|
13mm High-Load Trolley with 2X M4 Tapped Holes
This trolley features recirculating ball bearings housed in strong, lightweight, corrosion-resistant aluminum for dependable, low-friction linear travel. Use for moving loads and equipment, hoisting, and moving stage equipment, and architectural solutions.
Features:
High-load trolley with two M4-tapped holes on top
Torlon® ball bearings handle high loads, reducing friction so the trolley moves smoothly along the rail
Retaining clips keep ball bearings captive when the trolleys are removed for maintenance
Specifications:
Length (mm): 56 mm
Length (in): 2-3/16 in
Width (mm): 40 mm
Width (in): 1-9/16 in
Weight (g): 57 g
Maximum Rated Load (kN): 1.4 kN
Height (mm): 19 mm
Height (in): 3/4 in
Weight (oz): 2.01 oz
Breaking Load (kN): 6.7 kN
|
87.73 |
|
|
8mm High Resistance "D" Shackle
Forged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter. High-Resistance (HR) shackles are forged in 17-4PH stainless steel to handle high loads. They have an "HR" imprint for easy identification.
Specifications:
Shackle pin: 8mm / 5/16in
Weight: 56.5g / 2oz
Maximum working load: 2330kg / 5130lb
Breaking load: 4650kg / 10260lb
|
60.04 |
|
|
Series 50 High Load Block - Single - Universal Head
Ideal for high load applications. Wear resistant sheave material, in lightweight, self lubricating polymer, is suitable for use with rope or wire.Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required.
Features:
Exceptionally high working loads
Lightweight
Cheek cut-outs for easy bearing maintenance
Suitable for both rope or wire
Captive Lock™ universal head
Slotted pin shackle eliminates fouled lines
Applications:
Mainsheet
Spinnaker sheets
Halyards and other primary applications on boats up to 10M(33')
Materials:
Nylatron® sheave
Grade 316 stainless steel load strap and head fitting
Impact and U.V. resistant, fiber reinforced Nylon cheeks
Specifications:
Sheave Ø: 50mm(2")
Max. Rope Ø: 12mm(1/2")
Max. Cable Ø:5mm(3/16")
Max. Pin Ø: 5mm(3/16")
M.W.L.: 800kg(1,760lbs)
B. L.: 1,500kg(3,310lbs)
Weight: 117g(4.1oz)
|
49.79 |
|
|
Series 40 High Load Block - Single
Features:
Exceptionally high working loads
Lightweight
Cheek cut-outs for easy bearing maintenance
Suitable for both rope or wire
Captive Lock™ universal head
Slotted pin shackle eliminates fouled lines
Ideal for high load applications. Wear resistant sheave material, in lightweight, self lubricating polymer, is suitable for use with rope or wire.Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required
Applications:
Halyards
Backstays
Vang
Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8m (26ft)
Materials:
Nylatron® sheave
Grade 316 stainless steel load strap and head fitting
Impact and U.V. resistant, fiber reinforced Nylon cheeks
|
40.46 |
|
|
Series 30 High Load Exit Box for Single Rope or Wire
Plain bearing sheaves are ideal for halyards and other applications where high static loads are likely to be encountered
Applications:
Ideal applications where lines (rope or wire) need to be led through decks, bulkheads or spars minimizing friction and chafing
Materials:
Nylatron®l sheave
Grade 316 Stainless Steel cheeks
Specifications:
Sheave Ø: 30.0mm(1-3/16")
Max. Rope Ø:8.0mm(5/16")
Max. Cable Ø: 4.0mm(5/32")
B.L.: 800kg(1,760lbs)
|
23.11 |
|
|
Series 40 High Load Exit Box for Single Rope or Wire
Plain bearing sheaves are ideal for halyards and other applications where high static loads are likely to be encountered
Applications:
Ideal applications where lines (rope or wire) need to be led through decks, bulkheads or spars minimizing friction and chafing
Materials:
Nylatron®l sheave
Grade 316 Stainless Steel cheeks
Specifications:
Sheave Ø: 40.0mm(1-9/16")
Max. Rope Ø:10.0mm(3/8")
Max. Cable Ø: 5.0mm(3/16")
B.L.: 1,000kg(2,200lbs)
|
22.14 |
|
|
Series 20 BB Block Single Becket Option Lashing High Load
Features:
Suits up to 4mm (5/32”) lashing
Supplied with 750mm (30”) x 2mm (3/32”) diameter,
Dyneema® single braid lashing line
|
49.34 |
|
|
High Performance Cylinder w/Straight Arm for SilverSteer V1
Specially designed for high performance, high torque applications, the SilverSteer™ UC128 SVS cylinder is recommended for bass boats, flats boats and tournament fishing boats.
Compatible with competing helms, hoses and oil, the UC128-SVS is built to last with heavy duty stainless steel cylinder rod, seals and link assemblies.
Simple to install and fits almost every 2 and 4 stroke outboard engine in the market.
|
871.73 |
|
|
Roper Pump 2835M High Viscous Pump W/Rv
Roper's 2835 rotary pump is built for pumping highly viscous, molasses-based liquid feed supplements.
|
1257.30 |
|
|
Deluxe Anchor Trolley with Pulleys
The Deluxe Anchor Trolley will help users stop being victims of changing winds and currents while fishing in an anchored position. The YakGear Deluxe Anchor Trolley Kit allows the deployment of any anchor, drift chute, or stake-out pole before judging the current and wind while still remaining in a favorable fishing position. Without a trolley, users are limited to anchoring where it is reachable, causing the boat to swing back and forth. Mounted just off of the gunwale of any kayak or canoe, the deluxe trolley kit uses a nylon pulley system to select a desirable position anywhere from bow to stern, then maintains the positioning through the use of a 2-5/16-inch mini zig-zag cleat.
The deluxe system uses Harken pulleys to seamlessly pass trolley rope from bow to stern without the standard rubbing of rope along slightly less smooth pad eyes. The mounted pulleys are raised off of the boat enough to eliminate any unnecessary rubbing or scratching of the boat.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone and anchors are recommended but not included.
Features:
Deluxe anchor trolley system with Harken pulleys
It allows the bow of your vessel to turn into the current for a smoother experience
A mini zig-zag cleat is included, assisting in maintaining stable positioning
Installation instructions and hardware are included
The kit also includes 30 ft. of rope
1-year warranty
|
28.00 |
|
|
13mm Low Beam Track - 2M
This track is extruded from high-grade 6061-T6 aluminum and hard coat-anodized for a hard, long-lasting surface.
Specifications:
Weight (g): 429 g
Weight (oz): 15.1 oz
Mounting Hole Spacing (mm): 50 mm
Mounting Hole Spacing (in): 1-31/32 in
Fasteners (mm): 4 FH mm
Fasteners (in): #8 FH in
Minimum Curved Track Radius (m): 1.52 m
Minimum Curved Track Radius (ft): 5 ft
Length (m): 2 m
Length (ft in): 6' 7" ft in
Line Shedding Endstop: 2706
Splice Link: 2711
|
99.86 |
|
|
1 Ton Twing Block
The Twing block features a spring-loaded side opening mechanism for true one-handed rigging, even while wearing sailing gloves. Black anodized aluminum sideplates are edged with robust bumpers to protect the block, topsides, and deck. The sheave is aluminum rolling on a bearing system shared with Harken's existing 2.3T high-load snatch block.
Features:
Side opening side plate - Easy to rig and remove from sheet
Spring loaded button release - Quick one-handed rigging
Anti-capsize bar - Keeps sheave aligned on sheet
ULC main bearing - Sheave turns smoothly under extreme loading
Sideload balls - Carry loads especially when the block is not aligned in light air
Thimble at pivot base - Use 1:1 or 2:1 up-down control
Machined aluminum inner sideplates - High strength, low weight
Soft polyurethane outer side plate bumpers - Protects block and deck
Uses:
Twing, tweaker control for code zero sheets
Can be used as a snatch block when combined with a soft shackle
Spinnaker sheet and guy control
Specifications:
Sheave Ø (mm): 38.5 mm
Sheave Ø (in): 1-1/2 in
Maximum line Ø (mm): 11 mm
Maximum line Ø (in): .43 in
Maximum working load (kg): 1000 kg
Maximum working load (lb): 2205 lb
Breaking load (kg): 2000 kg
Breaking load (lb): 4409 lb
|
192.30 |
|
|
Micro Cam-Matic Aluminum Cleat
Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.
Specifications:
Height: 22mm / 7/8in.
Length: 48mm / 1-7/8in.
Width: 24mm / 15/16in.
Weight: 26g / .93oz
Minimum line: 2mm / 3/32in
Maximum line: 6mm / 1/4in.
Fastener spacing: 27mm / 1-1/16in.
Fasteners: 4 RH mm / #8 RH in.
Maximum working load: 91kg/ 200lb
Breaking load: 181kg / 400lb
Pawls: Aluminum
|
28.42 |
|
|
57mm Carbo Air Block with Swivel
Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming.
Specifications:
Sheave: 57mm / 2-1/4in
Length: 110mm / 4-5/16in
Weight: 87g / 3.1oz
Shackle pin: 5mm / 3/16in
Maximum line: 10mm / 3/8in
Maximum working load: 359kg / 792lb
Breaking load: 1079kg / 2380lb
|
42.58 |
|
|
40mm Carbo Air Block with Swivel
Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming.
Specifications:
Sheave: 40mm / 1-9/ 16in
Length: 86mm / 3-3/8in
Weight: 44g / 1.6oz
Shackle pin: 4mm / 5/32in
Maximum line: 10mm / 3/8in
Maximum working load: 220kg / 485lb
Breaking load: 735kg / 1620lb
|
29.28 |
|