|
Micro Cam-Matic Aluminum Cleat
Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.
Specifications:
Height: 22mm / 7/8in.
Length: 48mm / 1-7/8in.
Width: 24mm / 15/16in.
Weight: 26g / .93oz
Minimum line: 2mm / 3/32in
Maximum line: 6mm / 1/4in.
Fastener spacing: 27mm / 1-1/16in.
Fasteners: 4 RH mm / #8 RH in.
Maximum working load: 91kg/ 200lb
Breaking load: 181kg / 400lb
Pawls: Aluminum
|
28.42 |
|
|
Micro Cam-Matic Aluminum Cleat Kit with Wire Fairlead
Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes 468 Cam-Matic® and 475 wire fairlead.
Specifications:
Weight: 33g / 1.2oz
Maximum working load: 91kg / 200lb
|
35.28 |
|
|
Standard Cam-Matic® Aluminum Cleat
Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.
Specifications:
Height: 30 mm / 1-3/16 in
Length: 65 mm / 2-9/16 in
Width: 32 mm / 1-1/4 in
Weight: 71 g / 2.5 oz
Minimum line: 3 mm / 1/8 in
Maximum line:12 mm / 1/2 in
Fastener spacing: 38 mm / 1-1/2 in
Fasteners: 5 FH mm / 10 FH in
Maximum working load: 136 kg / 300 lb
Breaking load: 340 kg / 750 lb
Pawls: Aluminum
|
34.75 |
|
|
Standard Cam-Matic® Aluminum Kit with Wire Fairlead
Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes hardcoat-anodized 150 aluminum Cam-Matic® and 298 wire fairlead.
Specifications:
Weight: 85g / 3 oz.
Maximum working load: 136kg / 300lb.
|
44.35 |
|
|
40mm Carbo Air Pivoting Lead Block with Aluminum Cam-Matic® Cleat
High-strength pivoting lead blocks with cams are used for halyard controls on larger keelboats and as “headknockers” on dinghies and beachcats for sheeting directly from the boom. Hole spacing and rivet size are the same as Classic models, making upgrades easy. Cam reverses for either up or down cleating.
Can be used as becket block.
Specifications:
Sheave Ø (mm)40 mm
Sheave Ø (in)1 9/16 in
Maximum line Ø (mm)10 mm
Maximum line Ø (in)3/8 in
Maximum working load (kg)136 kg
Maximum working load (lb)300 lb
|
68.56 |
|
|
Micro Carbo-Cam Cleat
Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for racing where weight is critical, or where adjustments are less frequent.
Specifications:
Height: 22mm / 7/8in.
Length: 48mm / 1-7/8in.
Width: 24mm / 15/16in.
Weight: 19g / .67oz
Minimum line: 3mm / 1/8in
Maximum line: 6mm / 1/4in.
Fastener spacing: 27mm / 1-1/16in.
Fasteners: 4 RH mm / #8 RH in.
Maximum working load: 68kg/ 150lb
Breaking load: 136kg / 300lb
Pawls: Plastic carbon-matrix
|
24.97 |
|
|
Micro Carbo Cam Cleat - No Original Packaging
Harken® ball-bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for racing where weight is critical or where adjustments are less frequent.
Specifications:
Height (in): 7/8 in
Height (mm): 22 mm
Length (in): 1-7/8 in
Length (mm): 48 mm
Width (mm): 24 mm
Width (in): 15/16 in
Weight (g): 19 g
Weight (oz): 0.67 oz
Maximum line Ø (mm): 6 mm
Maximum line Ø (in): 1/4 in
Fasteners (mm): 4 RH mm
Fasteners (in): #8 RH in
Maximum working load (kg): 68 kg
Maximum working load (lb): 150 lb
Breaking load (kg): 136 kg
Breaking load (lb): 300 lb
Minimum line Ø (mm): 3 mm
Minimum line Ø (in): 1/8 in
Fastener spacing (mm): 27 mm
Fastener spacing (in): 1-1/16 in
Pawls: Plastic carbon-matrix
|
23.06 |
|
|
Micro Carbo-Cam Cleat Kit with Wire Fairlead
Wire fairleads maintain a low profile while holding the line close to the cleat.
Kit includes lightweight, fiber-reinforced 471 Carbo Cam, and 475 wire fairlead.
Specifications:
Weight: 26g / 0.9oz
Maximum working load: 68kg / 150lb
|
31.84 |
|
|
Micro Carbo-Cam Base with Bullseye - Fishing
471 Micro Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base.
Specifications:
Height: 22mm / 7/8in.
Weight: 50g / 1.75oz
Minimum line: 3mm / 1/8in
Maximum line: 6mm / 1/4in
Fastener spacing: 27mm / 1-1/16in
Fasteners: 4 FH mm / #8 FH in
Maximum working load: 68kg/ 150lb
|
39.97 |
|
|
Micro Carbo-Cam Base with Bullseye
Micro Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base.
Specifications:
Height: 22mm / 7/8in.
Weight: 50g / 1.75oz
Minimum line: 3mm / 1/8in
Maximum line: 6mm / 1/4in
Fastener spacing: 27mm / 1-1/16in
Fasteners: 4 FH mm / #8 FH in
Maximum working load: 68kg/ 150lb
|
41.17 |
|
|
Aluminum-S-Cleats
These Aluminum-S-Cleat come in sizes to fit all boats.
Pick from 10", 12", 15", or 18" S cleats
Made from 356 Corrosion-Resistant cast Aluminum these S Cleats are built to withstand the harshest marine environments. No matter the conditions you can trust these cleats. There is also a 10 year warranty on them.
|
0.00 |
|
|
Add-A-Cleat
A versatile cleat easily mounts to a stanchion or rail 7/8" and 1" diameter ( will accommodate larger sizes with longer clamp). Construction consists of a husky Stainless Steel bracket and clamp with a 4-1/2" nylon coated aluminum cleat. Use them for fenders and flag halyards. Installation is easily made with a screwdriver.
|
30.38 |
|
|
Midrange Single with Aluminum Sheave Block
Midrange blocks’ robust construction makes them ideal to handle the high loads found on medium and large offshore boats. Sheave runs exclusively on a ball bearing system for fast trim and release under any load.
Features:
Sheave: 76mm/3"
Maximum Line: 14mm/9/16"
Max Working Load: 1270kg/2800lbs
|
154.24 |
|
|
Automatic Leveling Control - Single Actuator
As wind shifts, water conditions change or passengers move about, the Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride.
The ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy.
Features:
Microprocessor based automatic leveling trim tab control with LED tab position indicators
Controls roll and pitch automatically
Internal GPS - no GPS antenna or network required
Automatically adapts to varying sea conditions
Completely sealed and waterproof (IP68)
UV protected - will not deteriorate in sunlight
Prevents automatic corrections while turning
Designed for planing and semi displacement hulls larger than 20ft
Actuators connect directly to ALC-1 display panel (no external power module box required)
Automatically dims LED tab position indicators in darkness and brightens in sunlight
Automatically retracts trim tabs when boat is off plane or using optional key switch connection
Technical Specifications:
Display Color - Black
Actuators per Tab Plate - One (1)
Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
Mounting Hole Cutout - 2" (50 mm)
Operating Voltage - 12 or 24 V
*Sold as an Individual
|
998.30 |
|
|
Bosworth 1.5 Aluminum Inlet Aluminum Fitting 1.5Npt
|
93.55 |
|