StructureScan 3D Thru Hull with L/H Chirp and StructureScan 3D StructureScan 3D thru hull transducer with Low and High CHIRP. Single transducer for flat to hull mounting or fits deadrises up to 5 degrees with fairing block. StructureScan 3D connectors connect to a StructureScan 3D module, CHIRP connector includes XID in the 9 pin connector and connects directly to the MFD.

StructureScan 3D Thru-Hull Transducer Fairing Block Only Navico's high-performance fairing block gives you greater StructureScan performance at speed.

StructureScan 3D® Thru-Hull Transducer with Medium/High CHIRP StructureScan 3D thru-hull transducer with Medium and High CHIRP. Single transducer for flat to hull mounting or fits deadrises up to 5 degrees with fairing block. StructureScan 3D connectors connect to a StructureScan 3D module, CHIRP connector includes XID in the 9 pin connector and connects directly to the MFD.

xSonic Bronze 12° HDI Transducer Thru Hull 50/200 455/800 with 9 pin connector and 10M Cable Bronze Hybrid Dual Imaging™ (HDI) tilted element thru hull transducer Provides 50/200kHz traditional frequencies PLUS 455/800kHz Down Scan Imaging plus temperature 12 degree tilt 10M Cable Beam Width: 50kHz @ 45°, 200kHz @ 11° 455kHz- Fore to aft 2.8°, Port to starboard 56°, 800kHz Fore to aft 1.6° Port to starboard 32°

xSonic Bronze 0° HDI Transducer Thru Hull 50/200 455/800 with 9 pin connector and 10M Cable Bronze Hybrid Dual Imaging™ (HDI) tilted element thru hull transducer Provides 50/200kHz traditional frequencies PLUS 455/800kHz Down Scan Imaging plus temperature 0 degree tilt 10M Cable Beam Width: 50kHz @ 45°, 200kHz @ 11° 455kHz- Fore to aft 2.8°, Port to starboard 56°, 800kHz Fore to aft 1.6° Port to starboard 32°

Thru-Hull Fittings

Temperature Sensor Thru-Hull Replaces EP-80 Pre-configured as Water Temperature Can be reconfigured* to output the following temperature types: Outside Inside Engine Room Cabin Live Well Bait Well Refrigeration Heating System *can only be controlled/configured on Navico MFDs

Groco Th-3000-L Thru Hull 3" Less Nut  Groco- Thru Hull 3" Less Nut

Double Barb Inline Scupper Check Valve - 3/4" - Black A great solution to provide a scupper check valve in the drain line.  Allows use of standard thru-hull fittings in the cockpit and on the hull exterior.  Features: Prevents Backwash Chemical Resistant Materials Thermo-Plastic Flapper

Double Barb Inline Scupper Check Valve - 1-1/8" - Black A great solution to provide a scupper check valve in the drain line.  Allows use of standard thru-hull fittings in the cockpit and on the hull exterior.  Features: Prevents Backwash Chemical Resistant Materials Thermo-Plastic Flapper

Double Barb Inline Scupper Check Valve - 1-1/2" - Black A great solution to provide a scupper check valve in the drain line.  Allows use of standard thru-hull fittings in the cockpit and on the hull exterior.  Features: Prevents Backwash Chemical Resistant Materials Thermo-Plastic Flapper

SS75H Stainless Steel Thru-Hull 20° Tilt 600W Chirp - High Frequency High-Frequency CHIRP Transducer with Temperature with Stainless Steel Thru-Hull. Features: Function: Depth,Temperature Frequency: 130-210 kHz Mount Style: Thru-Hull, Flush, 20 Degree Tilt Housing Material: Stainless Steel Install Type: Thru-Hull Power Rating: 600W This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

StructureScan 3D® Stainless Steel Thru-Hull Transducer - Single Lowrance and Simrad Yachting announce the release of new thru-hull StuctureScan 3D® Stainless Steel transducer for the StructureScan 3D® Sonar Imaging product line, providing more range and greater resolution. As with transom-mount StructureScan 3D® transducers, the thru-hull Stainless Steel version deliver extreme target detail, bottom discrimination plus bait and game fish separation at depths to 300'(92M) and a wider range of 600'(183M) Left & Right coverage. These Stainless Steel StructureScan 3D® transducers from Airmar® are available only from Navico exclusively for StructureScan 3D® systems. These sturdy, Stainless Steel StructureScan 3D® transducers are resistant to the electrical forces in the environment where it will be used. Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan plus DownScan Imaging™ & 3D Imaging technology; an optional high-performance fairing is avaliable (000-13581-001) give you greater StructureScan performance at speeds; and feature a 30'(9M) transducer cable. For boats with steep or variable deadrise hull angles, consumers must purchase the StructureScan® 3D Stainless Steel Thru-Hull Pair (000-13560-001).

StructureScan 3D® Stainless Steel Thru-Hull Transducer - Pair The Dual thru-hull StuctureScan 3D® Stainless Steel transducer for the StructureScan 3D® Sonar Imaging product line, providing more range and greater resolution. These transducers are designed for boats with steep or variable deadrise hull angles, for seamless display of SideScan and DownScan and 3D Imaging. As with transom-mount StructureScan 3D® transducer, the Dual thru-hull Stainless Steel version deliver extreme target detail, bottom discrimination, plus bait and game fish separation at depths to 300'(92M) and a wider range of 600'(183M) Left & Right of coverage. These Dual thru-hull Stainless Steel StructureScan 3D® transducers from Airmar® are available only from Navico exclusively for StructureScan 3D® systems. These sturdy, Dual thru-hull Stainless Steel StructureScan 3D® transducers are resistant to the electrical forces in the environment where it will be used. Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan, DownScan Imaging™ and 3D Imaging technology; an optional high-performance fairing is avaliable (000-13581-001) give you greater StructureScan performance at speed; and feature a 30'(9M) transducer cable. **Note if you require a longer cable you will need 2 each 000-12752-001 transducer extension cable**

B285HW CHIRP Bronze Transducer with FB 10-Pin High-Frequency, Wide-Beam CHIRP Transducer with Temperature - Bronze Thru-Hull with High-Speed Fairing Block. Features: Power: 1kW Function: Depth, Temperature Frequency: 150-250 kHz Mount Style: Thru-Hull Housing Material: Bronze