|
Primarily used for fuel tank vent outside of the engine compartment. For pleasure boats only. Temperature range is -5°F to +180°F. Meets SAE J1527 Type B2 standards.
|
215.00 |
|
|
Primarily used for fuel tank vent outside of the engine compartment. For pleasure boats only. Temperature range is -5°F to +180°F. Meets SAE J1527 Type B2 standards.
|
125.00 |
|
|
Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.
|
168.00 |
|
|
Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.
|
185.00 |
|
|
Resists gasoline/alcohol blended fuel and is fire resistant. Weather/UV resistant NBR/PVC cover, temp range -20°F to 160°F. Primarily used for fuel vent lines (gasoline up to 85% ethanol blended fuel, or diesel fuel). Meets USCG Type A2, SAE J1527 Type A2 and ISO 7840 Type A2 requirements, NMMA/CE Type accepted standards.
|
246.00 |
|
|
Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.
|
195.00 |
|
|
OMC 479 type cable (1979 & later). Complete drop-in replacement cable for OMC O/B and I/O's. Stainless steel and brass fittings. 6" minimum bend radius. WHILE QUANTITIES LAST.
|
74.99 |
|
|
Mercury/Mercruiser 600A type cable. Complete drop-in replacement cable for Mercury/Mercruiser engines. Stainless steel & brass fittings. Stainless cable wire. WHILE QUANTITIES LAST.
|
64.59 |
|
|
Mercury/Mercruiser 600A type cable. Complete drop-in replacement cable for Mercury/Mercruiser engines. Stainless steel & brass fittings. Stainless cable wire. WHILE QUANTITIES LAST.
|
76.79 |
|
|
Designed specifically to be used with late model Mercury 4000 series controls. Engineered to significantly reduce or eliminate cable "Wig-Wag", this design results in a significantly improved feel with less shifting effort. Improves the feel of the Mercury 4000 Series Controls. Nickel plated brass swivel tube. WHILE QUANTITIES LAST.
|
76.99 |
|
|
Double Sided 1-1/8" Quick Connect Fitting with O-Rings for Auto Ballast System
Quick Release Connect on either end allowing it to connect to either the straight and elbow Quick Release Connectors. A great jumper fitting for those that want to remove their piggy backed ballast bag.
*Sold as an Individual
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
16.78 |
|
|
Constructed with THV barrier layer to prevent permeation, polyester reinforcement and CPE weather and UV resistant cover. EPA and CARB compliant. Hose construction is easy to rig, clamp and maintains flexibility under a range of extreme environmental conditions. Gray color keeps hose cooler to help prevent vapor lock. For use in above deck primer bulb applications. Resistant to ethanol blend fuels. Not fire retardant. Meets SAE J1527 Type B1-15 requirements.
|
154.00 |
|
|
8" ID x 6' Long Silicone Marine Wet Exhaust & Water Hose - Blue
Trident Silicone Marine Wet Exhaust and Water-Coolant Hose is the ultimate in extra thick soft wall silicone quality with very high-temperature performance and extra long service life. Exceeds SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards. #202V Glossy Blue “Very Hi Temp” has 4-6 ply polyester reinforcement and 350°F (177°C) Max. Used worldwide on premium boats, yachts, and special service vessels. It has become the super yacht standard.
|
703.52 |
|
|
Blue Silicone Wet Exhaust Hump with 4 T-Bolt Clamps - 8" ID x 8" Length
Trident Silicone Hump Hose Bellows provide the ultimate flexible connectors for marine wet exhaust systems. They offer much greater tolerance to heat, misalignment, engine movement, and vibration, with significant savings in cost, parts, labor, and space.
Construction:
Tube & Cover: VHT blue silicone
Color: Blue
Reinforcement: Polyester reinforcement
Temperature Range: 350°F (177°C)
Specifications:
Inner Diameter: (inch) 8" / (mm) 203.2
Outer Diameter: (inch) 8.5" / (mm) 216
Working Pressure: (Psi) 15 / (Bar) 1
*Burst Pressure is 4 x Working Pressure
|
230.23 |
|
|
Jabsco 93003-8240# Hose 5/8" Id
|
4.00 |
|