RAM® X-Grip®Wheelchair Seat Track Mount for 9"-10" Tablets This kit includes a C size RAM® diamond ball base with a universal hardware pack that accommodates the seat track on most major wheelchair brands, including Invacare, Permobil, and Quickie. With the included short single socket arm, pipe extension, and double socket arm, connect the RAM® X-Grip® universal holder for 9”-10” tablets. The spring-loaded RAM® X-Grip® provides a perfect fit for your tablet and can be easily adjusted to the ideal position. Specifications: Cradle Dimensions: Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Maximum Length (using additional supports) = 10.25" Included Mounting Hardware: (QTY. 2) #10-32 x 1/2" Machine Screw (QTY. 2) #10-32 T-Nut (3/8" x 5/8") (QTY. 2) #10-32 T-Nut (1/2" x 1") (QTY. 2) M4 x 12mm Machine Screw (QTY. 2) M4 x 20mm Machine Screw (QTY. 2) M4 Stainless Steel Washer (QTY. 2) M4 Nylock Nut Material: Powder Coated Marine Grade Aluminum & High Strength Composite

RAM® X-Grip®Wheelchair Leg Rail Mount for 7"-8" Tablets Designed for use with the seat and leg rails on popular wheelchair brands, this kit includes a small RAM® Tough-Claw™ clamp base connected to an 18” RAM® Flex-Rod™ and medium double socket arm. The RAM® Tough-Claw™ can be clamped to 0.625" - 1.5" diameter rails. Attach the included RAM® X-Grip® tablet mount for use with 7”-8” tablets. The spring-loaded RAM® X-Grip®provides a perfect fit for your tablet and can be easily adjusted to the ideal position.  Specifications: Cradle Dimensions: Minimum Width = 2.5" (Minimum Height = 7") Maximum Width = 5.75" (Minimum Height = 4") Depth = 0.875" Overall Length: 26" Ball Size: B Size 1" Rubber Ball Material: Powder Coated Marine Grade Aluminum and High-Strength Composite

RAM® X-Grip® Phone Mount for Wheelchair Seat Tracks This kit includes a B size RAM® diamond ball base with a universal hardware pack that accommodates the seat track on most major wheelchair brands, including Invacare, Permobil, and Quickie. With the included short single socket arm, 9" pipe extension, and medium double socket arm, connect and adjust the RAM® X-Grip® universal phone holder to your ideal position. The popular, spring-loaded RAM® X-Grip® provides a perfect fit for a wide variety of phones.  Specifications: Cradle Dimensions: Minimum Width = 1.875" (Minimum Height = 4.25") Maximum Width = 3.25" (Minimum Height = 2.25") Depth = 0.875" Included Mounting Hardware: (QTY. 2) #10-32 x 1/2" Machine Screw (QTY. 2) #10-32 T-Nut (3/8" x 5/8") (QTY. 2) #10-32 T-Nut (1/2" x 1") (QTY. 2) M4 x 12mm Machine Screw (QTY. 2) M4 x 20mm Machine Screw (QTY. 2) M4 Stainless Steel Washer (QTY. 2) M4 Nylock Nut Material: Powder Coated Marine Grade Aluminum Ball Size: B Size 1" Rubber Ball

X-Grip® Dashboard Mount with Backing Plate for 9"-10" Tablets The RAM® X-Grip® universal holder for 9"-10" tablets features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Included are easy-access grip knobs located on the back of the holder for quick release of your tablet. No matter what double socket arm and mounting base you pair the RAM® X-Grip® with, RAM® ball and socket technology allow for near-infinite adjustability to achieve the ideal viewing angle while also extending the life of your tablet by providing shock and vibration damping. The RAM-101U-B consists of a short double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allow for almost infinite adjustment and perfect viewing angles. Features: Spring-loaded 'X' design with rubber caps sports great holding power without obstructing your tablet; fits most 9 in. -10 in. tablets Drill-down mounting solution; choose either round plate featuring the AMPS hole pattern for attachment to compatible device holders 2.10 in. x 2.60 in. steel backing plate attaches to a variety of RAM® Mounts ball bases Made of high-strength composite and steel components for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Holder Dimensions (inch): Max Height: 10.25" (using optional supports), Width Range: 6.25" - 8.1", and Max Depth: .875" Socket to Socket Length (inch): 2.5” Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Plate Size (inch): 2.5" Diameter Ball Size (inch): C size (1.5”) Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs. Materials: Marine-grade aluminum and high-strength composite Weight: 2.42 lb. Compatible Devices: Amazon: Fire HD 10 Apple: iPad (1st Generation), iPad (3rd Generation), iPad (4th Generation), iPad (5th Generation), iPad (6th Generation), iPad (7th Generation), iPad (8th Generation), iPad (9th Generation), iPad (10th Generation), iPad 2, iPad 9.7 (2017), iPad 9.7 (2018), iPad Air, iPad Air 2, iPad Air 3, iPad Air 4, iPad Air 5, iPad Pro 9.7 (1st Generation), iPad Pro 10.5 (2nd Generation), iPad Pro 11", iPad Pro 11" (2020), iPad Pro 11" (2021), and iPad Pro 11" (2022) ASUS: MeMO Pad FHD 10, Transformer Pad, ZenPad 10, ZenPad 3S 10, and ZenPad Z10 Dell: Venue 10 7000, Venue 11 Pro, and Venue 11 Pro 7000 Google: Nexus 10 and Pixel C HP: ElitePad 900, ElitePad 900 G1, Pro 610, and Pro Slate 10.1 Huawei: MediaPad M2 10.0, MediaPad M3 Lite 10.0, and MediaPad T3 10 Lenovo: Miix 3, Tab P12 Pro, S6000, Tab 2 A10-70, Tab 4 10, Tab 4 10 Plus, Tab A10, Tab3 10 Business, ThinkPad 10, ThinkPad Tablet 2, Yoga Book, Yoga Tab 3 10, Yoga Tab 3 Pro, Yoga Tablet 10, Yoga Tablet 10 HD+, and Yoga Tablet 2 (10 inches) LG: G Pad 10.1, G Pad II 10.1, G Pad X 10.1, and G Pad X II 10.1 Microsoft: Surface 2, Surface Pro, Surface Pro 2, Surface Go, and Surface Go 2 Nokia: T21 Samsung: Galaxy Book 10.6, Galaxy Tab 10.1, Galaxy Tab 2 10.1, Galaxy Tab 3 10.1, Galaxy Tab 4 10.1, Galaxy Tab A 9.7, Galaxy Tab A 10.5, Galaxy Tab A8 10.5, Galaxy Tab Active Pro, Galaxy Tab Active4 Pro, Galaxy Tab Pro 10.1, Galaxy Tab S 10.5, Galaxy Tab S2 9.7, Galaxy Tab S3 9.7, Galaxy Tab S4 10.5, Galaxy Tab S5e, Galaxy Tab S6, Galaxy Tab S7, Galaxy Tab S7 FE, Galaxy Tab S7 Plus, Galaxy Tab S8, and Galaxy Tab S8 Plus Sony: Vaio Tap 11, Xperia Tablet S, and Xperia Tablet Z Vankyo: MatrixPad Z4 10" Zebra: ET50 10" and ET55 10"

RAM® X-Grip® Phone Mount for Wheelchair Armrests This kit includes a B size RAM® diamond ball base with a universal hardware pack that accommodates the armrest on most major wheelchair brands, including Invacare, Permobil, and Quickie. With the included long double socket arm, double ball adapter, and medium double socket arm, connect and adjust the RAM® X-Grip® universal phone holder to your ideal position. The popular, spring-loaded RAM® X-Grip® provides a perfect fit for a wide variety of phones.  Specifications: Cradle Dimensions: Minimum Width = 1.875" (Minimum Height = 4.25") Maximum Width = 3.25" (Minimum Height = 2.25") Depth = 0.875" Included Mounting Hardware: (QTY. 2) #10-32 x 1/2" Machine Screw (QTY. 2) #10-32 T-Nut (3/8" x 5/8") (QTY. 2) #10-32 T-Nut (1/2" x 1") (QTY. 2) M4 x 12mm Machine Screw (QTY. 2) M4 x 20mm Machine Screw (QTY. 2) M4 Stainless Steel Washer (QTY. 2) M4 Nylock Nut Material: Powder Coated Marine Grade Aluminum Ball Size: B Size 1" Rubber Ball

RAM Flat Surface Mount® with Long Double Socket Arm & Universal X-Grip® III Holder For Large Tablets The RAM-B-101-C-UN9U consists of (2 QTY) 2.5" diameter round bases with the universal AMPS hole pattern, LONG double socket arm and universal X-Grip® III clamping cradle for 10" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip® III clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® III clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip® III. X-Grip® III Cradle Dimensions: Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Maximum Length (using additional supports) = 10.25" X-Grip® III Cradle Features: 1. Spring loaded cradle expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of cradle allows for attachment to many 1" socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the cradle for quick release of your tablet 6. Multiple mounting access points on the back of the cradle 7. Additional support keeper at the bottom of the cradle 8. Full access to all ports 9. Lifetime warranty Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite

X-Grip® Phone Mount with Track Ball™ Base - Long This RAM® Track Mount for standard-size phones (RAM-HOL-UN7B-C-354-TRA1U) is made up of a B-size 1" ball molded to a high-strength composite base, a rubber friction washer, and a stainless steel T-bolt for sliding into any third-party track system, or the RAM® Tough-Track™ line of tracks. Simply insert or slide the Track Ball™ into your track and twist the ball clockwise to tighten it in place. Twist counterclockwise to loosen or adjust the ball. Included in this kit are a B-size long-length socket arm and a RAM® X-Grip® for standard-size phones with or without a case. This track mount is ideal for mounting devices to the Jeep JL and Gladiator dashboard track mounts (RAM-DT-204-TRACK-A12U) and the new Ford Bronco dashboard track mount (RAM-DT-207-TRACK-EXA-29BU). Features: 1" B-size RAM® ball with adjustable T-bolt designed for track mounting systems, including the RAM® Tough-Track™ and other third-party track systems Features a rubber friction washer and a stainless steel T-bolt; simply insert it into your track and twist the ball clockwise to tighten Includes a B-size long-length socket arm and a standard-size RAM® X-Grip® phone holder Spring-loaded X-Grip® holds standard-size phones and includes an optional device tether for peace of mind during rugged use Backed by a lifetime warranty Specifications: Hardware Included: (1) Optional tether, and (1) glue tube for rubber caps Holder Dimensions (inch): Width range: 1.875" - 3.25" / Max depth: .875" T Bolt Dimensions: .48” x .95” Socket to Socket Length (inch): 5.31” Ball Size (inch): B size (1”) Weight Capacity: The standard use is 2 lbs. and the heavy-duty use is 1 lb. Materials: Marine-grade aluminum and high-strength composite, stainless steel Weight: 0.82 lb. Compatible Devices: Apple: iPhone 6s, iPhone 7, iPhone 8, iPhone SE, iPhone X, iPhone Xs, iPhone Xr, iPhone 11, iPhone 11 Pro, iPhone 12, iPhone 12 mini, iPhone 12 Pro, iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 14, and iPhone 14 Pro Blackberry: DTEK 50, DTEK 60, and KEYone Garmin: Approach G8, Edge 1030, and Edge Explore 1000 Google: Pixel, Pixel XL, Pixel 2, Pixel 3, Pixel 3a, Pixel 4, Pixel 4 XL, Pixel 4a, Pixel 5, Pixel 6, Pixel 6 Pro, and Pixel 7 HTC: U11 and U11 life Huawei: Mate 20 Pro and P30 Pro LG: Aristo, Aristo 2, Exalt LTE, G5, G5 Silver, G6, G6+, G7 ThinQ, G8 ThinQ, Grace LTE, K20, K20 Plus, K20 V, K3, K3 2017, K8 2017, Phoenix 3, Q6, Rebel 2 LTE, Rebel 3 LTE, Risio 2, Tribute Dynasty, Tribute HD, V30, V35 ThinQ, V40 ThinQ, Wine LTE, and Zone 4 Motorola: moto e4, moto g5s plus, moto g6, moto g7 power, moto X2, moto X4, and razr Nokia: 1, 2, 3, 5, 6, 8, 9 PureView, 216, 230, 150 Dual SIM, 3310 Dual SIM, 7 plus, 8 Sirocco, and 8110 4G OnePlus: 6T, 7, 7T, 7T Pro, and 7 Pro Samsung: Galaxy A3, Galaxy A3 (2016), Galaxy A3 (2017), Galaxy A5, Galaxy A5 (2016), Galaxy A5 (2017), Galaxy A6, Galaxy A6+, Galaxy A7 (2016), Galaxy A8+, Galaxy A8 (2018), Galaxy A8+ (2018), Galaxy A10, Galaxy A10e, Galaxy A10s, Galaxy A11, Galaxy A20, Galaxy A20e, Galaxy A30, Galaxy A40, Galaxy A50, Galaxy A50s, Galaxy AMP 2, Galaxy AMP Prime, Galaxy AMP Prime 2, Galaxy C5, Galaxy E5, Galaxy Express 3, Galaxy Express Prime 2, Galaxy Grand Max, Galaxy J1, Galaxy J1 (2016), Galaxy J2, Galaxy J2 (2016), Galaxy J2 (2017), Galaxy J3 (2016), Galaxy J3 (2017) International, Galaxy J3 Emerge, Galaxy J3 Prime, Galaxy J3 V, Galaxy J5, Galaxy J5 (2016), Galaxy J5 (2017), Galaxy J7 (2016), Galaxy J7 (2017), Galaxy J7 Perx, Galaxy J7 Prime, Galaxy J7 Prime 2, Galaxy Luna, Galaxy Note 8, Galaxy Note Fan Edition, Galaxy Note 10, Galaxy Note20, Galaxy On NXT, Galaxy On5, Galaxy On7 Prime, Galaxy On8, Galaxy S5, Galaxy S5 Neo, Galaxy S6, Galaxy S6 Active, Galaxy S6 Edge, Galaxy S6 Edge+, Galaxy S7, Galaxy S7 Active, Galaxy S7 Edge, Galaxy S8+, Galaxy S9, Galaxy S9+, Galaxy S10, Galaxy S10+, Galaxy S10e, Galaxy S20, Galaxy S20+, Galaxy S20 FE 5G, Galaxy S20 Ultra 5G, Galaxy S22 5G, Galaxy S22+ 5G, Galaxy S23, Galaxy V Plus, Galaxy XCover 3, Galaxy XCover 4, Galaxy XCover 5, Galaxy Z Fold2, Galaxy Z Fold3, W2017, Z1, Z2, Z3, and Z4 Sony: Xperia L1, Xperia X, Xperia X Compact, Xperia X Performance, Xperia XA, Xperia XA1, Xperia XA1 Plus, Xperia XA2, Xperia XZ, Xperia XZ1, Xperia XZ1 Compact, Xperia XZ2, Xperia XZ2 Compact, Xperia XZ3, Xperia XZs, Xperia Z3, Xperia Z3+, Xperia Z5, Xperia Z5 Compact Xiaomi: Mi 9, Mi 9 Explorer, Mi Mix 2S, and Mi Mix 3 ZTE: Axon 9 Pro, Axon 10 Pro

Finger-Grip™ Holder with Track Ball™ Base - Long This RAM® Track Mount for handheld radios (RAM-HOL-UN4-C-354-TRA1U) is made up of a B-size 1" ball molded to a high-strength composite base, a rubber friction washer, and a stainless steel T-bolt for sliding into any third-party track system or the RAM® Tough-Track™ line of tracks. Simply insert or slide the Track Ball™ into your track and twist the ball clockwise to tighten it in place. Twist counterclockwise to loosen or adjust the ball. Included in this kit are a B-size long-length socket arm and a RAM® Finger-Grip™ for handheld radios featuring adjustable side arms for a form fit depending on your specific radio. This track mount is ideal for mounting 2-way radios to the Jeep JL and Gladiator dashboard track mounts (RAM-DT-204-TRACK-A12U) and the new Ford Bronco dashboard track mount (RAM-DT-207-TRACK-EXA-29BU). Features: 1" B-size RAM® ball with adjustable T-bolt designed for track mounting systems, including the RAM® Tough-Track™ and other third-party track systems Features a rubber friction washer and a stainless steel T-bolt; simply insert it into your track and twist the ball clockwise to tighten Includes a B-size long-length socket arm and a RAM® Finger-Grip™ handheld radio holder with adjustable side arms for a variety of different radios RAM® Finger-Grip™ holds a variety of different 2-way radios and includes three sets of four rubber-coated fingers for different-sized devices, as well as top and bottom optional device supports Backed by a lifetime warranty Specifications: Hardware Included: Assembly hardware Holder Dimensions (inch): Height Range: 7.25" max (using optional supports) / Width Range: 1.25" - 3.5" / Max Depth: 1.5" T Bolt Dimensions: .48” x .95” Socket to Socket Length (inch): 5.31” Ball Size (inch): B size (1”) Weight Capacity: The standard use is 2 lbs. and the heavy-duty use is 1 lb. Materials: Marine-grade aluminum and high-strength composite Weight: 1.17 lb. Compatible Devices: 2-Way: Radios Amcrest: ATR-22 Brother: RuggedJet Go 2035B and RuggedJet Go 2055WB BaoFeng: BF-888S, BF-F8+, BF-F8HP, DMR-6X2, MURS-V1, UV-5R, UV-82C, UV-82HP, UV-82L, and UV-82X Garmin: Alpha 100, Astro 900 System, Delta Sport XC, Delta Upland XC, Delta XC, eTrex Touch 25, eTrex Touch 35, eTrex Touch 35t, GPSMAP 66 Series, inReach Explorer+, inReach SE+, Montana 700, Montana 700i, Montana 750, Montana 750i, PRO Control, and Sport PRO Honeywell: CT40 Midland: 75-822, EX37VP, HH50B, LXT118, LXT118VP, LXT500VP3, LXT535VP3, LXT560VP3, LXT600VP3, LXT630VP3, LXT633VP3, X-Talker T10, X-Talker T20, X-Talker T31VP, X-Talker T35VP, X-Talker T51VP3, X-Talker T55VP3, X-Talker T61VP3, X-Talker T65VP3, X-Talker T71VP3, X-Talker T75VP3, and X-Talker T77VP5 Spot: X TYT: DM-UVF10, MD-2017, MD-280, MD-380, MD-380G, MD-390, MD-446, Q1, TC-2000A, TC-3000A, TC-3000B, TC-5000, TC-7000, TC-8000, TH-446, TH-6200, TH-F5, TH-F7, TH-UV6R, TH-UV818, TH-UV8R, TH-UVF1, TH-UVF8D, TH-UVF9, TH-UVF9D, TK-918, TK-928, TK-938, TYT-777, TYT-800, W700, X1, and X2 Venterior: VT-FF001/E, VT-FF002, VT-FF003, VT-FF04 Wouxun: KG-659E, KG-699E, KG-703E, KG-819, KG-828, KG-829, KG-928, KG-939, KG-958, KG-959, KG-968, KG-988, KG-D2000, KG-D900, KG-D901, KG-UV66, KG-UV8D, KG-UV9D, KG-UV9K, KG-UVA1, KG-V55, and KG-WT18 Yaesu: FT-25R, FT-270R, FT2DR, FT-4VR, FT-4XR, FT-60R, FT-65R, FT-70DR, FT-70DR, and VX-6R Zebra: TC21, TC26, and EC30

RAM X-Grip II Part #: RAM-HOL-UN8BU Sometimes, its all about the design. If you are looking for a compact mount for your tablet without that cookie cutter shape, you've found it. The RAM X-Grip II has a clean and clever four leg design that sports great holding power without hiding your tablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip II is the tablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your tablet and become the most useful accessory in your vehicle. The RAM-HOL-UN8BU consists of a spring loaded holder and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN8BU expands and contracts for perfect fit of most 7" tablets. Compatible Devices: Amazon Kindle Amazon Kindle Fire Archos 7 Asus EEE Pad Memo Barnes & Noble NOOKcolor BlackBerry PlayBook Dell Streak 7 HTC Flyer Panasonic Toughpad JT-B1 Samsung Galaxy Tab (7" version) All devices that maintain the following dimensions below: Holder Dimensions: Minimum Width = 2.25" (Devices 2.25" in width must be a minimum of 7" in height to fit) Maximum Width = 5.75" Depth = 0.875" Features: Spring loaded holder expands and contracts for perfect fit of your tablet Rubber coated tips will hold your tablet firm and stable Versatility of holder allows for attachment to many RAM-to-RAM ball and 1" socket mounts Socket technology allows for multiple adjustment angles and articulation of your tablet Easy access grip knobs, located on the back of the holder for quick release of your tablet Material: High Strength Composite with Rubber Tips Ball Size: 1" Rubber Ball "B" Size

RAM X-Grip® Phone Mount with Track Ball™Base The RAP-HOL-UN7B-354-TRA1 consists of a Track Ball™ base, composite double socket arm and universal spring-loaded X-Grip® cradle for cell phones. This design features a 1" diameter rubber ball and socket system with adjustment points at both ends of the socket arm. The spring-loaded X-Grip® cradle expands and contracts, allowing for a seamless fit with your phone. The kit is the perfect complement to the modern and sleek interiors of today's vehicles, and is compatible with virtually any track system including the RAM Tough-Track™. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions Minimum Width = 1.875" (Minimum Height = 4.25") Maximum Width = 3.25" (Minimum Height = 2.25") Depth = 0.875"  Specs & Features Features: 1. Rustproof 2. High strength composite and stainless steel construction 3. Spring loaded cradle expands and contracts for perfect fit of your device 4. Rubber coated tips will hold device firm and stable 5. Socket technology allows for multiple adjustment angles and articulation of device 6. Includes Tether for open cockpit and extreme environments 7. Lifetime warranty 8. Made in U.S.A. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in a poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.

X-Grip® Phone Mount with Low-Profile Medium Tough-Claw™ The RAM® X-Grip® Phone Mount with Low-Profile RAM® Tough-Claw™ consists of the medium RAM® Tough-Claw™ base and the universal RAM® X-Grip® phone holder, connected by the RAM® Pin-Lock™ adapter. The RAM® X-Grip® features an ‘X’ design that expands and contracts to secure your phone and includes a device tether recommended for outdoor applications. With the RAM® Tough-Claw™ base connected, easily attach the RAM® X-Grip® to round, square, and odd-shaped rails and bars ranging from 1 in. to 1.6 in. in outer diameter. This kit is compatible with handheld devices that fit the dimensions listed below. It is important to verify the dimensions of the handheld device with its case, sleeve, or skin when determining the overall size. Features: Low-profile phone mounts clamp to the handlebar with the turn of a single knob Includes a medium version of the RAM® Tough-Claw™ base, designed to clamp to round, square, and odd-shaped rails and bars ranging from 1" to 1.6" in outer diameter; rubber pads provide stable gripping and protection of the mounting surface Spring-loaded 'X' design for phones with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use; Check the compatibility section below to see if your phone will fit Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: (1) Optional Tether and (1) Glue Tube for Rubber Caps Hole Dimensions: Width Range: 1.85" - 3.25", Depth Range: .875" max Clamp Range (inch): 1" - 1.6" diameter Materials: High-strength composite and stainless steel Weight: 0.48 lb. Compatible Devices: Apple: iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xs Max, iPhone 11 Pro Max, iPhone 12 Pro Max, iPhone 13 Pro Max, iPhone 14 Plus, and iPhone 14 Pro Max Blackberry: DTEK 50, DTEK 60, and KEYone Garmin: Approach G8, Edge 1030, and Edge Explore 1000 Google: Pixel, Pixel XL, Pixel 2, Pixel 3, Pixel 3a, Pixel 4, Pixel 4 XL, Pixel 4a, Pixel 5, Pixel 6, Pixel 6 Pro, and Pixel 7 HTC: U11 and U11 life Huawei: Mate 20 Pro and P30 Pro LG: Aristo, Aristo 2, Exalt LTE, G5, G5 Silver, G6, G6+, G7 ThinQ, G8 ThinQ, Grace LTE, K20, K20 Plus, K20 V, K3, K3 2017, K8 2017, Phoenix 3, Q6, Rebel 2 LTE, Rebel 3 LTE, Risio 2, Tribute Dynasty, Tribute HD, V30, V35 ThinQ, V40 ThinQ, Wine LTE, and Zone 4 Motorola: moto e4, moto g5s plus, moto g6, moto g7 power, moto X2, moto X4, and razr Nokia: 1, 2, 3, 5, 6, 8, 9 PureView, 216, 230, 150 Dual SIM, 3310 Dual SIM, 7 plus, 8 Sirocco, and 8110 4G OnePlus: 6T, 7, 7T, 7T Pro, and 7 Pro Rand: McNally Road Explorer 5 and McNally TND 540 Razer: Phone 2 Samsung: Galaxy A3, Galaxy A3 (2016), Galaxy A3 (2017), Galaxy A5, Galaxy A5 (2016), Galaxy A5 (2017), Galaxy A6, Galaxy A6+, Galaxy A7 (2016), Galaxy A8+, Galaxy A8 (2018), Galaxy A8+ (2018), Galaxy A10, Galaxy A10e, Galaxy A10s, Galaxy A11, Galaxy A20, Galaxy A20e, Galaxy A30, Galaxy A40, Galaxy A50, Galaxy A50s, Galaxy AMP 2, Galaxy AMP Prime, Galaxy AMP Prime 2, Galaxy C5, Galaxy E5, Galaxy Express 3, Galaxy Express Prime 2, Galaxy Grand Max, Galaxy J1, Galaxy J1 (2016), Galaxy J2, Galaxy J2 (2016), Galaxy J2 (2017), Galaxy J3 (2016), Galaxy J3 (2017) International, Galaxy J3 Emerge, Galaxy J3 Prime, Galaxy J3 V, Galaxy J5, Galaxy J5 (2016), Galaxy J5 (2017), Galaxy J7 (2016), Galaxy J7 (2017), Galaxy J7 Perx, Galaxy J7 Prime, Galaxy J7 Prime 2, Galaxy Luna, Galaxy Note 8, Galaxy Note Fan Edition, Galaxy Note 10, Galaxy Note20, Galaxy On NXT, Galaxy On5, Galaxy On7 Prime, Galaxy On8, Galaxy S5, Galaxy S5 Neo, Galaxy S6, Galaxy S6 Active, Galaxy S6 Edge, Galaxy S6 Edge+, Galaxy S7, Galaxy S7 Active, Galaxy S7 Edge, Galaxy S8+, Galaxy S9, Galaxy S9+, Galaxy S10, Galaxy S10+, Galaxy S10e, Galaxy S20, Galaxy S20+, Galaxy S20 FE 5G, Galaxy S20 Ultra 5G, Galaxy S22 5G, Galaxy S22+ 5G, Galaxy S23, Galaxy V Plus, Galaxy XCover 3, Galaxy XCover 4, Galaxy XCover 5, Galaxy Z Fold2, Galaxy Z Fold3, W2017, Z1, Z2, Z3, and Z4 Sony: Xperia L1, Xperia X, Xperia X Compact, Xperia X Performance, Xperia XA, Xperia XA1, Xperia XA1 Plus, Xperia XA2, Xperia XZ, Xperia XZ1, Xperia XZ1 Compact, Xperia XZ2, Xperia XZ2 Compact, Xperia XZ3, Xperia XZs, Xperia Z3, Xperia Z3+, Xperia Z5, and Xperia Z5 Compact Xiaomi: Mi 9, Mi 9 Explorer, Mi Mix 2S, and Mi Mix 3 ZTE: Axon 9 Pro, Axon 10 Pro

X-Grip® Phone Mount with Motorcycle Brake/Clutch Reservoir Base The RAM-B-174-A-UN7 consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, short length double socket arm and universal X-Grip® cell phone cradle. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows you to move the X-Grip® mount to your optimum viewing position. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.  Specifications: Cradle Dimensions: Minimum Width = 1.875" (Minimum Height = 4.25") Maximum Width = 3.25" (Minimum Height = 2.25") Depth = 0.875" Includes: (QTY. 1), Optional Tether Included Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: B Size 1" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. To see if the RAM-B-174-UN7 will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58". RAM highly recommends using the provided Tether for all open cockpit applications while using this product. Weight: 0.88 lbs.

X-Grip® Large Phone Mount with Brake/Clutch Reservoir Base The RAM-B-174-UN10 consists of hardware for mounting to either brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, double socket arm and universal X-Grip® large phone/phablet holder. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows you to move the X-Grip® mount to your optimum viewing position. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.  Specifications: Includes: (QTY. 1), Optional Tether Included Cradle Dimensions: Minimum Width = 1.75" (Minimum Height = 5.5") Maximum Width = 4.5" (Minimum Height = 3.25") Depth = 0.875" Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: B Size 1" Rubber Ball Note: Part number reflects product packaged in a retail box for store shelf display. To see if the RAM-B-174-UN7 will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58". RAM highly recommends using the provided Tether for all open cockpit applications while using this product. Weight: 1.0 lbs.

X-Grip® Large Phone Mount with Low-Profile Medium Tough-Claw™ The RAM® X-Grip® Large Phone Mount with Low-Profile RAM® Tough-Claw™ consists of the medium RAM® Tough-Claw™ base and the universal large RAM® X-Grip® phone holder, connected by the RAM® Pin-Lock™ adapter. The large RAM® X-Grip® features an ‘X’ design that expands and contracts to secure your phone and includes a device tether recommended for outdoor applications. With the RAM® Tough-Claw™ base connected, easily attach the RAM® X-Grip® to round, square, and odd-shaped rails and bars ranging from 1" to 1.6" in outer diameter. This kit is compatible with handheld devices that fit the dimensions listed below. It is important to verify the dimensions of your handheld device with its case, sleeve, or skin when determining the overall size. Features: Low-profile phone mount clamps to your handlebar with the turn of a single knob includes a medium version of the RAM® Tough-Claw™ base, designed to clamp to round, square, and odd-shaped rails and bars ranging from 1" to 1.6" in outer diameter; rubber pads provide stable gripping and protection of the mounting surface The spring-loaded 'X' design for large phones with rubber caps sports great holding power without hiding your phone; Includes optional device tether for peace of mind during rugged use; Check the compatibility section below to see if your phone will fit Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: (1) Optional Tether and (1) Glue Tube for Rubber Caps Hole Dimensions: Width Range: 1.75" - 4.5", Depth Range: .875" max Clamp Range (inch): 1" - 1.6" diameter Materials: High-strength composite and stainless steel Weight: 0.78 lb. Compatible Devices: Apple: iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xs Max, iPhone 11 Pro Max, iPhone 12 Pro Max, iPhone 13 Pro Max, iPhone 14 Plus, and iPhone 14 Pro Max Blackberry: Evolve X Blackview: BV9900 and BV9900 Pro Cat: S42, S62, and S62 Pro Garmin: Drive 50, Drive 51 LM, Drive 52, Drive 61 LM, DriveSmart 51 LMT-S, DriveSmart 61 LMT-S, DriveTrack 71, Nuvi 2788LM, RV 660LMT, and RV 770 LMT-S Google: Pixel 2 XL, Pixel 3 XL, Pixel 3a XL, and Pixel 7 Pro HTC: Bolt and U Ultra Huawei: Mate 20 X Kyocera: DuraSport 5G LG: Fiesta 2 LTE, Fiesta LTE, G8S ThinQ, Harmony, Stylo 2 V, Stylo 3, Stylo 3 Plus Titan, Stylo 4, V20, V50 ThinQ, X charge, and X venture Magellan: TR5 and TR7 Motorola: moto e4 plus, moto g4, moto z2, moto z2 play, and moto z3 Rand: McNally Road Explorer 5 and McNally TND 540 Razer: Phone 2 Samsung: Galaxy A7, Galaxy A7 (2017), Galaxy A7 (2018), Galaxy A8, Galaxy A8 (2016), Galaxy A9 (2016), Galaxy A9 Pro (2016), Galaxy A9 (2018), Galaxy A70, Galaxy A80, Galaxy A90 5G, Galaxy C7, Galaxy C7 Pro, Galaxy C9 Pro, Galaxy E7, Galaxy Grand Neo Plus, Galaxy J7, Galaxy J7 Max, Galaxy J7 V, Galaxy Note 5, Galaxy Note 10 Plus, Galaxy Note20 Ultra, Galaxy On7, Galaxy S10 5G, Galaxy S8, Galaxy S8 Active, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 Ultra 5G, Galaxy S23+, and Galaxy S23 Ultra Sonim: RS60 Sony: Xperia C4, Xperia L2, Xperia XA Ultra, Xperia XA1 Ultra, Xperia XA2 Ultra, and Xperia XZ Premium

X-Grip® Phone Mount with 9mm Angled Bolt Head Adapter  The RAP-B-272-A-UN7U consists of an angled base with 9mm hole, short composite double socket arm and universal spring loaded RAM® X-Grip® cradle for cell phones. The angled base is often used on motorcycles, attaching to the mirror frame, the main brand of bike for this part is BMW. The included RAM® X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded RAM® X-Grip®cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM® X-Grip® is the cell phone cradle evolved. The RAM® X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.  Cradle Dimensions: Minimum Width = 1.875" (Minimum Height = 4.25") Maximum Width = 3.25" (Minimum Height = 2.25") Depth = 0.875" Material: High Strength Composite, Marine Grade Stainless Steel Components, and Powder Coated Marine Grade Aluminum Ball Size: B Size 1" Rubber Ball Note: Part number reflects product packaged in clear clam shell for store shelf display. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.