|
StructureScan 3D Thru-Hull Transducer Fairing Block Only
Navico's high-performance fairing block gives you greater StructureScan performance at speed.
|
81.92 |
|
|
StructureScan 3D® Thru-Hull Transducer with Medium/High CHIRP
StructureScan 3D thru-hull transducer with Medium and High CHIRP. Single transducer for flat to hull mounting or fits deadrises up to 5 degrees with fairing block.
StructureScan 3D connectors connect to a StructureScan 3D module, CHIRP connector includes XID in the 9 pin connector and connects directly to the MFD.
|
1362.08 |
|
|
StructureScan 3D Thru Hull with L/H Chirp and StructureScan 3D
StructureScan 3D thru hull transducer with Low and High CHIRP. Single transducer for flat to hull mounting or fits deadrises up to 5 degrees with fairing block.
StructureScan 3D connectors connect to a StructureScan 3D module, CHIRP connector includes XID in the 9 pin connector and connects directly to the MFD.
|
1362.08 |
|
|
B45 Bronze Thru-Hull with Fairing Block - 50/200 kHz - 600W - 9-Pin Connector (xSonic)
The B45 is Airmar’s smallest and most economical, dual-frequency, bronze, stem transducer. It features a single, 50/200 kHz ceramic element. The included fairing streamlines the transducer and increases the performance—even at higher speeds.
Features
The depth and fast-response water-temperature sensing
600 W of power
Dual-frequency element:
50 kHz with a wide 45° beamwidth for depth performance to 353 m (1200')
200 kHz with a 12° beamwidth for depth performance to 206 m (700')
Excellent performance and sensitivity in a small housing
Bronze housing with High-performance Fairing for optimal performance at speed
Specifications
Acoustic Window: Urethane
Cable-Length: 10 m (33')
Common Use: Cruising/Racing Sailboats, Leisure/Yachting, Fishing
Connector: Simrad 9-Pin, Lowrance 9-Pin, Navico 9-Pin
Conventional Beam: 45°/12°
Country of Origin: USA
Cross Reference: 000-13946-001
Deadrise Range: Up to 28° with fairing
Display Connector: 9N
Frequency Band: 50/200 kHz
Hole Size: 22 mm (7/8")
Housing Material: Bronze
Hull Material: Fiberglass or wood
Max Deadrise: Up to 26° with fairing
Max Deadrise Angle: 26°
Max Depth: Low frequency- 366 m (1200'), High frequency- 206 m (700')
Max Vessel LOA: Up to 9 m (30')
Mix and Match Series: 5-Pin 600 Watt
Mounting Style: Thru-Hull with Fairing
Power Rating: 600 W
Sensor Connector: MM
Single or Dual Frequency: Conventional Dual Frequency
Tilted Element: No
Transducer Functions: Depth, Temperature
Usable Shaft Length: 92 mm (3.62")
Weight: 2.5 kg (5.5 lb.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
336.82 |
|
|
TotalScan Thru Hull Single Fairing Block
Replacement fairing block for TotalScan thru hull transducers. Fits both TotalScan M/H and TotalScan L/H thru hull transducers.
|
99.23 |
|
|
B785C-M CHIRP Bronze Thru-Hull w/Fairing Block - 600W
Features:
Thru-hull bronze model with fairing
Same physical size as a B744V
600W power rating
Depth and fast-response water temperature sensor
Available only in the Medium frequency band (M : 80-130kHz) with bare wire cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
906.82 |
|
|
xSonic B150M Thru-Hull Transducer - 9-Pin 10M Cable - 0°
As CHIRP continues to redefine recreational fishing, AIRMAR has expanded the lineup of broadband transducers to satisfy the growing demand for this game changing technology. The B150M economical CHIRP transducers designed for offshore fishing and freshwater anglers. Operating at a frequency range of 95-155 kHz, these transducers reveal fish in shallow, murky waters at medium depths (up to 2,500 feet*) along with ultra-clear target resolution.
*Depths vary depending on target strength and sea conditions
A tilted element model in the CHIRP Thru-Hull product line, the B150M CHIRPS across the following bandwidth: M Model - Medium Frequency 95-155 kHz
Features:
Depth and water temperature sensor
300W
Bronze Thru Hull
0° tilt
Ideal for inshore or coastal fishing in shallow to medium depths
Freshwater anglers will see fish holding close to structures and suspended fish
Track bottom at higher boat speeds
More coverage under your boat delivers wider archesand 26° to 17° beamwidths
Cover the medium frequency range-CHIRPs from 95-155kHz to provide 60 kHz of total bandwidth from one transducer
Hull Type: Fiberglass, wood
1 internal ceramic
|
368.44 |
|
|
StructureScan 3D® Stainless Steel Thru-Hull Transducer - Pair
The Dual thru-hull StuctureScan 3D® Stainless Steel transducer for the StructureScan 3D® Sonar Imaging product line, providing more range and greater resolution.
These transducers are designed for boats with steep or variable deadrise hull angles, for seamless display of SideScan and DownScan and 3D Imaging.
As with transom-mount StructureScan 3D® transducer, the Dual thru-hull Stainless Steel version deliver extreme target detail, bottom discrimination, plus bait and game fish separation at depths to 300'(92M) and a wider range of 600'(183M) Left & Right of coverage.
These Dual thru-hull Stainless Steel StructureScan 3D® transducers from Airmar® are available only from Navico exclusively for StructureScan 3D® systems. These sturdy, Dual thru-hull Stainless Steel StructureScan 3D® transducers are resistant to the electrical forces in the environment where it will be used.
Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan, DownScan Imaging™ and 3D Imaging technology; an optional high-performance fairing is avaliable (000-13581-001) give you greater StructureScan performance at speed; and feature a 30'(9M) transducer cable.
**Note if you require a longer cable you will need 2 each 000-12752-001 transducer extension cable**
|
2329.33 |
|
|
StructureScan 3D® Stainless Steel Thru-Hull Transducer - Single
Lowrance and Simrad Yachting announce the release of new thru-hull StuctureScan 3D® Stainless Steel transducer for the StructureScan 3D® Sonar Imaging product line, providing more range and greater resolution.
As with transom-mount StructureScan 3D® transducers, the thru-hull Stainless Steel version deliver extreme target detail, bottom discrimination plus bait and game fish separation at depths to 300'(92M) and a wider range of 600'(183M) Left & Right coverage.
These Stainless Steel StructureScan 3D® transducers from Airmar® are available only from Navico exclusively for StructureScan 3D® systems. These sturdy, Stainless Steel StructureScan 3D® transducers are resistant to the electrical forces in the environment where it will be used.
Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan plus DownScan Imaging™ & 3D Imaging technology; an optional high-performance fairing is avaliable (000-13581-001) give you greater StructureScan performance at speeds; and feature a 30'(9M) transducer cable.
For boats with steep or variable deadrise hull angles, consumers must purchase the StructureScan® 3D Stainless Steel Thru-Hull Pair (000-13560-001).
|
1362.08 |
|
|
Navico StructureScan™HD Sonar Stainless Steel Thru-Hull Transducer (Single)
LSS-2 Though Hull Transducers
Thru-hull, Stainless Steel LSS-2 StructureScan® HD transducers deliver extreme target detail, bottom discrimination and bait and game fish separation at depths to 300'/92M and a wider range of 600'/183M side-to-side coverage. All StructureScan® HD transducers are packed with an enhanced dual-frequency element array that operates at 455 kHz and 800 kHz.
These Stainless steel transducers from Airmar® are available only from Navico exclusively for StructureScan® HD and StructureScan® systems. These sturdy, bronze transducers are resistant to the electrical forces in the environment where it will be used. Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan plus DownScan Imaging™ technology; includes a high-performance fairing that will give you Structure performance at speeds up to 35 mph; and feature a 30'/9M transducer cable.
|
772.92 |
|
|
StructureScan™HD Sonar Stainless Steel Thru-Hull Transducer (Pair) w/Y-Cable
LSS-2 Though Hull Transducers
Thru-hull, Stainless Steel LSS-2 StructureScan® HD transducers, deliver extreme target detail, bottom discrimination and bait and game fish separation at depths to 300'/92M and a wider range of 600'/183M side-to-side coverage. All StructureScan® HD transducers are packed with an enhanced dual-frequency element array that operates at 455 kHz and 800 kHz.
These Stainless steel transducers from Airmar® are available only from Navico exclusively for StructureScan® HD and StructureScan® systems. These sturdy, Stainless steel transducers are resistant to the electrical forces in the environment where it will be used. Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan plus DownScan Imaging™ technology; includes a high-performance fairing that will give you Structure performance at speeds up to 35 mph; and feature a 30'/9M transducer cable.
|
1251.13 |
|
|
TotalScan Thru-Hull Transducer Medium/High CHIRP, DownScan, StructureScan HD®
TotalScan thru-hull transducer with Medium and High CHIRP. Single transducer for flat to hull mounting or fits deadrises up to 5 degrees with fairing block.
The TotalScan™ Transducer allows anglers to access Medium CHIRP, High CHIRP, DownScan™ Imaging and StructureScan™ using only a single transducer.
Features:
All-in-one transducer featuring Broadband, CHIRP, StructureScan HD and DownScan Imaging™
Supports 83/200kHz Broadband sonar frequencies
Supports Medium and High CHIRP frequencies
Supports 455/800kHz StructureScan® frequencies
Supports Water Temperature
|
922.80 |
|
|
TotalScan Thru Hull Transducer Low/Hi Chirp, DownScan, StructureScan HD
TotalScan thru hull transducer with Low and High CHIRP. Single transducer for flat to hull mounting or fits deadrises up to 5 degrees with fairing block.
The TotalScan™ Transducer allows anglers to access Medium CHIRP, High CHIRP, DownScan™ Imaging and StructureScan™ using only a single transducer.
Features:
All-in-one transducer featuring Broadband, CHIRP, StructureScan HD and DownScan Imaging™
Supports 50/200kHz Broadband sonar frequencies
Supports Low and High CHIRP frequencies
Supports 455/800kHz StructureScan® frequencies
Supports Water Temperature
|
922.80 |
|
|
Panoptix™ PS70 Thru-Hull Transducer with Fairing Block
SEE FISH LIVE. CATCH FISH DEEP.
The Panoptix PS70 stainless steel thru-hull transducer is powered by Garmin RapidReturn™ sonar, which gives you live sonar views up to 1,000’ below the surface.
Live sonar up to 1,000'
Multiple sonar modes
Wide sonar beam
Image stabilization
Thru-hull mounting
800-watt power output
Garmin RapidReturn Sonar
This sonar sends multiple simultaneous pings through the water column. The result is live sonar capabilities up to 1,000’, giving deep-sea anglers a real-time view of what’s below the surface.
LiveVü™ Down Sonar
See real-time live sonar images up to 1,000’. With Garmin RapidReturn, anglers can see small baitfish and target game fish in real-time. The wide 120-degree beam angle covers huge areas of water.
Traditional Sonar
View crisp, clear fish arches with excellent separation of targets under the boat.
Triple-Beam Sonar
Get a 3-way traditional sonar split that gives sonar returns from the port and starboard directions and targets directly under the boat in an easy-to-understand traditional sonar view. Adjust the beam angles to fine-tune your 3 columns of sonar data.
RealVü™ 3D Sonar
Historical scanning technology helps find fish and build a map of the ocean floor while your boat is moving. It shows the entire water column you have passed over in 3D, from the bottom to the surface, and all fish in between. The True Motion 3D sonar returns feature now follows the vessel’s course over the ground.
Quickdraw Contours Feature
Survey areas of the ocean floor in great detail. New QuickDraw Contours feature improvement allows users to survey wide swaths of the ocean floor, even at depths up to 1,000’.
Live Sonar Display Rate
Panoptix PS70 will display at a minimum of 10 frames per second (6 to 8 times faster than the competition), which results in faster sonar returns.
Wide Sonar Beam
Locate bait and fish quickly with a wide 120-degree by 8-degree sonar beam, which covers more water columns at once.
Image Stabilization
An internal sensor will stabilize sonar returns, giving you a clear view even in rough waters.
Thru-Hull Installation
The stainless steel thru-hull transducer can be flush-mounted or pocket-mounted. A fairing block allows for deadrise angles of 0 to 20 degrees. The optional fairing block can survive high operating speeds and withstand the rough conditions found offshore.
High-Power Sonar
800-watt power output gives you stronger sonar penetration through the water.
In the Box:
PS70 down-looking thru-hull down transducer
Fairing block
Stainless steel thru-hull mounting hardware
Power cable
Network cable 40 ft (12 meters) with network adapter
Documentation
General
Dimension: 8.50" x 4.49" x 9.61"
Weight: 10.12 lbs
Waterproof: IPX7
Transducer Beamwidth: 120° x 8°
Transducer Cable Length: 8 ft + 40 ft Extension
Temperature Range: 0°C to 40°C
Electrical Features:
Power Input; 10-35v
Power Usage: 35w
Fuse: 7.5a
Sonar Features
Frequency: 190-210 kHz
Transmit Power: 800w
Maximum Depth: Saltwater 1000'
Sonar Type: Multi-beam phased array
Connections
Garmin Marine Network ports: 1 (small connector)
Sonar Modes
RealVü 3D Historic: Yes
3-Beam Traditional: Yes
Traditional Sonar Source: Yes
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
5499.99 |
|
|
Bronze Thru Hull Transducer
Bronze Thru-Hull Transducers are for large boats and for boats with in-board motors that make typical Transom Mount Transducers ineffective. They are not recommended for trailered boats as the transducer is not flush with the hull. Bronze Thru-Hull Transducers require that a hole be drilled in the hull and the shaping of a fairing block. Professional installation is recommended. Plastic Thru-Hull Transducers are an alternative to Bronze Thru-Hull Transducers.
Description: Bronze thru hull transducer, single or dual beam use. 20/60 degree, 200/83kHz. Transducer dimensions: 5.25L X 2.75"W X 1.2"D (below hull); Shaft diameter: .86". Fairing block not included.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
390.94 |
|