|
Seaview SPOD Sail Pod Box
Max Usable Face: 13.75" x 9"
Max Cut Out Area: 12.938" x 8.125"
The Seaview Sail Pod, also known as SPOD is a instrument pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Made from UV resistant white ABS plastic and sealed with a rubber gasket. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.
Achieve the Perfect View
The SPOD has a wide mounting angle, allowing for precise viewing. Angle is set during installation.
Stainless Steel Clamps
Two high polished stainless steel clamps are used to secure your SPOD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. the SPOD fits standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the SPOD together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this SPOD is the ability to add optional side pods (part #SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
384.00 |
|
|
Seaview SPOD Sail Pod Box
Max Usable Face: 16.938" x 12.25"
Max Cut Out Area: 16" x 11.25"
The Seaview Sail Pod, also known as SPOD is a instrument pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Made from UV resistant white ABS plastic and sealed with a rubber gasket. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.
Achieve the Perfect View
The SPOD has a wide mounting angle, allowing for precise viewing. Angle is set during installation.
Stainless Steel Clamps
Two high polished stainless steel clamps are used to secure your SPOD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. the SPOD fits standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the SPOD together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this SPOD is the ability to add optional side pods (part #SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
427.20 |
|
|
Seaview DPOD Deck Power Pod Box
Max Usable Face: 13.75" x 9"
Max Cut Out Area: 12.938" x 8.125"
The DPOD is a instrument deck pod designed for power boats. Seaview took their modular mount concept and applied it to their instrument pod product line. There will be three different box sizes to fit almost any chart plotter or instrument on the market. What makes the DPOD so great is that it really appeals to fisherman because of its quick rotating base.
Rotating Base
The quick rotating base makes the DPOD a really nice choice for fisherman as it allows you to rotate the screen for better viewing on the fly, so you don't miss that catch! Simply pull the secure bolt out and rotate the DPOD left or right up to 350 degrees. To lock the anodized aluminum base back into place simply push the secure bolt back in, it's so easy you can do it with one hand!
Construction
The DPOD is made from UV resistant ABS plastic and security screws are used to hold it all together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this DPOD is the ability to add optional side pods (part #SP1BOX). Currently no other deck pod on the market has this feature. This optional add-on will fit single instruments 4.125" x 4.125" or smaller. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
369.60 |
|
|
Seaview SPOD Sail Pod Box
Max Usable Face: 14.75" x 5"
Max Cut Out Area: 13.875" x 4.125"
The Seaview Sail Pod, also known as SPOD is a instrument pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Made from UV resistant white ABS plastic and sealed with a rubber gasket. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.
Achieve the Perfect View
The SPOD has a wide mounting angle, allowing for precise viewing. Angle is set during installation.
Stainless Steel Clamps
Two high polished stainless steel clamps are used to secure your SPOD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. the SPOD fits standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the SPOD together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this SPOD is the ability to add optional side pods (part #SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
316.80 |
|
|
Seaview DPOD Deck Power Pod Box
Max Usable Face: 11.75" x 7"
Max Cut Out Area: 11" x 6.125"
The DPOD is a instrument deck pod designed for power boats. Seaview took their modular mount concept and applied it to their instrument pod product line. There will be three different box sizes to fit almost any chart plotter or instrument on the market. What makes the DPOD so great is that it really appeals to fisherman because of its quick rotating base.
Rotating Base
The quick rotating base makes the DPOD a really nice choice for fisherman as it allows you to rotate the screen for better viewing on the fly, so you don't miss that catch! Simply loosen the locking screw and rotate the DPOD left or right up to 350 degrees. To lock the anodized aluminum base back into place simply tighten the locking screw, it's so easy you can do it with one hand!
Construction
The DPOD is made from UV resistant ABS plastic and security screws are used to hold it all together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this DPOD is the ability to add optional side pods (part #SP1BOX). Currently no other deck pod on the market has this feature. This optional add-on will fit single instruments 4.125" x 4.125" or smaller. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
302.40 |
|
|
Seaview SPOD Sail Pod Box
Max Usable Face: 11.75" x 7"
Max Cut Out Area: 11" x 6.125"
The Seaview Sail Pod, also known as SPOD is a instrument pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Made from UV resistant white ABS plastic and sealed with a rubber gasket. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.
Achieve the Perfect View
The SPOD has a wide mounting angle, allowing for precise viewing. Angle is set during installation.
Stainless Steel Clamps
Two high polished stainless steel clamps are used to secure your SPOD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. the SPOD fits standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the SPOD together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this SPOD is the ability to add optional side pods (part #SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
340.80 |
|
|
Seaview SPOD Sail Pod Box
Max Usable Face: 4.625" x 4.625"
Max Cut Out Area: 4.125" x 4.125"
The Seaview Sail Pod, also known as SPOD is a instrument pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Made from UV resistant white ABS plastic and sealed with a rubber gasket. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.
Achieve the Perfect View
The SPOD has a wide mounting angle, allowing for precise viewing. Angle is set during installation.
Stainless Steel Clamps
Two high polished stainless steel clamps are used to secure your SPOD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. the SPOD fits standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the SPOD together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this SPOD is the ability to add optional side pods (part #SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
187.20 |
|
|
Seaview DPOD Deck Power Pod Box
Max Usable Face: 14.75" x 5"
Max Cut Out Area: 13.875" x 4.125"
The DPOD is a instrument deck pod designed for power boats. Seaview took their modular mount concept and applied it to their instrument pod product line. There will be three different box sizes to fit almost any chart plotter or instrument on the market. What makes the DPOD so great is that it really appeals to fisherman because of its quick rotating base.
Rotating Base
The quick rotating base makes the DPOD a really nice choice for fisherman as it allows you to rotate the screen for better viewing on the fly, so you don't miss that catch! Simply pull the secure bolt out and rotate the DPOD left or right up to 350 degrees. To lock the anodized aluminum base back into place simply push the secure bolt back in, it's so easy you can do it with one hand!
Construction
The DPOD is made from UV resistant ABS plastic and security screws are used to hold it all together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this DPOD is the ability to add optional side pods (part #SP1BOX). Currently no other deck pod on the market has this feature. This optional add-on will fit single instruments 4.125" x 4.125" or smaller. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
297.60 |
|
|
Buy a new qualifying Seaview product now until June 15th, 2020, and receive savings up to $25. Qualifying products include Modular Mounts, Mast Mounts, Camera Mounts, Sail Pods, Deck Pods, Cable Glands and additional accessories. Don't miss out!
*Offer valid now until June 15th, 2020
Specials Closeouts Remanufactured Rebates
|
|
|
Add-On Instrument Pod - Uncut
Max Usable Face: 4.625" x 4.625"
Max Cut Out Area: 4.125" x 4.125"
This Seaview Accessory Pod can be mounted to Seaview Sail Pods, Deck Pods or Rail Pods. These Accessory Pods give you the flexibility to mount additional instruments.
Made from high quality marine grade UV resistant ABS plastic and is held together with tamper resistant security screws. A water tight gasket prevents water from intruding into the pod.
Depending on the size of your Sail Pod, Deck Pod or Rail Pod one to four Accessory Pods can be mounted.
|
120.00 |
|
|
SP3S1 - Uncut Rail Pod
Max Useable Face: (13.75" x 9")
Max Cut Out Area: (12.938" x 8.125")
Seaview offers a solution to the age old problem of figuring out where to mount all your instruments on your sailboat. The Seaview Rail Pod allows you to mount smaller displays and instruments directly to the rail. Allowing you to postion the instrument where it is most optimal for you. Fits onto 1", 1-1/8" or 1-1/4" rails. A single high polished 316 stainless steel clamp is used. Cables are routed internally through the clamp and into the rail. The Rail Pod housing is made from UV protected ABS plastic housing, and sealed with a water tight rubber gasket. Tamper resistant screws are used to hold the housing together. A reinforced base made from King Starboard is added for increased strength and stability (on certain models).
Stainless Steel Clamp
A single high polished stainless steel clamp is used to secure your Rail POD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. Seaview Rail Pods fit standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the Rail Pod together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this SPOD is the ability to add optional side pods. Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the customer lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
374.40 |
|
|
Yes, it's a cliché, and if you are a sailor, you've probably heard this play-on-words before. While none of us want to admit that we are growing older, I can attest that 99.9 percent of my sailing friends are part of the baby boom generation. Generationally, baby boomers are people born between 1946 – 1964. My husband Bob and I, who have been sailing for more than 30 years, are part of this demographic.
The Ancient Mariner
When global mariner Reese Palley, at age 82, wrote Call of the Ancient Mariner: Reese Palley's Guide to a Long Sailing Life he proclaimed that "sailing is the natural sport for the old, the best way to lengthen and improve your life, and the perfect antidote to a society that conspires to narrow senior horizons". His audience? The nearly one million recreational sailors over 60.
Although Palley is no longer with us (died at 93 years old in 2015), he was the perfect guy to speak about sailing and old age. His two circumnavigations around the earth happened in his 60th and 70th years. He was committed to helping sailors of all types successfully and safely sail into their golden years. He said sailing, as a natural sport, can improve the health of people in their later chapters of life.
Making your voyage a little more 'physically and mentally' user-friendly.
Is it a little tougher to 'tote that barge/lift that bail' and be the grinder in trimming the sails? It's a given that as our bodies age, our muscles and joints become less supple.
The flaw in the older mariner's psyche is the belief that we can do anything with Herculean strength. Bite the bullet. Admit that the aging process has produced some limitations. Stop being Captain Purist. Accept help. If you can't be the fastest at the winch anymore, install a powerwinch. Don't risk a back or shoulder injury.
Have navigation equipment that is easy on the eyes. This a nice way of saying to have GPS Plotters, Fish Finders, Weather Fax, and radar equipment with a text enlargement feature. Be sure that your night vision equipment has the ability for text enlargement. You can't call for help from your Marine radio if you can't read the channel numbers beyond 16.
Have several extra pairs of reading glasses and flashlights in every combing box, swag/gear bag, and bedside bunk compartment, both above deck and below. Have readers duck taped near your gauges. Keep those glasses handy for squinting at shore power pedestals.
We were caught up in two situations where the captain left the boat in daylight and returned in the dark. The hatch was locked with a combination lock and couldn't be read and opened without reading glasses and flashlight. Argh!
Have a pair of reading glasses attached to your First Aid Kit and emergency equipment. Include flares and fire extinguishers. You have to be able to read the dosage on your medication bottles, and possibly a crew member's, too. In life rafts that are prepacked, include a pair of your prescription glasses (and pet food if traveling with your pet).
Back to Basics vs. Safety Common Sense
While we focus here on sailors over 60, we think about going back to the ways of ancient mariners who navigated by the wind and the stars. A good friend learned to sail four decades ago by the seat of his pants. Friends sent him out in a small sailboat, at night, with no landmarks visible, and only the wind in the sails as his teacher.
Let's not be stupid. When it comes to safety, communication and navigation equipment are a must. The bulk of our sailing experience has been on the Great Lakes, and charter trips to the BVIs and St. Maarten. On one such adventure on Lake Michigan, a group of boats sailed together from Chicago to a harbor in Indiana - a four to six-hour trip. This was years ago before personal cellphones. When one of our solo skippers started out late and didn't arrive when she should have, we went into search mode. The marine police and Coast Guard were called.
She arrived safely after sailing into the wrong harbor, then correcting the error, and eventually finding us. She also had no working radio and no GPS or Loran. The stupidity award was given, and we pitched in and bought her a radio.
Enjoy the Ride
A successful voyage means getting from point A to point B in the safest possible way, all the while taking your time and enjoying the ride. No stress, no yelling, just you, the wind, and the waves.
Here's to hitting the high seas at any age. Wind in your hair- the hair that you have left – with crew you love. Fair winds. Smooth sailing.
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3Happycampers.com
|
|
|
SP2S1 - Uncut Rail Pod
Max Useable Face: (11.75" x 7")
Max Cut Out Area: (11" x 6.125")
Seaview offers a solution to the age old problem of figuring out where to mount all your instruments on your sailboat. The Seaview Rail Pod allows you to mount smaller displays and instruments directly to the rail. Allowing you to postion the instrument where it is most optimal for you. Fits onto 1", 1-1/8" or 1-1/4" rails. A single high polished 316 stainless steel clamp is used. Cables are routed internally through the clamp and into the rail. The Rail Pod housing is made from UV protected ABS plastic housing, and sealed with a water tight rubber gasket. Tamper resistant screws are used to hold the housing together. A reinforced base made from King Starboard is added for increased strength and stability (on certain models).
Stainless Steel Clamp
A single high polished stainless steel clamp is used to secure your Rail POD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. Seaview Rail Pods fit standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the Rail Pod together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this SPOD is the ability to add optional side pods. Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the customer lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
331.20 |
|
|
SP5S1 - Uncut Rail Pod
Max Useable Face: (14.75" x 5")
Max Cut Out Area: (13.875" x 4.125")
Seaview offers a solution to the age old problem of figuring out where to mount all your instruments on your sailboat. The Seaview Rail Pod allows you to mount smaller displays and instruments directly to the rail. Allowing you to postion the instrument where it is most optimal for you. Fits onto 1", 1-1/8" or 1-1/4" rails. A single high polished 316 stainless steel clamp is used. Cables are routed internally through the clamp and into the rail. The Rail Pod housing is made from UV protected ABS plastic housing, and sealed with a water tight rubber gasket. Tamper resistant screws are used to hold the housing together. A reinforced base made from King Starboard is added for increased strength and stability (on certain models).
Stainless Steel Clamp
A single high polished stainless steel clamp is used to secure your Rail POD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. Seaview Rail Pods fit standard 9.5", 12" and non standard guard rails.
Security screws are used to hold the Rail Pod together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in.
Optional Accessory Pod
One of the unique abilities with this SPOD is the ability to add optional side pods. Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the customer lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.
|
307.20 |
|
|
Scanpod Helm Pod 4 Instrument Uncut - Usable Face 4.3" x 19.7" - White
Specifications:
4 Instrument
Color: White
Depth: 3.2"
Usable Face: 4.3H" x 19.75W"
Scanpod Range
The exciting range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot control onto yachts and powerboats
Features:
Simplified range - easy product selection
Manufactured from acrylic caped ABS plastic - tough, durable and UV stable
Tamper proof stainless fastenings - secure install without self-tapping into plastic
Innovative watertight seal system - full instrument protection supplied uncut to fit any display
|
336.83 |
|