|
SS75H Stainless Steel Thru-Hull 20° Tilt 600W Chirp - High Frequency
High-Frequency CHIRP Transducer with Temperature with Stainless Steel Thru-Hull.
Features:
Function: Depth,Temperature
Frequency: 130-210 kHz
Mount Style: Thru-Hull, Flush, 20 Degree Tilt
Housing Material: Stainless Steel
Install Type: Thru-Hull
Power Rating: 600W
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
800.00 |
|
|
SS60 Stainless Steel Thru-Hull 20° Tilt, 50/200, 10-Pin
Stainless Steel Thru-Hull Transducer with Temp, 600W (10-Pin), 20° Tilted Element. If a thru-hull flush-style transducer is called for, the Tilted Element SS60-SLTD/20 will accommodate a deadrise angle between 16° and 24°. This transducer compensates for deadrise by angling the element inside the housing. The transducer is labeled with an arrow on top of the housing that should point towards the keel, whether it is installed to port or starboard. This ensures that the tilted element within the housing is given the correct orientation.
Features:
600 Watts
50/200 kHz
45/12 degree Beam Angles
Stainless Steel Thru-Hull with Temperature
30' Cable with 10-Pin Connector
|
426.67 |
|
|
B75H Bronze Chirp Thru Hull 20° Tilt - 600W
Requires Mix and Match Cable
Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.
Features:
Depth & fast-response water-temperature sensor
High—CHIRPS from 130 kHz to 210 kHz, 15° to 9° beamwidth
20° tilted versions, 600W
80 kHz of total bandwidth from one transducer
Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth
Bronze transducer housing
Boat Size: Up to 8 m (25’)
Hull Type: Fiberglass or wood
Exclusive Xducer ID® technology
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
738.41 |
|
|
B75M Bronze Chirp Thru Hull 20° Tilt - 600W
Requires Mix and Match Cable
Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 70 kHz of total bandwidth in just one installation, saving customers time and money.
Features:
Depth & fast-response water-temperature sensor
Medium—CHIRPS from 80 kHz to 130 kHz, 24° to 16° beamwidth
20° tilted version, 600W
50 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth
Bronze transducer housing
Boat Size: Up to 8 m (25’)
Hull Type: Fiberglass or wood
Exclusive Xducer ID® technology
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
744.89 |
|
|
SS164 Stainless Steel Thru-Hull - 0° Tilted Element - 1KW for CP370 Sounder
Step up to a 1 kW—without a fairing! Airmar’s innovative Tilted Element™ technology to a higher power. The 1 kW, flush-mount, tilted element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot accomodate a high-performance fairing. The flush-mounted, stainless steel housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks. The ceramic arrays are tilted inside the housing providing the perfect vertical beam with maximum energy on what is directly below the boat.
Features:
Depth and fast-response water-temperature sensor
1 kW power for performance to 500 m (1640'), 50 kHz with a wide 22° beam, 200 kHz with a 6° beam
Interfaces to any 600 W or 1 kW echosounder
Engineered for center-console and trailered boats
Low-profile protrusion - less than 6.35 mm (0.25") outside your hull
Fixed 0° tilted version for 0° to 7° hull deadrise
No affect on boats running performance
Stainless steel transducer housing for use on all hull materials
Recommended boat size: up to 11 m (35')
Exclusive Xducer ID® technology
|
1344.98 |
|
|
SS75M Stainless Steel Thru-Hull Chirp Transducer - 20° Tilt - Med Frequency
Features:
Frequency: Chirp 80 - 130 kHz
Power Rating: 600 Watts
Connector: 10 Pin
Tilt: 20 Degree
Deadrise of Hull: 16-24 Degrees
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
800.00 |
|
|
SS75M Stainless Steel Thru-Hull Chirp Transducer - 12° Tilt - Med Frequency
Features:
Frequency: Chirp 80 - 130 kHz
Power Rating: 600 Watts
Connector: 10 Pin
Tilt: 12 Degree
Deadrise of Hull: 8-15 Degrees
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
800.00 |
|
|
556TID-LTD/12 Stainless Steel Thru-Hull 1kW - 12° Tilted
Furuno's Stainless Steel Thru-Hull Transducer, 1 kW (10 Pin), 12-degree Tilted Element.
Airmar SS164 Housing Style Transducer.
If a thru-hull flush-style, stainless steel transducer is called for, the 12-Degree Tilted Element 556TID-LTD/12 will accommodate a deadrise angle between 8° and 15°. This transducer compensates for deadrise by angling the element inside the housing.
The transducer is labeled with an arrow on top of the housing that should point towards the keel, whether it is installed to port or starboard. This ensures that the tilted element within the housing is given the correct orientation.
Features:
1kW 50/200 kHz
20/6 degree Beam Angles
Stainless Steel Thru Hull with Temperature
30 Foot Cable with 10-Pin Connector
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1066.67 |
|
|
B175HW Chirp Bronze Thru-Hull 20° Tilt 1kW - 10-Pin Connector
High-Frequency, Wide-Beam CHIRP Transducer with Temperature with Bronze Thru-Hull with 20° Tilt.
Features:
Power: 1kW
Function: Depth,Temperature
Frequency: 150-250 kHz
Mount Style: Thru-Hull, Flush, 20 Degree Tilt
Housing Material: Bronze
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1493.33 |
|
|
B175M Bronze Thru-Hull 20° Tilt - Med Frequency
Features:
Frequency: Chirp 85-135 kHz
Power Rating: 1KW
Connector: 10 Pin
Tilt: 20 Degree
Deadrise of Hull: 16-24 Degrees
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1706.66 |
|
|
B75H Bronze Chirp Thru Hull 0° Tilt - 600W
Requires Mix and Match Cable
Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.
Features:
Depth & fast-response water-temperature sensor
High—CHIRPS from 130 kHz to 210 kHz, 15° to 9° beamwidth
0° tilted versions, 600w
80 kHz of total bandwidth from one transducer
Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth
Bronze transducer housing
Boat Size: Up to 8 m (25’)
Hull Type: Fiberglass or wood
Exclusive Xducer ID® technology
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
738.41 |
|
|
B75M Bronze Chirp Thru Hull 0° Tilt - 600W
Requires Mix and Match Cable
Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 70 kHz of total bandwidth in just one installation, saving customers time and money.
Features:
Depth & fast-response water-temperature sensor
Medium—CHIRPS from 80 kHz to 130 kHz, 24° to 16° beamwidth
0° tilted version, 600W
50 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth
Bronze transducer housing
Boat Size: Up to 8 m (25’)
Hull Type: Fiberglass or wood
Exclusive Xducer ID® technology
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
744.89 |
|
|
B75M Bronze Chirp Thru Hull 12° Tilt - 600W
Requires Mix and Match Cable
Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 70 kHz of total bandwidth in just one installation, saving customers time and money.
Features:
Depth & fast-response water-temperature sensor
Medium—CHIRPS from 80 kHz to 130 kHz, 24° to 16° beamwidth
12° tilted version, 600W
50 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth
Bronze transducer housing
Boat Size: Up to 8 m (25’)
Hull Type: Fiberglass or wood
Exclusive Xducer ID® technology
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
744.89 |
|
|
B175HW Bronze Thru Hull 20° Tilt - 1kW
Requires Mix and Match Cable
Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers
A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.
Features:
Depth & fast-response water-temperature sensor
20 degree tilted version, 1KW
High—CHIRPS from 150 kHz to 250 kHz
25° constant beamwidth
100 kHz of total bandwidth from one transducer
Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth
Boat Size: 8 m (25’) and above
Hull Type: Fiberglass or wood
Exclusive Xducer ID® technology
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1347.28 |
|
|
B175M Bronze Thru Hull 20° Tilt - 1kW
Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.
Requires Mix and Match Cable
Features:
Medium—CHIRPS from 85 kHz to 135 kHz, 24° to 16° beamwidth
20° tilted version, 1KW
50 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth
Depth & fast-response water-temperature sensor
Bronze transducer housing
Boat Size: Up to 11 m (36’)
Hull Type: Fiberglass or wood
Exclusive Xducer ID® technology
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1120.57 |
|