
|
7702
Manual Control: Yes
Coil Voltage: 24V DC
500 Ampere continuous rating for use as a remote battery switch for inboard gasoline or diesel engines, reducing long cable runs
Magnetic latch only draws current when changing state of switch, drawing no current in "ON" or "OFF" state
Silver alloy contacts provides high reliability for switching live loads
Optional manual switch provides an added level of safety allowing control with or without power, and offering lockout capability for servicing
3/8" copper studs, using Blue Sea Systems superior one piece technology, suitable for 300 Amperes continuous rating and large cable connections
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
196.63 |
|
|
7717100 ML-RBS Remote Battery Switch with Manual Control Auto Release & Deutsch Connector - 24V
Features:
Includes Manual Control Auto Release
Includes Deutsch Connector
24V
Wire Harness Connections:
Red: Control +VDC, To Close
Black: Ground
Yellow: -VDC LED Output
|
231.76 |
|
|
7700
Includes ML-Series Remote Control Contura Switch 2145
Manual control switch provides an added level of safety allowing control with or without power, and offering "Locked Off" capability for servicing
500 Ampere continuous rating for engine, inverter, house loads, and emergency battery combine
Magnetic latching draws no current in "ON" or "OFF" state, only draws current when changing state of switch
Silver alloy contacts provides high reliability for switching live loads
3/8" -16 tin-plated copper studs for maximum conductivity and corrosion resistance
7/8" (22mm) stud length accepts multiple cable terminals
Label recesses for circuit identification
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
196.63 |
|
|
7713100 ML-RBS Remote Battery Switch with Manual Control Auto Release & Deutsch Connector - 12V
Features:
Includes Manual Control Auto Release
Includes Deutsch Connector
12V
Wire Harness Connections:
Red: Control +VDC, To Close
Black: Ground
Yellow: -VDC LED Output
|
231.76 |
|
|
6007
m-Series (Mini) Battery Switch Selector
Make before break contact design allows switching between battery banks without power interruption
Selector
Switches battery bank 1 or battery bank 2 or both to a single load using one switch
Features:
Ignition protected - Safe for installation aboard gasoline powered boats
Case design allows surface, front panel, or rear panel mounting
Isolating cover with snap-on sections protects rear contacts
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
7/8" (22.22mm) stud length to accept multiple cable terminals
Ideal for marine or RV applications
All non-corrosive marine grade metals
Molded in durable reinforced polycarbonate
Tactile textures indicate knob position by feel only
Label with international ON/OFF legends
Removable key or knob remains positively retained
ICON label set included for circuit identification
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
35.15 |
|
|
6010
m-Series (Mini) Battery Switch
Dual Circuit™
Switches both positive and negative lines simultaneously with one simple ON/OFF switch meeting European and metal boat requirements for a double pole switch
Switches circuits of different voltages, such as 12 volt and 24 volt, simultaneously with one simple ON/OFF switch
Features:
Ignition protected - Safe for installation aboard gasoline powered boats
Case design allows surface, front panel, or rear panel mounting
Isolating cover with snap-on sections protects rear contacts
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
7/8" (22.22mm) stud length to accept multiple cable terminals
Ideal for marine or RV applications
All non-corrosive marine grade metals
Molded in durable reinforced polycarbonate
Tactile textures indicate knob position by feel only
Label with international ON/OFF legends
Removable key or knob remains positively retained
ICON label set included for circuit identification
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.87 |
|
|
6011
m-Series (Mini) Battery Switch
Dual Circuit Plus™
Switches two battery banks simultaneously with one simple ON/OFF switch while maintaining battery bank isolation, minimizing the risk of a dead Start battery
The "Combine Batteries" function offers the ability to combine the two battery banks in the event of a low Start battery
Features:
Ignition protected - Safe for installation aboard gasoline powered boats
Case design allows surface, front panel, or rear panel mounting
Isolating cover with snap-on sections protects rear contacts
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
7/8" (22.22mm) stud length to accept multiple cable terminals
Ideal for marine or RV applications
All non-corrosive marine grade metals
Molded in durable reinforced polycarbonate
Tactile textures indicate knob position by feel only
Label with international ON/OFF legends
Removable key or knob remains positively retained
ICON label set included for circuit identification
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.87 |
|
|
6005
m-Series (Mini) Battery Switch
Single Circuit ON/OFF
Switches a single battery to a single load group
Multiple switches can be used to manage several isolated circuits including cross connecting for emergency paralleling
Features:
Ignition protected - Safe for installation aboard gasoline powered boats
Case design allows surface, front panel, or rear panel mounting
Isolating cover with snap-on sections protects rear contacts
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
7/8" (22.22mm) stud length to accept multiple cable terminals
Ideal for marine or RV applications
All non-corrosive marine grade metals
Molded in durable reinforced polycarbonate
Tactile textures indicate knob position by feel only
Label with international ON/OFF legends
Removable key or knob remains positively retained
ICON label set included for circuit identification
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
26.35 |
|
|
6006
m-Series (Mini) Battery Switch
Single Circuit ON/OFF
Switches a single battery to a single load group
Multiple switches can be used to manage several isolated circuits including cross conntecting for emergency paralleling
Ignition protected - Safe for installation aboard gasoline powered boats
Case design allows surface, front panel, or rear panel mounting
Isolating cover with snap-on sections protects rear contacts
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
7/8" (22.22mm) stud length to accept multiple cable terminals
Ideal for marine or RV applications
All non-corrosive marine grade metals
Molded in durable reinforced polycarbonate
Tactile textures indicate knob position by feel only
Label with international ON/OFF legends
Removable key or knob remains positively retained
ICON label set included for circuit identification
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
26.35 |
|
|
7623
Manual Control: Yes
Coil Voltage: 24v
Features:
Manual control switch provides an added level of safety allowing control with or without power, and offering "Locked Off" capability for servicing
Includes ML-Series Remote Control Contura Switch PN 2146
500 Ampere continuous rating
Magnetic Latch (ML)-ACR draws very low current (<10 mA to monitor terminal voltage) in the "ON" or "OFF" states, and draws moderate current for very short time when changing state
Start Isolation (SI)-Can be configured for temporary isolation of House loads from Engine circuit during engine cranking to protect sensitive electronics
Engine Isolation (EI)-Can be configured for isolation of two engines while both are running to protect engine electronics and maximize alternator output
Senses charging on two battery banks
Supports high-output alternators up to 500 Amps
LED output to remotely indicate when batteries are combined, isolated, in voltage lockout, in Start or Engine isolation
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
7/8" (22mm) stud length accepts multiple cable terminals
Label recesses for circuit protection
Silver alloy contacts provide high reliability for switching live loads
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
228.16 |
|
|
7701
Manual Control: No
Coil Voltage: 12V DC
500 Ampere continuous rating for use as a remote battery switch for inboard gasoline or diesel engines, reducing long cable runs
Magnetic latch only draws current when changing state of switch, drawing no current in "ON" or "OFF" state
Silver alloy contacts provides high reliability for switching live loads
Optional manual switch provides an added level of safety allowing control with or without power, and offering lockout capability for servicing
3/8" copper studs, using Blue Sea Systems superior one piece technology, suitable for 300 Amperes continuous rating and large cable connections
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
182.11 |
|
|
7622
Manual Control: Yes
Coil Voltage: 12v
Features:
Manual control switch provides an added level of safety allowing control with or without power, and offering "Locked Off" capability for servicing
Includes ML-Series Remote Control Contura Switch PN 2146
500 Ampere continuous rating
Magnetic Latch (ML)-ACR draws very low current (<10 mA to monitor terminal voltage) in the "ON" or "OFF" states, and draws moderate current for very short time when changing state
Start Isolation (SI)-Can be configured for temporary isolation of House loads from Engine circuit during engine cranking to protect sensitive electronics
Engine Isolation (EI)-Can be configured for isolation of two engines while both are running to protect engine electronics and maximize alternator output
Senses charging on two battery banks
Supports high-output alternators up to 500 Amps
LED output to remotely indicate when batteries are combined, isolated, in voltage lockout, in Start or Engine isolation
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
7/8" (22mm) stud length accepts multiple cable terminals
Label recesses for circuit protection
Silver alloy contacts provide high reliability for switching live loads
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
228.16 |
|