|
Temperature Sensor Thru-Hull
Replaces EP-80 Pre-configured as Water Temperature Can be reconfigured* to
output the following temperature types:
Outside
Inside
Engine Room
Cabin
Live Well
Bait Well
Refrigeration
Heating System
*can only be controlled/configured on Navico MFDs
|
90.13 |
|
|
DX900+ Multilog Smart™ Electromagnetic Speed Sensor Thru‑Hull NMEA 0183
Say goodbye to the paddlewheel and hello to Smart® Sensor technology. The DX900+ uses electromagnetic technology to accurately measure dual-axis speed through water plus immediately calculate leeway travel. Paddlewheels need cleaning and only measure speed longitudinally. The DX900+ measures water flow at 360° and will immediately deliver the leeway data to your instrument. There are no moving parts to clean or maintain. Performance sailors, racers, or long-distance cruisers will immediately see the benefits of the accuracy and reliability of the DX900+.
The DX900+ is available as a Speed and Water-temperature sensor.
Features:
Electromagnetic dual-axis speed, and water temperature with no moving parts
Measures transverse and longitudinal speed that instantaneously calculates leeway angle and speed through water with no latency
Connects and shares data wirelessly with AIRMAR’s CAST™ app. Perfect for displaying performance data on phones or tablets, plus makes calibration fast and easy.
Outputs heel and trim
The sensing pins in contact with the water are made from very high-quality alloy, allowing very stable measurements and high resistance to corrosion. (Do not use any bottom paint on exposed sensing pins.)
Thru-hull, low-profile housing with water valve
Retractable insert for safe storage
Available in a plastic (P717V) or stainless steel (SS617V) housing
Retrofits to existing P617V housing
Specifications:
Weight (sensor, box, and cable):
Plastic—1 kg (2.3 lb.)
Stainless steel—2 kg (4.4 lb.)
Hull Material: Plastic housing for fiberglass or metal hull/Stainless steel housing compatible with all hull materials
Deadrise Angle: Up to 22°
Hole Diameter: Fiberglass or wood—51 mm or 2", Stainless steel housing in metal hull—57 mm or 2-1/4"
Transverse Speed Range: ±6 knots
Longitudinal Speed Range: ±60 knots
Accuracy of Transverse and Longitudinal Speed: ±0.1 knots for speeds under 10 knots, ±1% for speeds above 10 knots
Display Resolution: 0.01 knots
Outputs: NMEA 0183—speed and temperature
Configurable Data Update Rate: Up to 10 Hz
Operating Temperature Range: -15°C to 55°C (5°F to 131°F)
Water Temperature Accuracy: +0.5°C (+1.0°F)
Power: Supply Voltage: 9 to 16 VDC
Average Power Consumption: NMEA 0183 - 2.5 W
Standard Cable Length: NMEA 0183 - 6M (20')
Includes: Blanking plug
CE Compliant: Yes to IEC60945
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
887.39 |
|
|
B285M Medium-Frequency CHIRP Transducer with Temperature - Bronze Thru-Hull with High Speed Fairing Block
Features:
Frequency: Chirp 85 - 135 kHz
Power Rating: 1 KW
Connector: 10 Pin
Fairing Block: High Speed Fairing Block Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1386.67 |
|
|
xSonic B150M Thru-Hull Transducer - 9-Pin 10M Cable - 0°
As CHIRP continues to redefine recreational fishing, AIRMAR has expanded the lineup of broadband transducers to satisfy the growing demand for this game changing technology. The B150M economical CHIRP transducers designed for offshore fishing and freshwater anglers. Operating at a frequency range of 95-155 kHz, these transducers reveal fish in shallow, murky waters at medium depths (up to 2,500 feet*) along with ultra-clear target resolution.
*Depths vary depending on target strength and sea conditions
A tilted element model in the CHIRP Thru-Hull product line, the B150M CHIRPS across the following bandwidth: M Model - Medium Frequency 95-155 kHz
Features:
Depth and water temperature sensor
300W
Bronze Thru Hull
0° tilt
Ideal for inshore or coastal fishing in shallow to medium depths
Freshwater anglers will see fish holding close to structures and suspended fish
Track bottom at higher boat speeds
More coverage under your boat delivers wider archesand 26° to 17° beamwidths
Cover the medium frequency range-CHIRPs from 95-155kHz to provide 60 kHz of total bandwidth from one transducer
Hull Type: Fiberglass, wood
1 internal ceramic
|
368.44 |
|
|
StructureScan 3D Thru-Hull Transducer Fairing Block Only
Navico's high-performance fairing block gives you greater StructureScan performance at speed.
|
81.92 |
|
|
StructureScan 3D® Thru-Hull Transducer with Medium/High CHIRP
StructureScan 3D thru-hull transducer with Medium and High CHIRP. Single transducer for flat to hull mounting or fits deadrises up to 5 degrees with fairing block.
StructureScan 3D connectors connect to a StructureScan 3D module, CHIRP connector includes XID in the 9 pin connector and connects directly to the MFD.
|
1362.08 |
|
|
StructureScan 3D Thru Hull with L/H Chirp and StructureScan 3D
StructureScan 3D thru hull transducer with Low and High CHIRP. Single transducer for flat to hull mounting or fits deadrises up to 5 degrees with fairing block.
StructureScan 3D connectors connect to a StructureScan 3D module, CHIRP connector includes XID in the 9 pin connector and connects directly to the MFD.
|
1362.08 |
|
|
B260 Bronze Thru Hull
The B260 will enhance fish detection on virtually all of today's
fish finders. High-performance has been redefined with its
Broadband Ceramic Technology. The narrow, 6 degree beam 200 kHz
ceramic will give you excellent resolution and crisp image detail
needed for bottom fishing. The B260's low ringing is perfect for
finding fish holding tight to the bottom and other structure.
The seven-element 50 kHz array has a wider 19 degree beam for
deeper blue-water fishing. The outcome at both frequencies
is excellent resolution and crisp image detail where it's needed
most.
Compatible with Lowrance HDS Series and Simrad NSE Series Multifunction Display Units.
Features
Depth/Temp
50/200 kHz
1 kW RMS
High-performance
Bronze Thru Hull
7 pin blue connector
Includes High Speed Fairing Block
|
1528.94 |
|
|
GT21-TH
Perfect for coastal and offshore fishermen who want traditional sonar and CHIRP ClearVü scanning sonar with a stainless steel stem, this thru-hull mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat.
The CHIRP ClearVü element has a power rating of 500 W and operating frequencies of 260/455 kHz. The traditional sonar has a power rating of 600 W and operating frequencies of 50/200 kHz. It includes a built-in fast-response temperature sensor. For hull deadrises less than 25 degrees.
GT21-TH includes an 8-pin transducer with stainless steel stem, fairing block, isolation plate and bushings, mounting hardware and installation instructions. Follow the instructions carefully to avoid damaging your boat.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
427.49 |
|
|
B60 Thru-Hull Transducer 20° Tilt 9-Pin for Navico xSonic
The B60 is a 600W, 50/200 kHz transducer that integrates Airmar’s popular, Tilted Element™ feature. This Tilted Element transducer has the ceramic element fixed at a 20° angle within the housing. When the transducer is installed almost flush with the hull, the tilt of the element corrects for the hull deadrise angle. Orienting the beam directly down ensures maximum echo returns to the transducer for more accurate depth readings.
Features:
Depth and fast-response water temperature sensing
600 W of power
Dual-frequency element:
50 kHz with a wide 45° beamwidth for depth performance to 353 m (1200')
200 kHz with a 12° beamwidth for depth performance to 206 m (700')
Perfect for center-console or trailered boats
Low-profile bronze housing extends only 5 mm (3/16") outside the hull
No effect on your boat’s running performance
Bronze housing for fiberglass or wood hull
Also available in a stainless steel housing (SS60) for use with all hull materials
Specifications:
Power Rating: 600 W
Max Deadrise Angle: 24°
Housing: Bronze
Functions: Depth, Temperature
Hull Material: Fiberglass or wood
Max Vessel LOA: Up to 8 m (26')
Hole Size: 60 mm (2-3/8")
Usable Shaft Length: 68.5 mm (2.70")
Acoustic Window: Urethane
Common Use: Leisure/Yachting, Fishing
Conventional Beam: 45°/12°
Max Deadrise: Up to 24°
Max Depth: Low frequency- 366 m (1200'), High frequency- 206 m (700')
Mounting Style: Tilted Element Thru-Hull
Retractable housing: No
Single or Dual Frequency: Conventional Dual Frequency
Tilted Element: Yes
Weight: 1.4 kg (3 lbs.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
348.71 |
|
|
DT812PV-235-N2 - 235kHz - Plastic Thru Hull Smart Sensor - 12° Tilt - NMEA 2000 - 6M Cable
Airmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference. The broadband ceramic delivers depth readings to 183 m (600'), as well as accurate shallow-water readings in as little as 500 mm (1.6'). Available in fixed 0°, 12°, or 20° tilt, the DT800 is perfect for power and sailboat applications. It is sold with a choice of rugged housings— plastic, bronze, or stainless steel—to accommodate any vessel type or hull material. These low-profile housings do not affect hull performance and will provide accurate readings at high speeds.
Airmar's Smart™ Sensors have embedded microelectronics—the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible device or display. Because the ceramic is tilted inside the housing, the transducer beam is oriented straight down, resulting in strong bottom echo returns and accurate depth readings. The retractable housing with a self-closing valve reduces water flow into the vessel when the transducer is removed for cleaning.
Smart™ Sensor Features
Broadband ceramic available with 0°, 12° and 20° tilt options
Enhanced depth performance
Maximum Depth Range: 180M (594’)
Minimum range 0.5M (1.6’)
Urethane face provides better sensitivity
Excellent high-speed performance
Fixed 12° tilt for 8° to 15° deadrise
NMEA 2000 output
100 W RMS power
Frequency: 235 kHz
Cone: 12°
All models have depth and temperature
235 kHz eliminates interference with fishfinders
Retractable insert provides ease of serviceability
Usable Shaft Length: 57mm (2.25”)
6M(19.8”) NMEA 2000® devicenet cable and connector
51mm (2”) housing
Blanking plug included
Accommodates maximum hull thicknesses 54 mm (2 1/8”)
Accommodates minimum hull thicknesses 6.3 mm (0.25”)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
341.88 |
|
|
SS75 High Chirp 12 Degree Bronze Thru-Hull xSonic Transducer
Airmar’s low-profile, Chirp-ready transducer models are the perfect addition to smaller boats, such as center consoles. The high-frequency band has a narrow beamwidth, excellent for pinpointing fish holding tight to wrecks, reefs, and other structures. High frequency also shows amazing target separation on baitfish and schooling gamefish. The SS75H transducer, operating at 130 to 210 kHz, delivers up to 80 kHz of total bandwidth in just one installation for outstanding bottom detail and fish-target resolution.
This Tilted Element™ transducer has the element fixed at a 12-degree angle within the housing. Because the transducer is installed almost flush with the hull, the tilt corrects for the hull deadrise. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.
Features:
Depth and fast-response water-temperature sensing
600 W of power with a maximum depth of 214 m (700')
High frequency (130 to 210 kHz)
15- 9 degree beamwidth
High frequency delivers great shallow-water performance, bottom detail, and clear fish-target returns
Low-profile, thru-hull housing provides good display resolution at speed when installed properly
Recommended for stepped, planning, or displacement hull
Stainless steel housing for use in all hull materials
Patented Xducer ID® technology
Specifications:
Brand: Airmar Technology
Acoustic Window: Urethane
Cable-Length: 10 m (33')
Common Use: Fishing, Commercial Fishing
Connector: Simrad 9-Pin, Lowrance 9-Pin, Navico 9-Pin
Country of Origin: USA
Cross Reference: 000-13912-001
Deadrise Range: 8-15 degrees
Display Connector: 9N
Frequency Band: High
Functions: Depth, Temperature
High Frequency: 130-210 kHz
High Frequency Beamwidth: 15-9 degrees
Hole Size: Fiberglass or wood hull—70 mm or 2-13/16", Metal hull—79 mm or 3-1/8"
Hull Material: Compatible w/ all hull materials
Material: Stainless Steel
Max Deadrise: Up to 24 degrees
Max Deadrise Angle: 24 degrees
Max Depth: 214 m (700')
Max Vessel LOA: Up to 8 m (26')
Mix and Match Series: 12-Pin Chirp
Mounting Style: Tilted Element Thru-Hull
Power Rating: 600 W
Retractable housing: No
Sensor Connector: MMC
Single or Dual Frequency: CHIRP-Ready Single-Band
Tilt Angle: 12 degrees
Tilted Element: Yes
Weight: 1.4 kg (3 lbs.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
861.48 |
|
|
xSonic SS60 Stainless Steel 20° Tilt Thru-Hull Depth/Temp Transducer - 9-Pin - 10M Cable
The SS60 is a stainless steel, thru-hull, tilted, dual-frequency, depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.
Features:
Depth/Temperature - Calculates how deep the water is, so that you can avoid running aground, whilst also incorporating a temperature sensor for accurate water temperature readings
Easy To Install
Dual Frequency - Works at 50 kHz and 200 kHz for good target detail in shallow water and excellent bottom tracking in deep water
Highly Accurate - Provides extremely accurate data
20° Tilt - The 20° tilt is ideal for boats with a 16° to 24° hull deadrise
Low Profile - The low profile housing minimizes drag with just 5mm extending outside of the hull
Plug & Play Connection - Easily connect to NSSevo3, Lowrance HDS G3
|
403.61 |
|
|
B45 Bronze Thru-Hull with Fairing Block - 50/200 kHz - 600W - 9-Pin Connector (xSonic)
The B45 is Airmar’s smallest and most economical, dual-frequency, bronze, stem transducer. It features a single, 50/200 kHz ceramic element. The included fairing streamlines the transducer and increases the performance—even at higher speeds.
Features
The depth and fast-response water-temperature sensing
600 W of power
Dual-frequency element:
50 kHz with a wide 45° beamwidth for depth performance to 353 m (1200')
200 kHz with a 12° beamwidth for depth performance to 206 m (700')
Excellent performance and sensitivity in a small housing
Bronze housing with High-performance Fairing for optimal performance at speed
Specifications
Acoustic Window: Urethane
Cable-Length: 10 m (33')
Common Use: Cruising/Racing Sailboats, Leisure/Yachting, Fishing
Connector: Simrad 9-Pin, Lowrance 9-Pin, Navico 9-Pin
Conventional Beam: 45°/12°
Country of Origin: USA
Cross Reference: 000-13946-001
Deadrise Range: Up to 28° with fairing
Display Connector: 9N
Frequency Band: 50/200 kHz
Hole Size: 22 mm (7/8")
Housing Material: Bronze
Hull Material: Fiberglass or wood
Max Deadrise: Up to 26° with fairing
Max Deadrise Angle: 26°
Max Depth: Low frequency- 366 m (1200'), High frequency- 206 m (700')
Max Vessel LOA: Up to 9 m (30')
Mix and Match Series: 5-Pin 600 Watt
Mounting Style: Thru-Hull with Fairing
Power Rating: 600 W
Sensor Connector: MM
Single or Dual Frequency: Conventional Dual Frequency
Tilted Element: No
Transducer Functions: Depth, Temperature
Usable Shaft Length: 92 mm (3.62")
Weight: 2.5 kg (5.5 lb.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
336.82 |
|
|
B75H 20° Bronze Thru-Hull CHIRP xSonic 9-Pin
The B75H is a bronze, thru-hull, tilted, high-frequency (130-210kHz), depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.
Features:
CHIRP transducers enable bottom detection with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures
Depth/Temperature - Calculates how deep the water is, so that you can avoid running aground, whilst also incorporating a temperature sensor for accurate water temperature readings
Easy To Install
High Frequency - CHIRP range is 130kHz-210kHz for good target detail in shallow water and excellent bottom tracking in deep water
Highly Accurate - Provides extremely accurate data
20° Tilt - The 20° tilt is ideal for boats with a 16° to 24° hull deadrise
Low Profile - The low profile housing minimizes drag with just 5mm extending outside of the hull
Plug & Play Connection - Easily connect to NSS, NSE, NSO or Lowrance
|
658.62 |
|