|
Threaded Blue Insert for 61121 & 61122
Threaded blue insert for single outlet, single flush & Double outlet, 2-way flush.
|
21.49 |
|
|
Polarity Reversing Switch Kit f/Ultra Ballast Pump F4B-11
|
39.53 |
|
|
Threaded Discharge Port - 1"
This discharge port is made for Johnson Pump heavy-duty bilge pumps (1600/2200 GPH).
Features:
1"
Discharge Port
|
6.79 |
|
|
Aqua Void Automatic 500 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
High-flow impeller design
Quick-change motor connection
Switchless automatic bilge pump with low-amp resistance monitoring
Durable thermoplastic housing design commonality with removable motor cartridge
Smaller profile than pumps with switches
Straight or 90-degree dura port discharge ports with an included check valve
Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings
Clip-in basket
Benefits:
Heightened efficiency and an increased flow rate
Enjoy quick and hassle-free cartridge motor changes or capacity upgrades
Automatically monitors the presence of water through low-amp draw impeller spin
The common body allows interchangeable motor cartridge replacement to the same or different size
For tighter fit in smaller spaces
Allow multi-directional hose routing, eliminate stress cracking without disengaging hoses or removing pumps, and reduce cycling from water backflow
Corrosion-resistant and extended life
Competitive Advantages:
The most efficient and highest flow in the GPH capacity category
Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires
100 days of service before critical battery draw down*
Automatically monitors the presence of water through low-amp draw impeller spin
Ease of installation & maintenance
Specifications:
Pump Size: 500 GPH
Capacity Straight (12V): 600 GPH (38 I/min)
Voltage: 12V
Amp: 2.7A
Fuse: 3.5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TINNED
Weight: 11.2 oz (0.32 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)
|
79.37 |
|
|
Aqua Void Automatic 800 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
High-flow impeller design
Quick-change motor connection
Switchless automatic bilge pump with low-amp resistance monitoring
Durable thermoplastic housing design commonality with removable motor cartridge
Smaller profile than pumps with switches
Straight or 90-degree dura port discharge ports with an included check valve
Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings
Clip-in basket
Benefits:
Heightened efficiency and an increased flow rate
Enjoy quick and hassle-free cartridge motor changes or capacity upgrades
Automatically monitors the presence of water through low-amp draw impeller spin
The common body allows interchangeable motor cartridge replacement to the same or different size
For tighter fit in smaller spaces
Allow multi-directional hose routing, eliminate stress cracking without disengaging hoses or removing pumps, and reduce cycling from water backflow
Corrosion-resistant and extended life
Competitive Advantages:
The most efficient and highest flow in the GPH capacity category
Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires
100 days of service before critical battery draw down*
Automatically monitors the presence of water through low-amp draw impeller spin
Ease of installation & maintenance
Specifications:
Pump Size: 800 GPH
Capacity Straight (12V): 795 GPH (50 I/min)
Voltage: 12V
Amp: 3.7A
Fuse: 5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TINNED
Weight: 12.6 oz (0.36 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)
|
90.00 |
|
|
Single Threaded Gate Eye for 1/8" Wire
A single eye is used on one end of the gate area and threaded into eye nut.
|
26.46 |
|
|
Single Threaded Gate Eye for 3/16" Wire
A single eye is used on one end of the gate area and threaded into eye nut.
|
27.89 |
|
|
Threaded Discharge Port - 1-1/8"
Features:
1-1/8"
Threaded Discharge Port
|
6.46 |
|
|
Twin Port Pumps
750 GPH
Offers the convenience of using only one intake for both the livewell and raw water wash down pump.
The 3/4" tapered inlet connects directly to the sea cock and the upper outlet port provides a continuous flow of water through the 3/4" discharge to the livewell while the lower outlet port connects to the wash down pump through either a 1/2" or 3/4" ports.
High pressure inlet seal easily handles the higher pressures created by high speed pickups commonly used.
|
45.92 |
|
|
Twin Port Pumps
1250 GPH
Offers the convenience of using only one intake for both the livewell and raw water wash down pump.
The 3/4" tapered inlet connects directly to the sea cock and the upper outlet port provides a continuous flow of water through the 1-1/8" discharge to livewell. Does not include Dura-Port. while the lower outlet port connects to the wash down pump through either a 1/2" or 3/4" ports.
High pressure inlet seal easily handles the higher pressures created by high speed pickups commonly used.
|
51.35 |
|
|
PRO SERIES 1600 GPH Livewell/Baitwell
24V
Features heavy duty bronze bottom inlet, 1600 GPH of pumping power, dual port capability, mega torque motor, double ball bearings, quiet running design, 1" NPT female intake. Built for the serious fisherman!
Capacity straight(13.6 V):1600GPH
Capacity 3 ft (0.9 m) head(13.6 V):1550GPH
Amperage:3.5A
Fuze Size:6A
Connection:1-1/3" and 1-1/4"
|
165.92 |
|
|
Motor Group 12V for Silent Electric Toilets
Johnson Pump's 12V motor group (silent electric).
|
188.80 |
|
|
1000 GPH Multi Port Shower Sump Pump 12V with Switch
This compact shower sump system is designed to meet the higher demands of today's boating industry where more equipment is used. This also includes the freshwater system onboard and involves showers, dish-washing machines, galley sinks, etc. The shower sump turns on/off automatically using our Ultima switch technology and has multiple inlet ports for handling wastewater from more than one tapping point. The check valve on the outlet stops water from flowing back into the tank. The tank has a tight-fitting lid to minimize splashing and odors. To further aid in cleaning, the system includes an easily removable mesh filter.
*CE-Approved
Features:
Includes the L650 Duo pump and a mesh filter for easy cleaning
Multiple inlet ports
Handles wastewater from more than one tapping point
Tight-fitting lid to minimize splashing and odors
Check the valve on the outlet
Capacity 1.0 m head (13.6 V/27 V): 53 l/min - 844 GPH
Capacity straight (13.6 V/27 V):61 l/min - 972 GPH
Amperage: 3.4 A
Fuse Size: 5 A
Pump Body: Thermoplastic
Shaft Seal: Lip seal
Voltage: 12 V DC
Intake Hoses: 1x3/4", 1x3/4" or 1x1"
Discharge Hose: 3/4"
|
112.60 |
|
|
Aqua Jet Wash Down Kit 5.2
New 19 l/min (5.2 GPM) wash down kit conveniently includes a high capacity Aqua Jet WD 5.2, 5 bar (70 psi), PUMProtector inlet strainer, spray nozzle, bulk head fitting with valve, and 7.5 meters (25') of coiled wash down hose all in one package. Aqua Jet wash down pump kit makes it easy to add a wash down pump to any boat.
CE-Approved
Feaures:
Whisper quiet operation
Five-chamber construction
Smooth flowing
Self-priming
Easy, low cost maintenance
Quick-connect hose
Long service life
Connection: 1/2" NPT / hose 3/4". 3/4" GHT, Hose 3/4" GHT
Bulkhead fitting - Inlet 3/4" hose, outlet 3/4" GHT
|
272.59 |
|
|
Oil Change Bucket Kit - With Gear Pump
Gear Pump Oil Change Bucket 12V
Features:
Reliable, well designed & proven gear pump technology
For marine or industrial applications
Portable & convenient
High temperature resistant dipstick tube
Heavy-duty alligator clips easily clamp directly onto battery
Use the easy pour spout to empty used oil in recycling container
12 Volt
1 Year Warranty
Kit includes:
Pail
Sealed Lid
Pump Assembly
Dipstick tube
Heavy Duty Alligator Clips
Easy Pour Spout
|
192.59 |
|