|
Sierra fuel line assemblies meet or exceed both USCG safety regulations and EPA evaporative emissions requirements. Assemblies consist of engine connector, low-perm primer bulb and tank connectors. Designed to be used in connection with 18-8078 large bore 13mm tank adapter. 2-stroke DT model complete with 13mm tank adapter to replace small (11mm) and large (13mm) bore fuel line assemblies. 4-stroke DF model designed with 13mm quick-disconnect tank connector and a prong engine connector to replace most 15 to 140HP assemblies. Hi visibility display packaging.
|
91.59 |
|
|
Sierra fuel line assemblies meet or exceed both USCG safety regulations and EPA evaporative emissions requirements. Assemblies consist of engine connector, low-perm primer bulb and tank connectors. Designed to be used in connection with 18-8078 large bore 13mm tank adapter. 2-stroke DT model complete with 13mm tank adapter to replace small (11mm) and large (13mm) bore fuel line assemblies. 4-stroke DF model designed with 13mm quick-disconnect tank connector and a prong engine connector to replace most 15 to 140HP assemblies. Hi visibility display packaging.
|
91.59 |
|
|
Features Silverado 4000 EPA/CARB compliant outboard fuel line and primer bulb. Heavy duty reinforced rubber hose with a barrier layer for ultra low permeation. SAE J1527 Type B1-15, ISO 8469 cer.tified. All clamps are stainless steel. For pleasure boats only. Display packaged.
|
76.59 |
|
|
Features Silverado 4000 EPA/CARB compliant outboard fuel line and primer bulb. Heavy duty reinforced rubber hose with a barrier layer for ultra low permeation. SAE J1527 Type B1-15, ISO 8469 cer.tified. All clamps are stainless steel. For pleasure boats only. Display packaged.
|
71.99 |
|
|
Features Silverado 4000 EPA/CARB compliant outboard fuel line and primer bulb. Heavy duty reinforced rubber hose with a barrier layer for ultra low permeation. SAE J1527 Type B1-15, ISO 8469 cer.tified. All clamps are stainless steel. For pleasure boats only. Display packaged.
|
79.99 |
|
|
Features Silverado 4000 EPA/CARB compliant outboard fuel line and primer bulb. Heavy duty reinforced rubber hose with a barrier layer for ultra low permeation. SAE J1527 Type B1-15, ISO 8469 cer.tified. All clamps are stainless steel. For pleasure boats only. Display packaged.
|
72.39 |
|
|
Features Silverado 4000 EPA/CARB compliant outboard fuel line and primer bulb. Heavy duty reinforced rubber hose with a barrier layer for ultra low permeation. SAE J1527 Type B1-15, ISO 8469 cer.tified. All clamps are stainless steel. For pleasure boats only. Display packaged.
|
67.99 |
|
|
Features Silverado 4000 EPA/CARB compliant outboard fuel line and primer bulb. Heavy duty reinforced rubber hose with a barrier layer for ultra low permeation. SAE J1527 Type B1-15, ISO 8469 cer.tified. All clamps are stainless steel. For pleasure boats only. Display packaged.
|
88.29 |
|
|
Features Silverado 4000 EPA/CARB compliant outboard fuel line and primer bulb. Heavy duty reinforced rubber hose with a barrier layer for ultra low permeation. SAE J1527 Type B1-15, ISO 8469 cer.tified. All clamps are stainless steel. For pleasure boats only. Display packaged.
|
73.99 |
|
|
Blue Silicone Wet Exhaust Hump with 4 T-Bolt Clamps - 8" ID x 8" Length
Trident Silicone Hump Hose Bellows provide the ultimate flexible connectors for marine wet exhaust systems. They offer much greater tolerance to heat, misalignment, engine movement, and vibration, with significant savings in cost, parts, labor, and space.
Construction:
Tube & Cover: VHT blue silicone
Color: Blue
Reinforcement: Polyester reinforcement
Temperature Range: 350°F (177°C)
Specifications:
Inner Diameter: (inch) 8" / (mm) 203.2
Outer Diameter: (inch) 8.5" / (mm) 216
Working Pressure: (Psi) 15 / (Bar) 1
*Burst Pressure is 4 x Working Pressure
|
230.23 |
|
|
Flojet 01812000C 3/8 Id Equal Pex Tee
|
7.51 |
|
|
Flojet 01870001C 3/8 Id Ftg Lock Clips 6 Ea
|
3.51 |
|
|
Water temperature sending unit, 3/8" - 18 NPT threads. Replaces: Mercruiser 97257A1, 806490T, Mercruiser Vazer 980613, Volvo 3853787.
|
36.39 |
|
|
HTM-2 Fender 8.5" x 20.5" - Black with Adapter
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 26.7" (67.9cm)
Volume - 4.7 gallons (17.8L)
Boat Size - 25' - 30' (7.6 - 9.1M)
Weight - 4.7lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
62.23 |
|
|
HTM-2 Fender 8.5" x 20.5" - Blue with Adapter
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 26.7" (67.9cm)
Volume - 4.7 gallons (17.8L)
Boat Size - 25' - 30' (7.6 - 9.1M)
Weight - 4.7lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
62.23 |
|