8384 Label Backlight System Positions - 4 Positions Easily installed in Blue Sea Systems circuit breaker panels Connects to 12 or 24 Volt sources via two 6" 18 AWG wire leads Backlighting is standard on panels - No kit required Reverse polarity protection built-in WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8383 Label Backlight System Positions - 13 Easily installed in Blue Sea Systems circuit breaker panels Connects to 12 or 24 Volt sources via two 6" 18 AWG wire leads Backlighting is standard on panels - No kit required Reverse polarity protection built-in WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8065 8/5/3 Position Label Backlight System Features: Easily installed in Blue Sea Systems circuit breaker panels Connects to 12 or 24 Volt sources via two 6" 18 AWG wire leads Backlighting is standard on panels - No kit required Reverse polarity protection built-in Snaps apart for 5 or 3 positions WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4 Position Switch CLB Square Provides circuit protection and switching in a compact and economical panel Available with voltmeters and ammeters Includes 4205-Square Format Label Set Specifications: Positions: 4 Nominal Voltage: 12V DC Maximum Amperage*: 40A Height: 4.75" (120.65mm) Width: 4.88" (123.95mm) Depth: 3.50" (88.9mm) Weight: 1.05lb (0.48kg) * Maximum amperage ratings are dependent on use of appropriately sized fuses and wire for a given application. Includes: (4) - 7054 - Push Button Reset Only Quick Connect Circuit Breaker - 10 Amps (4) - 7480 - Rocker Switch SPST - ON-OFF (1) - 4205 - Basic DC Label Kit - 30 Black Square Labels [LABEL] WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8069 Label Backlight System Positions - 10 Easily installed in Blue Sea Systems circuit breaker panels Connects to 12 or 24 Volt sources via two 6" 18 AWG wire leads Backlighting is standard on panels - No kit required Reverse polarity protection built-in WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8120 - 5 Position 12V Panel w/Dual USB & 12V Socket Part of the Blue Sea Systems Battery Management Panels.  Distribute current from a high amperage source to lower amperage circuits.    Features: ON-indicating LEDs Backlit label positions  All positive, negative, and grounding buses installed, fully pre-wired Specifications: Positions - Five (5) Nominal Voltage - 12V DC Maximum Amperage - 50A Circuit Breaker Type - Magnetic Hydraulic - Trip Free USB Output - 12/24V Dual USB  Socket Output - 12V Dash socket Dimensions (H x W x D) - 7.5" x 5.25" x 2.5" (191 x 133 x 64mm) In the Box: 8120 Panel Instruction Manual *Sold as an Individual 

8 Position Panel Designed for C-Series Circuit Breakers Heavy 1/8" aluminum 5052 Alloy Two-part polyurethane slate gray finish Accepts standard Blue Sea Systems' backlight labels Accepts standard Blue Sea Systems' "ON" indication LEDs WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

3 Position Panel Designed for C-Series Circuit Breakers Heavy 1/8" aluminum 5052 Alloy Two-part polyurethane slate gray finish Accepts standard Blue Sea Systems' backlight labels Accepts standard Blue Sea Systems' "ON" indication LEDs Dimensions - H 3.75" x W 5.25" or H 95.25mm x W 133.35mm Weight - .24lb or .11 kg *Sold as an Individual WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Panel Plug Kit Includes circuit breaker mounting screws, C-Series panel plug, LED plug and blank label Designed for C-Series Circuit Breakers Heavy 1/8" aluminum 5052 Alloy Two-part polyurethane slate gray finish Accepts standard Blue Sea Systems' backlight labels Accepts standard Blue Sea Systems' "ON" indication LEDs WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ST Blade Fuse Block With Cover - 6 Circuit without Negative Bus Part# 5035 Can be used for 24-hour circuits Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems' Small Format Labels for circuit identification Fuse blocks with covers include 20 write-on circuit labels Tin-plated copper buses and fuse clips Accepts ring or spade type terminals Accepts ATO® and ATC® fast acting blade fuses Fuses sold separately WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

BURKS 23286-4.97, Wet End Kits for Series GA5-1-1/4 Pump kit Only* for all GA5-1-1/4 Series (*no motor – full sized impeller – impeller trim required). Catalog # 23286-4.97 For assembly on motor with a 56J Nema frame Motor (check motor specs.). Full size impeller is 4.97 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.

Blue Sea Systems Products on Water or Land In addition to the marine industry, Blue Sea Systems products can be found on emergency vehicles, RVs, agricultural equipment, off-road vehicles, and other industries where rugged, dependable products are required. 7650 Add-A-Battery Add-a-Battery simplifies switching and automates charging for a complete two battery bank management solution.  The Dual Circuit Plus™ Battery Switch isolates engine and house circuits and combines battery banks for emergency starting. WeatherDeck 4376 Water Resistant Circuit Breaker Panel The 4376 WeatherDeck is a water resistant circuit breaker panel with 6 positions.  It is rated IP67 for temporary immersion for 30 minutes.  The 4376 is designed for flybridge and open cockpit applications. 5025 ST Blade Fuse Block with Cover The 5025 ST Blade Fuse Block with a clear, insulating cover has 6 circuits and a negative bus.  The 5025 can be used for 24-circuits and has a positive distribution bus with a #10-32 stud.  Models are available with or without a cover. 7748 SafetyHub 150 Fuse Block The SafetyHub 150 is an ignition protected fuse block with screw termination. It is safe for use on gasoline powered boats, reduces wiring connections, and consolidates up to ten fused circuits. It can be used for Main or Branch DC power distribution.

WeatherDeck™ Water Resistant Circuit Breaker Panel PN: 4374 Color: Gray Features: Rated IP67-temporary immersion for 30 minutes Designed for flybridge and open cockpit applications Independent label backlighting allows switching and dimming Compatible with all Blue Sea Systems Digital Dimmers Each panel can be mounted in four different orientations Green LEDs aid low-light readability. All labels will be lit when the panel is powered, regardless of individual switch position. Specifications: Weatherproof: Waterproof Positions: 4 Nominal Voltage: 12v / 24v DC Circuit Protection: Circuit Breaker Maximum Amperage: 15A @ 12v DC (per circuit) / 9A @ 24v DC (per circuit) Panel Cumulative Rating: 45A Backlit Label: Green LED Backlighting Amperage: 10mA/Illuminated Circuit Backlighting Voltage: 12 or 24v DC Height: 4.3" Width: 4.25" Depth: 3.5" Included: (4) 4135 Push Button Reset Only Circuit Breaker Boot - Clear (4) 4138 WeatherDeck® Toggle Switch Boot - Black (4) 4150 WeatherDeck® Toggle Switch SPST - ON-OFF (1) 4215 Waterproof DC Label Kit - 30 Black Square Labels V1 (4) 7056 Push Button Reset Only Quick Connect Circuit Breaker - 15 Amps WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

WeatherDeck™ Water Resistant Circuit Breaker Panel PN: 4376 Color: Gray Features: Rated IP67-temporary immersion for 30 minutes Designed for flybridge and open cockpit applications Independent label backlighting allows switching and dimming Compatible with all Blue Sea Systems Digital Dimmers Each panel can be mounted in four different orientations Green LEDs aid low-light readability. All labels will be lit when the panel is powered, regardless of individual switch position. Specifications: Weatherproof: Waterproof Positions: 6 Nominal Voltage: 12v / 24v DC Circuit Protection: Circuit Breaker Maximum Amperage: 15A @ 12v DC (per circuit) / 9A @ 24v DC (per circuit) Panel Cumulative Rating: 45A Backlit Label: Green LED Backlighting Amperage: 10mA/Illuminated Circuit Backlighting Voltage: 12 or 24v DC Height: 6.0" Width: 4.25" Depth: 3.5" Included: (6) 4135 Push Button Reset Only Circuit Breaker Boot - Clear (6) 4138 WeatherDeck® Toggle Switch Boot - Black (6) 4150 WeatherDeck® Toggle Switch SPST - ON-OFF (1) 4215 Waterproof DC Label Kit - 30 Black Square Labels V1 (6) 7056 Push Button Reset Only Quick Connect Circuit Breaker - 15 Amps WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8082 DC 10 Position Toggle Branch Circuit Breaker Panel  Features: All positive, negative and grounding buses installed, fully pre-wired Includes set of 30 common DC labels Label backlighting pre-installed All LEDs installed Detailed installation instructions and cutout template 8028, 8-16 Volt DC Micro Voltmeter 8041, 0-50 Amp DC Micro Ammeter Owner upgradeable to 24 Volts DC with 8243, 10-32 Volt DC Micro Voltmeter 7 15A Single Pole circuit Breakers Specifications: Positions: 10 Nominal Voltage: 12v DC Maximum Amperage: 50A Height: 11.25" Width: 5.25" Depth: 2.5" Weight: 3.35 lbs Included: (7) 7210 A-Series White Toggle Circuit Breaker - Single Pole 15A (1) 8030 Basic DC Panel Label Set - 30 Labels (1) 8028 DC Micro Voltmeter - 8 to 16V DC (Meter) (1) 8041 DC Micro Ammeter - 0 to 50A w/ Shunt (Meter) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.