 |
Blue Silicone Wet Exhaust Hump with 4 T-Bolt Clamps - 8" ID x 8" Length
Trident Silicone Hump Hose Bellows provide the ultimate flexible connectors for marine wet exhaust systems. They offer much greater tolerance to heat, misalignment, engine movement, and vibration, with significant savings in cost, parts, labor, and space.
Construction:
Tube & Cover: VHT blue silicone
Color: Blue
Reinforcement: Polyester reinforcement
Temperature Range: 350°F (177°C)
Specifications:
Inner Diameter: (inch) 8" / (mm) 203.2
Outer Diameter: (inch) 8.5" / (mm) 216
Working Pressure: (Psi) 15 / (Bar) 1
*Burst Pressure is 4 x Working Pressure
|
230.23 |
|
 |
Blue Silicone Wet Exhaust Hump with 4 T-Bolt Clamps - 6" ID x 8" Length
Trident Silicone Hump Hose Bellows provide the ultimate flexible connectors for marine wet exhaust systems. They offer much greater tolerance to heat, misalignment, engine movement, and vibration, with significant savings in cost, parts, labor, and space.
Construction:
Tube & Cover: VHT blue silicone
Color: Blue
Reinforcement: Polyester reinforcement
Temperature Range: 350°F (177°C)
Specifications:
Inner Diameter: (inch) 6" / (mm) 152.4
Outer Diameter: (inch) 6.5" / (mm) 165
Working Pressure: (Psi) 15 / (Bar) 1
*Burst Pressure is 4 x Working Pressure
|
190.12 |
|
 |
6" ID Blue Silicone Molded Wet Exhaust Hump with 4 T-Bolt Clamp
This silicone and rubber hump hose provides the ultimate flexible connector for marine wet exhaust systems. The hump hose offers much greater tolerance to heat, misalignment, engine movement, and vibration, with significant savings in cost, parts, labor, and space.
Construction:
Tube & Cover: VHT blue silicone
Color: Blue
Reinforcement: EPDM Silicone Rubber
Temperature Range: 350°F (177°C)
Specifications:
Inner Diameter: (inch) 6" / (mm) 152.4
Outer Diameter: (inch) 6.5" / (mm) 165.1
Working Pressure: (Psi) 15 / (Bar) 1
*Burst Pressure is 4 x Working Pressure
|
189.68 |
|
 |
8" ID Blue Silicone Molded Wet Exhaust Hump with 4 T-Bolt Clamp
This silicone and rubber hump hose provides the ultimate flexible connector for marine wet exhaust systems. The hump hose offers much greater tolerance to heat, misalignment, engine movement, and vibration, with significant savings in cost, parts, labor, and space.
Construction:
Tube & Cover: VHT blue silicone
Color: Blue
Reinforcement: EPDM Silicone Rubber
Temperature Range: 350°F (177°C)
Specifications:
Inner Diameter: (inch) 8" / (mm) 203
Outer Diameter: (inch) 8.5" / (mm) 215.9
Working Pressure: (Psi) 15 / (Bar) 1
*Burst Pressure is 4 x Working Pressure
|
197.57 |
|
 |
4" ID Blue Silicone Molded Wet Exhaust Hump with 4 T-Bolt Clamp
This silicone and rubber hump hose provides the ultimate flexible connector for marine wet exhaust systems. The hump hose offers much greater tolerance to heat, misalignment, engine movement, and vibration, with significant savings in cost, parts, labor, and space.
Construction:
Tube & Cover: VHT blue silicone
Color: Blue
Reinforcement: EPDM Silicone Rubber
Temperature Range: 350°F (177°C)
Specifications:
Inner Diameter: (inch) 4" / (mm) 101.6
Outer Diameter: (inch) 4.5" / (mm) 114.3
Working Pressure: (Psi) 15 / (Bar) 1
*Burst Pressure is 4 x Working Pressure
|
128.29 |
|
 |
6" ID 45-Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt Clamps
Trident silicone-blend rubber marine wet exhaust connections. They are molded in very high-temperature blue silicone EPDM blended rubber with a smooth bore and cover; except elbows of 6" I.D. or larger have molded reinforcing ribs on the outside.
Features:
Four stainless steel t-bolt clamps
Very high temp silicone/EDPM blend rubber - molded
This elbow has excellent resistance to ozone, salt water, diesel fumes, splash, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1) exhaust standards
Blue very high-temperature silicone blended with EDPM rubber at 350°F (177°C) max continuous
Construction:
Color: Blue
Reinforcement: Reinforcing ribs on 6” I.D. and above
Temperature Range: up to 350°F (177°C)
Specifications:
Inner Diameter: (inch) 6” / 152.4 mm
A: (inch) 2” / (mm) 5.1
B: (inch) 2” / (mm) 5.1
C: (inch) 6.5” / (mm) 16.5
R: (inch) 1.75” / (mm) 4.5
W: (inch) 0.25" / (mm) 6.4
Elbow Degree: 45 degrees
|
177.77 |
|
 |
8" ID 45-Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt Clamps
Trident silicone-blend rubber marine wet exhaust connections. They are molded in very high-temperature blue silicone EPDM blended rubber with a smooth bore and cover; except elbows of 6" I.D. or larger have molded reinforcing ribs on the outside.
Features:
Four stainless steel t-bolt clamps
Very high temp silicone/EDPM blend rubber - molded
This elbow has excellent resistance to ozone, salt water, diesel fumes, splash, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1) exhaust standards
Blue very high-temperature silicone blended with EDPM rubber at 350°F (177°C) max continuous
Construction:
Color: Blue
Reinforcement: Reinforcing ribs on 6” I.D. and above
Temperature Range: up to 350°F (177°C)
Specifications:
Inner Diameter: (inch) 8” / 203.2 mm
A: (inch) 2.25” / (mm) 5.7
B: (inch) 2.25” / (mm) 5.7
C: (inch) 8.5” / (mm) 21
R: (inch) 2.12” / (mm) 5.4
W: (inch) 0.37" / (mm) 9.4
Elbow Degree: 45 degrees
|
304.79 |
|
 |
3" ID 90-Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt Clamps
Trident silicone-blend rubber marine wet exhaust connections. They are molded in very high-temperature blue silicone EPDM blended rubber with a smooth bore and cover.
Features:
Four stainless steel t-bolt clamps
Very high temp silicone/EDPM blend rubber - molded
This elbow has excellent resistance to ozone, salt water, diesel fumes, splash, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1) exhaust standards
Blue very high-temperature silicone blended with EDPM rubber at 350°F (177°C) max continuous
Construction:
Color: Blue
Temperature Range: up to 350°F (177°C)
Specifications:
Inner Diameter: (inch) 3” / (mm) 76.2
A: (inch) 5.25” / (mm) 133
B: (inch) 5.25” / (mm) 133
C: (inch) 1.75” / (mm) 44.4
D: (inch) 1.50" / (mm) 38.1
R: (inch) 2” / (mm) 50.8
W: (inch) 0.25" / (mm) 6.4
Elbow Degree: 90 degrees
|
124.21 |
|
 |
6" ID 90-Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt Clamps
Trident silicone-blend rubber marine wet exhaust connections. They are molded in very high-temperature blue silicone EPDM blended rubber with a smooth bore and cover; except elbows of 6" I.D. or larger have molded reinforcing ribs on the outside.
Features:
Four stainless steel t-bolt clamps
Very high temp silicone/EDPM blend rubber - molded
This elbow has excellent resistance to ozone, salt water, diesel fumes, splash, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1) exhaust standards
Blue very high-temperature silicone blended with EDPM rubber at 350°F (177°C) max continuous
Construction:
Color: Blue
Reinforcement: Reinforcing ribs on 6” I.D. and above
Temperature Range: up to 350°F (177°C)
Specifications:
Inner Diameter: (inch) 6” / 152.4 mm
A: (inch) 7” / (mm) 178
B: (inch) 7” / (mm) 178
C: (inch) 2.25” / (mm) 57.2
D: (inch) 2" / (mm) 57.2
R: (inch) 1.75” / (mm) 44.5
W: (inch) 0.25" / (mm) 6.4
Elbow Degree: 90 degrees
|
234.49 |
|
 |
4" ID 90-Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt Clamps
Trident silicone-blend rubber marine wet exhaust connections. They are molded in very high-temperature blue silicone EPDM blended rubber with a smooth bore and cover.
Features:
Four stainless steel t-bolt clamps
Very high temp silicone/EDPM blend rubber - molded
This elbow has excellent resistance to ozone, salt water, diesel fumes, splash, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1) exhaust standards
Blue very high-temperature silicone blended with EDPM rubber at 350°F (177°C) max continuous
Construction:
Color: Blue
Temperature Range: up to 350°F (177°C)
Specifications:
Inner Diameter: (inch) 4” / (mm) 101.6
A: (inch) 5.75” / (mm) 146
B: (inch) 5.75” / (mm) 146
C: (inch) 1.75” / (mm) 44.4
D: (inch) 1.50" / (mm) 38.1
R: (inch) 2” / (mm) 50.8
W: (inch) 0.25" / (mm) 6.4
Elbow Degree: 90 degrees
|
171.19 |
|
 |
3" ID 45-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt Clamps
Trident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.
Features:
Four stainless steel clamps are included
This elbow has excellent resistance to ozone, salt water, diesel fumes and splashes, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards)
Black high-temp EDPM rubber
Construction:
Color: Black
Reinforcement: Reinforcing ribs on 6” I.D. and above
Temperature Range: up to 250°F (121°C)
Specifications:
Inner Diameter: (inch) 3” / (mm) 76.2
Outer Diamter: (inch) 3.5" / (mm) 88.9
A: (inch) 1.5” / (mm) 38.1
B: (inch) 1.5” / (mm) 38.1
C: (inch) 5.5” / (mm) 139.7
W: (inch) 0.25” / (mm) 6.35
Elbow Degree: 45 degrees
Weight: (Lb/Ea) 0.6 / (Kg/Ea) 0.27
|
78.28 |
|
 |
3-1/2" ID 45-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt Clamps
Trident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.
Features:
Four stainless steel clamps are included
This elbow has excellent resistance to ozone, salt water, diesel fumes and splashes, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards)
Black high-temp EDPM rubber
Construction:
Color: Black
Reinforcement: Reinforcing ribs on 6” I.D. and above
Temperature Range: up to 250°F (121°C)
Specifications:
Inner Diameter: (inch) 3.5” / (mm) 88.9
Outer Diamter: (inch) 4.0" / (mm) 101.6
A: (inch) 1.5” / (mm) 38.1
B: (inch) 1.5” / (mm) 38.1
C: (inch) 5.5” / (mm) 139.7
W: (inch) 0.25” / (mm) 6.35
Elbow Degree: 45 degrees
Weight: (Lb/Ea) 0.7 / (Kg/Ea) 0.32
|
88.12 |
|
 |
4" ID 45-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt Clamps
Trident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.
Features:
Four stainless steel clamps are included
This elbow has excellent resistance to ozone, salt water, diesel fumes and splashes, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards)
Black high-temp EDPM rubber
Construction:
Color: Black
Reinforcement: Reinforcing ribs on 6” I.D. and above
Temperature Range: up to 250°F (121°C)
Specifications:
Inner Diameter: (inch) 4” / (mm) 101.6
Outer Diamter: (inch) 4.5" / (mm) 114.3
A: (inch) 1.5” / (mm) 38.1
B: (inch) 1.5” / (mm) 38.1
C: (inch) 5.5” / (mm) 139.7
W: (inch) 0.25” / (mm) 6.35
Elbow Degree: 45 degrees
Weight: (Lb/Ea) 0.95 / (Kg/Ea) 0.43
|
83.53 |
|
 |
5" ID 45-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt Clamps
Trident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.
Features:
Four stainless steel clamps are included
This elbow has excellent resistance to ozone, salt water, diesel fumes and splashes, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards)
Black high-temp EDPM rubber
Construction:
Color: Black
Reinforcement: Reinforcing ribs on 6” I.D. and above
Temperature Range: up to 250°F (121°C)
Specifications:
Inner Diameter: (inch) 5” / (mm) 127
Outer Diamter: (inch) 5.5" / (mm) 139.7
A: (inch) 1.62” / (mm) 48.1
B: (inch) 1.62” / (mm) 48.1
C: (inch) 5.75” / (mm) 146
W: (inch) 0.25” / (mm) 6.35
Elbow Degree: 45 degrees
Weight: (Lb/Ea) 1.05 / (Kg/Ea) 0.478
|
103.00 |
|
 |
6" ID 90-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt Clamps
Trident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.
Features:
Four stainless steel clamps are included
This elbow has excellent resistance to ozone, salt water, diesel fumes and splashes, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards)
Black high-temp EDPM rubber
Construction:
Color: Black
Reinforcement: Reinforcing ribs on 6” I.D. and above
Temperature Range: up to 250°F (121°C)
Specifications:
Inner Diameter: (inch) 6” / (mm) 152.4
A: (inch) 7" / (mm) 178
B: (inch) 7” / (mm) 178
C: (inch) 2.25” / (mm) 57
D: (inch) 2.25” / (mm) 57
R: (inch) 1.75” / (mm) 44.4
W: (inch) 0.25” / (mm) 6.4
Elbow Degree: 90 degrees
|
109.61 |
|
