|
13mm Low Beam Track - 2M
This track is extruded from high-grade 6061-T6 aluminum and hard coat-anodized for a hard, long-lasting surface.
Specifications:
Weight (g): 429 g
Weight (oz): 15.1 oz
Mounting Hole Spacing (mm): 50 mm
Mounting Hole Spacing (in): 1-31/32 in
Fasteners (mm): 4 FH mm
Fasteners (in): #8 FH in
Minimum Curved Track Radius (m): 1.52 m
Minimum Curved Track Radius (ft): 5 ft
Length (m): 2 m
Length (ft in): 6' 7" ft in
Line Shedding Endstop: 2706
Splice Link: 2711
|
99.86 |
|
|
158 1" Ball with Low Profile Track Mount
Adapt your Scotty low profile track to our 1″ ball mounting system. For use with all Scotty 1″ ball mounts and Scotty low profile tracks.
Features:
1″ Ball with Track Adapter
|
13.39 |
|
|
168 1-1/2" Ball with Low Profile Track Mount
Adapt your Scotty low profile track to our 1.5″ ball mounting system. For use with all Scotty 1.5″ ball mounts and Scotty low profile tracks.
Features:
1.5" Ball with Track Adapter
|
16.30 |
|
|
Low Profile Track - Black - 4"
Low Profile Track is made from corrosion proof high strength composite material that will last a lifetime. The lowest profile track on the market and a top load design allows for quick and easy setup of all your Scotty accessories. Install Scotty's Low Profile Track on your kayak, canoe, or any other watercraft. Slide the Scotty 438 Gear-Head Track Adapter(sold seperately) into the track, click in your favorite Scotty rod holder or accessory and start fishing.
Dimensions: 1-3/4" wide x 3/8" tall x 7" long (4" usable track)
|
8.35 |
|
|
Low Profile Track - Black - 8"
Low Profile Track is made from corrosion proof high strength composite material that will last a lifetime. The lowest profile track on the market and a top load design allows for quick and easy setup of all your Scotty accessories. Install Scotty's Low Profile Track on your kayak, canoe, or any other watercraft. Slide the Scotty 438 Gear-Head Track Adapter(sold seperately) into the track, click in your favorite Scotty rod holder or accessory and start fishing.
Dimensions: 1-3/4" wide x 3/8" tall x 10-3/4" long (8" usable track)
|
11.28 |
|
|
0440-BK-1 Low Profile Track - 1"
The No. 440-BK-1 Low Profile Track is made from corrosion proof high strength composite material that will last a lifetime
The lowest profile track on the market and a top load design allows for quick and easy setup of all your Scotty Rod Holders and Accessories
Easily install Low Profile Track on your kayak, canoe, or any other watercraft
Slide the Scotty No. 438 Gear-Head Track Adapter into the track, click in your favourite Scotty Rod Holder or Accessory and start fishing
(Gear-Head Adapter, Rod Holder and Accessories not included)
Track Dimensions: 1 3/4” wide x 3/8” tall x (1” usable track)
|
5.28 |
|
|
13mm High-Load Trolley with 2X M4 Tapped Holes
This trolley features recirculating ball bearings housed in strong, lightweight, corrosion-resistant aluminum for dependable, low-friction linear travel. Use for moving loads and equipment, hoisting, and moving stage equipment, and architectural solutions.
Features:
High-load trolley with two M4-tapped holes on top
Torlon® ball bearings handle high loads, reducing friction so the trolley moves smoothly along the rail
Retaining clips keep ball bearings captive when the trolleys are removed for maintenance
Specifications:
Length (mm): 56 mm
Length (in): 2-3/16 in
Width (mm): 40 mm
Width (in): 1-9/16 in
Weight (g): 57 g
Maximum Rated Load (kN): 1.4 kN
Height (mm): 19 mm
Height (in): 3/4 in
Weight (oz): 2.01 oz
Breaking Load (kN): 6.7 kN
|
87.73 |
|
|
Baitcaster Rod HolderTrack Combo w/Gearhead & 4" Track
Includes:
280 Baitcaster / Spinning Rod Holder
438 Gear-Head
440-4 Low Profile Track
The Baitcaster / Spinning Rod holder is a versatile rod holder for any angler. The baitcaster reel sits in a cushioned cradle while a front slot allows for a spinning reel. The open bottom allows for the rod holder to accommodate trigger grips as well. Rods can be secured with a soft latching strap which snaps over the top for baitcaster or under the bottom for spinning reels. The 438 Gear-Head Track Adapter quickly slides into place and locks down Scotty rod holders and accessories, this allows you to quickly change rod holder positions with a simple twist. The Scotty 440-4 Low Profile Track is made from high strength composite material. The track can be quickly and easily installed on a kayak, canoe or any other watercraft.
Dimensions: 1-3/4" wide x 3/8" tall x 7" long (4" usable track)
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
27.88 |
|
|
Ball Mounting System w/Gear-Head & Track
Features:
The new Scotty Ball Mounting System with Gear-Head and Low Profile Track provides a mounting receptacle for a variety of Scotty post mount accessories
The Gear-Head’s effortless drop and lock system allows the user to secure and re-position post mount accessories with just a twist
The Scotty No. 151 comes with Scotty’s new No. 440 Low Profile Track that allows for quick and easy set up
The ball joint design of the Scotty No. 151 enables a smooth, full range of motion
Made from corrosion proof construction, this system provides a long service life in both fresh and salt water applications
Rod Holders or Scotty Accessories not included
Track Dimensions: 1-3/4” wide x 3/8” tall x (1” usable track)
Mount Height: Stands 9″ tall
|
28.24 |
|
|
March 0125-0141-0100 Marine Pump LC-2M-MD
March Pump’s industrial LC-2M-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 5 gallons per minute at 1 foot, and its maximum head is 13 Feet (5.5PSI). The LC-2M-MD pump may be used submerged or not submerged. The pump is Ignition Protected per SAE J1171 and ISO 8846. It is capable of 12,000 BTU a hour.
Max Flow: 5 GPM
Max Head: 13 FT
Power: 0.02 HP
Electrical/Air: 115V 50/60Hz
115V Motor
6 Foot Cord, Submersible
60Hz: 1Ph 0.2HP/0.015kW, 0.92 AMPS, 3450RPM
50Hz: 1Ph 0.18HP/0.014kW, 1.1 AMPS, 2850RPM
Inlet: 3/8"FPT & 3/4"MPT
Outlet: 1/4"MPT
Submersible: Yes
Wet End: Polypropylene (Front Housing, Impeller), Nylon (Rear Housing) Viton (O-Ring), Buna N (O-Ring, Cooling Tube Seal), 316 Stainless Steel (Shaft, Cooling Tube), Ceramic (Thrust Washer), Ceramic Magnet
Uses: Submersible or Open Air
When submerged, the following is also in contact with the solution: Epoxy, Buna N, Cord
Max Internal Pressure: 25 PSI / 1.7 bar
Max Internal Temperature: 130 °F / 54 °C
Ignition Protected per SAE J1171 and ISO 8846: Rated IP67
|
294.84 |
|
|
March 0125-0142-0100 Marine Pump LC-2M-MD
March Pump’s industrial LC-2M-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 5 gallons per minute at 1 foot, and its maximum head is 13 Feet (5.5PSI). The LC-2M-MD pump may be used submerged or not submerged. The pump is Ignition Protected per SAE J1171 and ISO 8846. It is capable of 12,000 BTU a hour.
Max Flow: 18.5 LPM
Max Head: 2.7 M
Power: 0.014 KW
Electrical/Air: 230V 50/60Hz
230V Motor
6 Foot Cord, Submersible
60Hz: 1Ph 0.025HP/0.019kW, 0.53 AMPS, 3450RPM
50Hz: 1Ph 0.18HP/0.014kW, 0.72 AMPS, 2850RPM
Inlet: 3/8"FPT & 3/4"MPT
Outlet: 1/4"MPT
Submersible: Yes
Wet End: Polypropylene (Front Housing, Impeller), Nylon (Rear Housing) Viton (O-Ring), Buna N (O-Ring, Cooling Tube Seal), 316 Stainless Steel (Shaft, Cooling Tube), Ceramic (Thrust Washer), Ceramic Magnet
Uses: Submersible or Open Air
When submerged, the following is also in contact with the solution: Epoxy, Buna N, Cord
Max Internal Pressure: 25 PSI / 1.7 bar
Max Internal Temperature: 130 °F / 54 °C
Ignition Protected per SAE J1171 and ISO 8846: Rated IP67
|
321.75 |
|
|
4mm Shallow Bow Shackle
Forged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter.
Bow shackles are best for multidirectional loads. Shallow bow shackles are proportionally wider for their length than regular bow shackles.
Specifications:
Shackle pin: 4mm / 5/32in
Weight: 8.5g / 0.3oz
Maximum working load: 367kg / 810lb
Breaking load: 735kg / 1620lb
|
7.19 |
|
|
5mm Shallow Bow Shackle
Forged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter.
Bow shackles are best for multidirectional loads. Shallow bow shackles are proportionally wider for their length than regular bow shackles.
Specifications:
Shackle pin: 5mm / 3/16in
Weight: 14.5g / 0.51oz
Maximum working load: 540kg / 1190lb
Breaking load: 1080kg / 2380lb
|
9.79 |
|
|
Tuthill 2M-34.003 Gasket LA/LE
|
14.92 |
|
|
Link-9 VHF Radio with DSC & AIS Receiver
Features:
Lowrance Link-9 Replaces the current Link-8 VHF
Front mountable design for easy installation
Industrial Design to align with style of Lowrance MFDs
Seamless integration with a wider B & G system through NMEA 2000 and 0183
Built-in AIS Receiver
Large screen with intuitive user interface
Unique Selling Points:
GPS 4-Ways:
With the integrated GPS receiver the Link-9 now has four ways to ensure you have a GPS fix in the event of an emergency.
A GPS antenna in the face of the radio means open air installations don’t need another antenna at all
An SMA connector on the rear case allows for connection to a GPS-500 antenna
NMEA 0183 allows you to get GPS from a chartplotter
NMEA 2000 means you don’t need another antenna if you already have one in your network
Built in AIS:
A dual-channel AIS receiver monitors the position of nearby AIS-equipped vessels, helping you to avoid collisions in crowded harbours and waterways.
AIS information can be viewed on the Link-9’s built-in screen, or overlaid on your chart or radar screen through a compatible multifunction display.
Remote Mountable Fist Mic:
The Link-9’s removable fist mic can be connected to the front or rear of the radio, and optional extension cable allows the radio and mic to be mounted separately.
This offers a simple and cost-effective solution for any mounting location, with no cable clutter.
For example, the Link-9 can be mounted overhead, with no hanging cables, while the mic is connected to an extension socket on the dash below.
Mount From The Front:
Link-9 features easily removable top and bottom bezels which reveal mounting holes allowing the same style of mounting from the front that is featured on Lowrance MFDs.
Track Buddy:
Track buddy is a feature that automatically requests the position of another VHF radio. Simply enter the MMSI of the VHF into your contact list, then start tracking!
Track up to 5 buddies
Polls your contacts for their Lat/Long position automatically
Can be set to 1, 5, 15, 30 or 60 minute intervals
Displays the position on a compatible chart plotter
Great for keeping track of friends, family or vessels you need to know the position of that don’t have AIS
Navigation Mode:
Press the NAV button on the Link-9 to turn it into a navigational instrument displaying your Speed and Course.
Link-9 also contains a Man Overboard (MOB) function, hold down the NAV/MOB button to drop a waypoint on your current location and the Link-9 will enter MOB mode to show you how far away you are and where you need to steer to get back to the position of the MOB event. The MOB waypoint is also transmitted over NMEA 2000 to the rest of your network.
|
664.80 |
|