|
Groco 155-6110-12 Macerator Pump Submersible
Groco- Macerator Pump Only, In-Tank Submersible 12VDC for 10” Tank Depth
More Info: New Installations Require Groco MP-HARDWARE Kit. Photo Shows The Pump Installed With The Hardware Kit.
|
876.96 |
|
|
Groco 155-6113-12 Macerator Pump Submersible
Groco- Macerator Pump Only, In-Tank Submersible 12VDC for 13” Tank Depth
More Info: New Installations Require Groco MP-HARDWARE Kit. Photo Shows The Pump Installed With The Hardware Kit.
|
876.96 |
|
|
NXL-M4 Full Range 4 Channel IPX5 Marine Grade Amplifier - 150 x 4W @ 4-Ohm
Designed for intense sessions that keep the party boat rocking all night long; the NXL-M4 is DS18’s high-quality, powerful amplifier for the wave runner looking for a big sound with a small footprint!
As a Class D Digital amplifier, the NXL-M4 uses a direct insert speaker and power terminals significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power.
The NXL-M4 handles 150W x 4CH @ 4 Ohms; 230W x 4CH @ 2 Ohms; and 440W x 2CH @ 4 Ohms Bridge of RMS Power and 1800W Peak Power.
Get clean, well-defined sound for with enough features (Fully Variable Bass Boost, Low Pass Filter, and High Pass Filter) to tune your music perfectly for optimal audio enjoyment! This full-range amplifier handles all speakers insanely well and has the features to make sure they play the way you want them to!
This amplifier is tough enough to stand up to the worst the waves throw at you! All controls are guarded by high-strength front covers that guarantee impenetrable defense against the elements; coated 4-layer PCB helps prevent corrosion caused by salt water; and Voltage, Thermal, and Short Circuit Protection for easy monitoring of your power levels.
Order the NXL-M4 for insane power out on the water!
Features:
Hardware resistant to corrosion and UV Protection
Coated 4 Layers PCB to prevent corrosion
IPX5 Water Resistance Grade
High Level Input For Radio Use
Front cover to keep the controls safe to the elements
LED Clip Indicator to easier adjustment
Stable and Reliable Class D Circuit Design
Sound Quality Verification Using AP Instruments
Direct Insert Power and Speaker Terminals
Short Circuit, Thermal, and Voltage Protection
Technical Specifications:
Number of Channels - 4
Frequency Response - 20Hz - 20KHz
2 Ohm RMS Power Per Channel - 4 x 230W
4 Ohm RMS Power Per Channel - 4 x 150W
4 Ohm RMS Power Bridge Channel - 2 x 440W
Signal-to-Noise Ratio - >90dB
Product Dimensions: (L x W x H) - 9.6" x 4.5" x 1.7"
*Sold as an Individual
|
479.94 |
|
|
13mm High-Load Trolley with 2X M4 Tapped Holes
This trolley features recirculating ball bearings housed in strong, lightweight, corrosion-resistant aluminum for dependable, low-friction linear travel. Use for moving loads and equipment, hoisting, and moving stage equipment, and architectural solutions.
Features:
High-load trolley with two M4-tapped holes on top
Torlon® ball bearings handle high loads, reducing friction so the trolley moves smoothly along the rail
Retaining clips keep ball bearings captive when the trolleys are removed for maintenance
Specifications:
Length (mm): 56 mm
Length (in): 2-3/16 in
Width (mm): 40 mm
Width (in): 1-9/16 in
Weight (g): 57 g
Maximum Rated Load (kN): 1.4 kN
Height (mm): 19 mm
Height (in): 3/4 in
Weight (oz): 2.01 oz
Breaking Load (kN): 6.7 kN
|
87.73 |
|
|
Threaded Blue Insert for 61121 & 61122
Threaded blue insert for single outlet, single flush & Double outlet, 2-way flush.
|
21.49 |
|
|
7611 DC BatteryLink™ Automatic Charging Relay - 120 Amp w/Auxiliary Battery Charging
Features:
120 Amp continuous rating
12/24V DC auto ranging voltage input
Senses charging on two battery banks
Side and bottom knockouts for cable connections
Clip-on cover insulates terminal connections
7/8" (22 mm) stud length to accept multiple cable terminals
Integrated LED indicates ACR status
1/4" x .032" male quick connect terminals for ground and optional features
Specifications:
Intermittent Rating: 5 min.: 210 Amps
Continuous Rating: 120 Amps
Nominal Voltage: 12/24 Volts DC
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
99.76 |
|
|
Newbury, Massachusetts, April 15th, 2010: Technology changes rapidly and as a company building WiFi equipment, Island Consulting strives to offer the best. Since the beginning, Island Consulting has continuously made improvements to The Wirie, a long range WiFi solution for boats and RVs. The most recent development in creating a better product involves a high-end marine grade WiFi antenna. To achieve this goal, Island Consulting partnered with the well-known US antenna manufacturer, L-com.
L-com, a leading antenna manufacturer in the wireless connectivity business for over 27 years, agreed to produce a marine grade antenna exclusively for The Wirie. Designed to stringent specifications, the new Wirie antenna is an 8dBi omni-directional high performance marine antenna that features sealed collinear brass elements inside a durable UV-stable white fiberglass radome. The sealed end cap ensures no water entry and drain holes in the base help prevent moisture build-up inside the antenna.
The collaboration between Island Consulting and L-com offers the consumer an economical alternative to other true marine grade WiFi devices currently on the market. “We believe our partnership with L-com has allowed us to turn The Wirie into the most durable and best long range WiFi solution available for boats and RVs”, states Mark Kilty from Island Consulting. According to Karl Blomgren, L-Com's Product Manager, “L-Com is always interested in working with customers, like Island Consulting, to optimize our antennas for their applications to support new product enhancements.” Additional information about The Wirie's new antenna can be viewed at www.thewirie.com/antennadetails.html.
For $250, The Wirie enhances the customers' ability to connect to the internet from the comfort of his/her own boat or RV. The Wirie continues to offer many unique features: flexible stainless steel mounting bracket, easy to install and use software, comprehensive user manual, powerful 1000mW WiFi adapter, IP67 waterproof box, and superior customer support. The Wirie is easy to upgrade as technology continues to advance. In addition to the new antenna, the warranty of The Wirie has been extended to 1 year. The 10-day money back guarantee is still in place.
Through the joint effort between Island Consulting and L-com, The Wirie is a truly marine grade WiFi solution at an affordable price.
For more information, please visit www.thewirie.com.
About The Wirie:
Island Consulting located in Newbury, Massachusetts, USA, manufactures and distributes The Wirie. The Wirie was invented in the Caribbean in April 2009 to provide a cost-effective, user-friendly, long range WiFi solution for boats and RVs. It was quickly expanded to a U.S. operation to allow a larger distribution. Island Consulting is committed to continuous improvements and to making sure every customer is extremely satisfied. Website: www.thewirie.com
About L-com:
Founded in 1982, L-com Global Connectivity is a privately held corporation in Massachusetts, USA, dedicated to the design and production of a wide range of interconnect products for the electronics and data communication industries. L-com places primary product emphasis on copper and fiber cable assemblies, wireless antennas and amplifiers and accessories for modular, coaxial and computer networking applications. In June 2007, L-com acquired HyperLink Technologies of Boca Raton, Florida, USA. Website: www.L-com.com
Contact:
Liesbet Collaert
liesbet@thewirie.com
http://www.thewirie.com
The Wirie can now be found at CLR Marine.
http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION
http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION%2FAntennas
http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION%2FMobile%20Broadband
http://www.clrmarine.com/m4_view_item.html?m4:item=0Wirie
|
|
|
By now, the skipper in your life has probably dropped a few hints about holiday gifts. Was it the note left on the coffee pot about Articulated ABS Barrel Hinge foldable Aluminum Tubing? At first glance, one would have thought that the message was a reminder about being out of coffee filters. Then it comes back to you that there was a conversation in the car about GemLock Assembled Folding Struts.
Foldable aluminum tubing is one of the hottest trends in stainless steel hardware for marine canvas and solar panel frames. The tubing offers versatility in styling, high quality, and ease of use. https://www.clrmarine.com/462m4/manufacturers/g/gemini-marine.html
Back to your captain's holiday gift list. Was there a subtle hint, while you both were swimming off the boat, and your skipper showed concern that the transom ladder seemed a little short by a few steps? She would find getting out of the lake sooooo much easier if she didn't have to reach her foot up so far to the lowest step. She had also mentioned a discussion with other boat captains about the Extend Your Step, an easy-to-use boat boarding ladder extension. Several of her sailing buddies already have them and raved about the ease and portability.
.
All of the products mentioned above are available at CLR Marine.com. How confident are the folks at CLR Marine about the Extend Your Step regarding ease in boarding and extending the ladder length? This product reflects the confidence and integrity of CLR Marine's owner, Chuck Reed. He invented the Extend Your Step! When shopping for the extending ladder, be sure to check out the Extend Your Step Three – a longer and non-moving version of the Extend Your Step! https://www.clrmarine.com/Boat-Boarding-Ladder-Extension
It's possibly time for your captain to give the best seat in the house – on your boat- an upgrade. There is no better place to watch the glint of the sun on the waves than in a stern perch seat. Stern rail seats are now available for older model boats, even pre-1993, and the seats are removable. https://www.clrmarine.com/sternperch-seats.html
Stocking Stuffers
Floatable key rings. If you are old enough to have keys, then you are old enough to lose keys. House keys, boat keys, car keys – when these fall into the drink and aren't retrievable, your boat outing takes a turn for the worse. Car key fobs are expensive to replace. Neon colored strong straps or carabiner clips offer added security against key loss.
DryCASE Smartphone Case
The DryCASE waterproof cell phone case keeps your electronics protected, whether surfing, paddle boarding, or canoeing. The DryCASE uses vacuum seal technology to ensure a watertight seal every time. Best of all, you'll still be able to use your touch screen to text or make calls, and the crystal clear covering makes taking pictures a cinch. When you purchase the DryCASE you will also receive a small hand pump, neoprene armband, and a lanyard $36.92. https://www.clrmarine.com/m4/45443—drycase-smartphone-case.html
RAM Mount AQUA BOX Medium
RAM AQUA BOX® cases provide sealed enclosure and protection for your handheld devices. The clear, touch through screen allows you to view your electronics and use their function keys while in place. There is even a place for a small lock to serve as a theft deterrent. The AMPS hole pattern on the back of the box allows this enclosure to be attached to many RAM mounting bases and kits. Ideally suited to Motorcycles and ATV's, the AQUA BOX keeps your portable devices safe, dry, and accessible $36.49.
Scotty 130 Paddle Safety Leash
Paddles, rods, nets, gaffs, and many other items can be secured while in use with the Scotty Safety Leash. Features include two extra strong Scotty 1009 swivel snaps; super-strong Flex Coil cord allows for maximum unrestricted movement and stretches to approx. 6'. Unit Includes two figure eight securing straps $11.99. https://www.clrmarine.com/m4/37811--scotty-130-paddle-safety-leash-black.html
Gifts under $30.00
Don't forget about covers for your water toys.
The Dallas Manufacturing Co – Pedal Boat Cover will keep your pedal boat dry, dirt free, and protected from the sun when not in use. Features include 150 Denier Silver Polyester, fits both 3 and 5 Person Pedal Boats and is backed by a one year warranty $13.19. https://www.clrmarine.com/m4/36879—dallas-manufacturing-co-pedal-boat-polyester-cover.html
Mustang Lil' Legends 70 Youth Vest - Fluorescent Yellow-Green/Gray
Have guests arrived on your boat with a small young family member who needs a life vest? The Mustang Lil's Legends is a quality youth vest, and it never hurts to have a spare on board. It fits a child 50-90 pounds $21.59.
https://www.clrmarine.com/m4/49897—mustang-lil-legends-70-youth-vest-50-90lbs-fluorescent-yellow-green-gray.html
Be good—Santa's watching. Stay healthy. Fair Winds. Smooth sailing.
To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com
______________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com
|
|
|
RAM® X-Grip® Phone Mount for Wheelchair Armrests
This kit includes a B size RAM® diamond ball base with a universal hardware pack that accommodates the armrest on most major wheelchair brands, including Invacare, Permobil, and Quickie. With the included long double socket arm, double ball adapter, and medium double socket arm, connect and adjust the RAM® X-Grip® universal phone holder to your ideal position. The popular, spring-loaded RAM® X-Grip® provides a perfect fit for a wide variety of phones.
Specifications:
Cradle Dimensions:
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
Included Mounting Hardware:
(QTY. 2) #10-32 x 1/2" Machine Screw
(QTY. 2) #10-32 T-Nut (3/8" x 5/8")
(QTY. 2) #10-32 T-Nut (1/2" x 1")
(QTY. 2) M4 x 12mm Machine Screw
(QTY. 2) M4 x 20mm Machine Screw
(QTY. 2) M4 Stainless Steel Washer
(QTY. 2) M4 Nylock Nut
Material: Powder Coated Marine Grade Aluminum
Ball Size: B Size 1" Rubber Ball
|
86.65 |
|
|
RAM® X-Grip® Phone Mount for Wheelchair Seat Tracks
This kit includes a B size RAM® diamond ball base with a universal hardware pack that accommodates the seat track on most major wheelchair brands, including Invacare, Permobil, and Quickie. With the included short single socket arm, 9" pipe extension, and medium double socket arm, connect and adjust the RAM® X-Grip® universal phone holder to your ideal position. The popular, spring-loaded RAM® X-Grip® provides a perfect fit for a wide variety of phones.
Specifications:
Cradle Dimensions:
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
Included Mounting Hardware:
(QTY. 2) #10-32 x 1/2" Machine Screw
(QTY. 2) #10-32 T-Nut (3/8" x 5/8")
(QTY. 2) #10-32 T-Nut (1/2" x 1")
(QTY. 2) M4 x 12mm Machine Screw
(QTY. 2) M4 x 20mm Machine Screw
(QTY. 2) M4 Stainless Steel Washer
(QTY. 2) M4 Nylock Nut
Material: Powder Coated Marine Grade Aluminum
Ball Size: B Size 1" Rubber Ball
|
72.00 |
|
|
RAM® Universal Wheelchair Ball Base
This RAM® ball base features a universal hardware pack that accommodates the arm and seat tracks on most major wheelchair brands including Invacare, Permobil, and Quickie, as well as any other universal mounting point. Pair with a variety of compatible RAM® arms and extensions to build a custom mount to meet your specific needs.
Specifications:
Package Includes:
(QTY. 2) #10-32 x 1/2" Machine Screw
(QTY. 2) #10-32 T-Nut (3/8" x 5/8")
(QTY. 2) #10-32 T-Nut (1/2" x 1")
(QTY. 2) M4 x 12mm Machine Screw
(QTY. 2) M4 x 20mm Machine Screw
(QTY. 2) M4 Stainless Steel Washer
(QTY. 2) M4 Nylock Nut
Material: Powder Coated Marine Grade Aluminum
Ball Size: C Size 1.5" Rubber Ball
Weight: 0.3 lbs.
|
22.93 |
|
|
RAM® X-Grip®Wheelchair Seat Track Mount for 9"-10" Tablets
This kit includes a C size RAM® diamond ball base with a universal hardware pack that accommodates the seat track on most major wheelchair brands, including Invacare, Permobil, and Quickie. With the included short single socket arm, pipe extension, and double socket arm, connect the RAM® X-Grip® universal holder for 9”-10” tablets. The spring-loaded RAM® X-Grip® provides a perfect fit for your tablet and can be easily adjusted to the ideal position.
Specifications:
Cradle Dimensions:
Minimum Width = 6.25"
Maximum Width = 8.1"
Depth = 0.875"
Maximum Length (using additional supports) = 10.25"
Included Mounting Hardware:
(QTY. 2) #10-32 x 1/2" Machine Screw
(QTY. 2) #10-32 T-Nut (3/8" x 5/8")
(QTY. 2) #10-32 T-Nut (1/2" x 1")
(QTY. 2) M4 x 12mm Machine Screw
(QTY. 2) M4 x 20mm Machine Screw
(QTY. 2) M4 Stainless Steel Washer
(QTY. 2) M4 Nylock Nut
Material: Powder Coated Marine Grade Aluminum & High Strength Composite
|
90.00 |
|
|
5/16" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - Black
Trident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber.
Features:
Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone
Also provides excellent bend-ability
NMMA Type Accepted & CE certified
Application:
Marine Fuel Hose (distribution, return, vent and transfer)
For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
Construction:
Tube: Nylon Internal Barrier, NBR
Cover: NBR/PVC Blend
Reinforcement: Polyester 2 spiral
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Length: 50 ft. (15 m) Boxed
Specifications:
Inner Diameter: (inch) 5/16" / (mm) 7.92
Outer Diameter: (inch) 0.611 / (mm) 15.5
Burst Pressure: (psi) 400 / (mpa) 2.76
Working Pressure: (psi) 100 / (mpa) 0.69
Bend Radius: (inch) 1.75" / (mm) 44.5
Weight: (lb/100 ft.) 13.3 / (kg/m) 0.198
Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10)
*The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10
|
127.31 |
|
|
5/16" A1-15 Reel Low Permeation Fuel Line Hose - Black - Sold by the Foot
Trident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation and a unique "Barrier Liner" on the inside surface of the tube, so the fuel is not in direct contact with rubber.
Features:
Sold by the foot
Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone
Also provides excellent bend-ability
NMMA Type Accepted & CE certified
Application:
Marine Fuel Hose for distribution, return, vent and transfer
For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
Construction:
Tube: Nylon Internal Barrier, NBR
Cover: NBR/PVC Blend
Reinforcement: Polyester 2 spiral
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Length: 250 ft. reel (sold by the foot)
Specifications:
Inner Diameter: (inch) 5/16" / (mm) 7.92
Outer Diameter: (inch) 0.611 / (mm) 15.5
Burst Pressure: (psi) 400 / (mpa) 2.76
Working Pressure: (psi) 100 / (mpa) 0.69
Bend Radius: (inch) 1.75" / (mm) 44.5
Weight: (lb/100 ft.) 13.3 / (kg/m) 0.198
Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10)
*The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10
|
4.08 |
|
|
5/16" Low Permeation Type A1-15 Fuel Line Hose - Black - Sold by the Foot
Trident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber.
Features:
Sold by the foot
Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone
Also provides excellent bend-ability
NMMA Type Accepted & CE certified
Applications:
Marine Fuel Hose (distribution, return, vent and transfer)
For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
Construction:
Tube: Nylon Internal Barrier, NBR
Cover: NBR/PVC Blend
Reinforcement: Polyester 2 spiral
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Specifications:
Inner Diameter: (inch) 5/16" / (mm) 7.92
Outer Diameter: (inch) 0.611 / (mm) 15.5
Burst Pressure: (psi) 400 / (mpa) 2.76
Working Pressure: (psi) 100 / (mpa) 0.69
Bend Radius: (inch) 1.75" / (mm) 44.5
Weight: (lb/100 ft.) 13.3 / (kg/m) 0.198
Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10)
*The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10
|
4.48 |
|