|
8" ID x 6' Long Silicone Marine Wet Exhaust & Water Hose - Blue
Trident Silicone Marine Wet Exhaust and Water-Coolant Hose is the ultimate in extra thick soft wall silicone quality with very high-temperature performance and extra long service life. Exceeds SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards. #202V Glossy Blue “Very Hi Temp” has 4-6 ply polyester reinforcement and 350°F (177°C) Max. Used worldwide on premium boats, yachts, and special service vessels. It has become the super yacht standard.
|
703.52 |
|
|
1-1/2" x 50' Coil - Flex Marine Wet Exhaust & Water Hose - Black
Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.
Features:
Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius
Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved
Application:
Trident Flex wet exhaust hose for longer bent connections
In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses
Construction:
Tube & Cover: High temp EDPM rubber
Color: Black with blue stripe
Reinforcement: Multi-ply, high-tenacity polyester, steel helix
Temperature Range: 250°F (121°C)
Length: 50’ (15.24m)
Specifications:
Inner Diameter: (inch) 1-1/2" / (mm) 38
Outer Diameter: (inch) 1.97 / (mm) .05
Working Pressure: (Psi) 60 / (bar) 4.1
Bend Radius: (inch) 4.0" / (mm) 102
Weight: (Lb./50ft.) 45 / (Kg/m) .518
*Burst Pressure is 4 x Working Pressure
|
517.72 |
|
|
1-1/4" x 50' Coil Flex Marine Wet Exhaust & Water Hose - Black
Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.
Features:
Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
Resists heat, ozone, exhaust, sani chemicals, panting and collapse
Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved
Application:
Trident Flex wet exhaust hose for longer bent connections
In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses
Construction:
Tube & Cover: High temp EDPM rubber
Color: Black with blue stripe
Reinforcement: Multi-ply, high-tenacity polyester, steel helix
Temperature Range: 250°F (121°C)
Length: 50’ (15.24m)
Specifications:
Inner Diameter: (inch) 1-1/4" / (mm) 31.8
Outer Diameter: (inch) 1.40" / (mm) 32
Working Pressure: (Psi) 70 / (bar) 4.8
Bend Radius: (inch) 1.5" / (mm) 38
Weight: (Lb./50ft.) 35 / (Kg/m) 15.7
*Burst Pressure is 4 x Working Pressure
|
425.15 |
|
|
3/4" x 50' Coil Flex Marine Wet Exhaust & Water Hose - Black
Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.
Features:
Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
Resists heat, ozone, exhaust, sani chemicals, panting and collapse
Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved
Application:
Trident Flex wet exhaust hose for longer bent connections
In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses
Construction:
Tube & Cover: High temp EDPM rubber
Color: Black with blue stripe
Reinforcement: Multi-ply, high-tenacity polyester, steel helix
Temperature Range: 250°F (121°C)
Length: 50’ (15.24m)
Specifications:
Inner Diameter: (inch) 3/4" / (mm) 20
Outer Diameter: (inch) 1.15" / (mm) 29
Working Pressure: (Psi) 100 / (bar) 6.9
Bend Radius: (inch) 1" / (mm) 25
Weight: (Lb./50ft.) 23 / (Kg/m) 10.3
*Burst Pressure is 4 x Working Pressure
|
365.15 |
|
|
1" x 50' Coil Flex Marine Wet Exhaust & Water Hose - Black
Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.
Features:
Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
Resists heat, ozone, exhaust, sani chemicals, panting and collapse
Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved
Application:
Trident Flex wet exhaust hose for longer bent connections
In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses
Construction:
Tube & Cover: High temp EDPM rubber
Color: Black with blue stripe
Reinforcement: Multi-ply, high-tenacity polyester, steel helix
Temperature Range: 250°F (121°C)
Length: 50’ (15.24m)
Specifications:
Inner Diameter: (inch) 1" / (mm) 25.4
Outer Diameter: (inch) 1.57" / (mm) 25
Working Pressure: (Psi) 80 / (bar) 5.5
Bend Radius: (inch) 1.3" / (mm) 33
Weight: (Lb./50ft.) 30 / (Kg/m) 13.5
*Burst Pressure is 4 x Working Pressure
|
402.85 |
|
|
1-1/4" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the Foot
Trident Flex wet exhaust hose for longer bent connections. In smaller i.d.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.
Features:
Sold by the foot
Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius
Resists heat, ozone, exhaust, sani chemicals, panting, and collapse
Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved
Application:
Trident Flex wet exhaust hose for longer bent connections
In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses
Construction:
Tube & Cover: High temp EDPM rubber
Color: Black with blue stripe
Reinforcement: Multi-ply, high-tenacity polyester, steel helix
Temperature Range: 250°F (121°C)
Specifications:
Inner Diameter: (inch) 1-1/4" / (mm) 31.8
Outer Diameter: (inch) 1.40" / (mm) 32
Working Pressure: (Psi) 70 / (bar) 4.8
Bend Radius: (inch) 1.5" / (mm) 38
Weight: (Lb./50 ft.) 35 / (Kg/m) 15.7
*Burst Pressure is 4 x Working Pressure
|
11.90 |
|
|
1-1/2" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the Foot
Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.
Features:
Sold by the foot
Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius
Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved
Application:
Trident Flex wet exhaust hose for longer bent connections
In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses
Construction:
Tube & Cover: High temp EDPM rubber
Color: Black with blue stripe
Reinforcement: Multi-ply, high-tenacity polyester, steel helix
Temperature Range: 250°F (121°C)
Specifications:
Inner Diameter: (inch) 1-1/2" / (mm) 38
Outer Diameter: (inch) 1.97 / (mm) .05
Working Pressure: (Psi) 60 / (bar) 4.1
Bend Radius: (inch) 4.0" / (mm) 102
Weight: (Lb./50ft.) 45 / (Kg/m) .518
*Burst Pressure is 4 x Working Pressure
|
14.50 |
|
|
3/4" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the Foot
Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.
Features:
Sold by the foot
Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius
Resists heat, ozone, exhaust, sani chemicals, panting, and collapse
Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved
Application:
Trident Flex wet exhaust hose for longer bent connections
In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses
Construction:
Tube & Cover: High temp EDPM rubber
Color: Black with blue stripe
Reinforcement: Multi-ply, high-tenacity polyester, steel helix
Temperature Range: 250°F (121°C)
Specifications:
Inner Diameter: (inch) 3/4" / (mm) 20
Outer Diameter: (inch) 1.15" / (mm) 29
Working Pressure: (Psi) 100 / (bar) 6.9
Bend Radius: (inch) 1" / (mm) 25
Weight: (Lb./50ft.) 23 / (Kg/m) 10.3
*Burst Pressure is 4 x Working Pressure
|
10.22 |
|
|
1" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the Foot
Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.
Features:
Sold by the foot
Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius
Resists heat, ozone, exhaust, sani chemicals, panting, and collapse
Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved
Application:
Trident Flex wet exhaust hose for longer bent connections
In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses
Construction:
Tube & Cover: High temp EDPM rubber
Color: Black with blue stripe
Reinforcement: Multi-ply, high-tenacity polyester, steel helix
Temperature Range: 250°F (121°C)
Specifications:
Inner Diameter: (inch) 1" / (mm) 25.4
Outer Diameter: (inch) 1.57" / (mm) 25
Working Pressure: (Psi) 80 / (bar) 5.5
Bend Radius: (inch) 1.3" / (mm) 33
Weight: (Lb./50ft.) 30 / (Kg/m) 13.5
*Burst Pressure is 4 x Working Pressure
|
11.28 |
|
|
OC15109-6 Steering Cable
8" Stroke x 6' long
For use with Type R Remote Drive Unit
|
152.71 |
|
|
Blue Silicone Wet Exhaust Hump with 4 T-Bolt Clamps - 8" ID x 8" Length
Trident Silicone Hump Hose Bellows provide the ultimate flexible connectors for marine wet exhaust systems. They offer much greater tolerance to heat, misalignment, engine movement, and vibration, with significant savings in cost, parts, labor, and space.
Construction:
Tube & Cover: VHT blue silicone
Color: Blue
Reinforcement: Polyester reinforcement
Temperature Range: 350°F (177°C)
Specifications:
Inner Diameter: (inch) 8" / (mm) 203.2
Outer Diameter: (inch) 8.5" / (mm) 216
Working Pressure: (Psi) 15 / (Bar) 1
*Burst Pressure is 4 x Working Pressure
|
230.23 |
|
|
8" ID Blue Silicone Molded Wet Exhaust Hump with 4 T-Bolt Clamp
This silicone and rubber hump hose provides the ultimate flexible connector for marine wet exhaust systems. The hump hose offers much greater tolerance to heat, misalignment, engine movement, and vibration, with significant savings in cost, parts, labor, and space.
Construction:
Tube & Cover: VHT blue silicone
Color: Blue
Reinforcement: EPDM Silicone Rubber
Temperature Range: 350°F (177°C)
Specifications:
Inner Diameter: (inch) 8" / (mm) 203
Outer Diameter: (inch) 8.5" / (mm) 215.9
Working Pressure: (Psi) 15 / (Bar) 1
*Burst Pressure is 4 x Working Pressure
|
197.57 |
|
|
Blue Silicone Wet Exhaust Hump with 4 T-Bolt Clamps - 6" ID x 8" Length
Trident Silicone Hump Hose Bellows provide the ultimate flexible connectors for marine wet exhaust systems. They offer much greater tolerance to heat, misalignment, engine movement, and vibration, with significant savings in cost, parts, labor, and space.
Construction:
Tube & Cover: VHT blue silicone
Color: Blue
Reinforcement: Polyester reinforcement
Temperature Range: 350°F (177°C)
Specifications:
Inner Diameter: (inch) 6" / (mm) 152.4
Outer Diameter: (inch) 6.5" / (mm) 165
Working Pressure: (Psi) 15 / (Bar) 1
*Burst Pressure is 4 x Working Pressure
|
190.12 |
|
|
8" ID 45-Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt Clamps
Trident silicone-blend rubber marine wet exhaust connections. They are molded in very high-temperature blue silicone EPDM blended rubber with a smooth bore and cover; except elbows of 6" I.D. or larger have molded reinforcing ribs on the outside.
Features:
Four stainless steel t-bolt clamps
Very high temp silicone/EDPM blend rubber - molded
This elbow has excellent resistance to ozone, salt water, diesel fumes, splash, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1) exhaust standards
Blue very high-temperature silicone blended with EDPM rubber at 350°F (177°C) max continuous
Construction:
Color: Blue
Reinforcement: Reinforcing ribs on 6” I.D. and above
Temperature Range: up to 350°F (177°C)
Specifications:
Inner Diameter: (inch) 8” / 203.2 mm
A: (inch) 2.25” / (mm) 5.7
B: (inch) 2.25” / (mm) 5.7
C: (inch) 8.5” / (mm) 21
R: (inch) 2.12” / (mm) 5.4
W: (inch) 0.37" / (mm) 9.4
Elbow Degree: 45 degrees
|
304.79 |
|
|
8" ID 45-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt Clamps
Trident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.
Features:
Four stainless steel clamps are included
This elbow has excellent resistance to ozone, salt water, diesel fumes and splashes, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards)
Black high-temp EDPM rubber
Construction:
Color: Black
Reinforcement: Reinforcing ribs on 6” I.D. and above
Temperature Range: up to 250°F (121°C)
Specifications:
Inner Diameter: (inch) 8” / (mm) 203
Outer Diamter: (inch) 8.74" / (mm) 222.0
A: (inch) 2.25” / (mm) 57.2
B: (inch) 2.25” / (mm) 57.2
C: (inch) 8.25” / (mm) 209.5
W: (inch) 0.37” / (mm) 9.4
Elbow Degree: 45 degrees
Weight: (Lb/Ea) 4.3 / (Kg/Ea) 1.95
|
211.63 |
|