Flojet 01812000C 3/8 Id Equal Pex Tee  

Flojet 01810003C 3/8 Id Pex X 1/2 Npt  

3/8 ID PEX X 1/2 14 F

Flojet 01870001C 3/8 Id Ftg Lock Clips 6 Ea  

Spinnaker Pole Ring - Curved Base - 35mm(1-3/8") ID Features: Suits most common mast profiles Grade 316 Stainless Steel Specifications: Material Ø: 8.0mm(5/16") Ring Ø: 35.0mm(1-3/8") Mast Ø: 60.0mm(2-3/8") Weight: 80g(2.8oz)

Wobble Roller 4-3/4"ID with Bushing Steel Plate Black Features: Diameter: 4-3/8" Width: 4-3/8" Shaft: 3/4"

Command Ratchet Hinges - 9-3/8" - Polished 316 Stainless Steel - Pair Constructed from high-grade stainless steel and brass, our Command Ratchet Hinge is ideal for sunpads, bolsters and lounge backrests. This heavy-duty specialty hinge has a 15-degree locking inclination and ratchets up to four positions. Features: Highly polished marine-grade stainless-steel Type-316L  All brass bearings for durability  Meets ABYC H-31 standards class B* application, 250lb ft of torque load for pair  15-degree locking inclination increments starting at 30 degrees  Easily adaptable to many applications  Designed for up to 4" thick cushions  Returns to horizontal position at 100 degrees  Countersunk for #10 fastener or 1/4-20 bolt  Sold in pairs  5-year limited warranty

Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.   The AC-1A-MD-3/8 Part # 0115-0064-0300 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals.  The AC-1A-MD-3/8 may have been modified to handle these chemicals.    March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.     Unit System 60Hz 50Hz Max Flow 2.3 GPM 8.7 LPM Max Head 4.6 FT 1 M Power .005 HP .003 KW Electrical 115V 60HZ      230V 50/60HZ   Type Centrifugal Mag Drive Inlet 3/8"OD Outlet 3/8"OD Wet End Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet     Part # 0115-0064-0300  

Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.   The AC-1A-MD-3/8 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals.  The AC-1A-MD-3/8 may have been modified to handle these chemicals.   March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.      Unit System 60Hz 50Hz Max Flow 2.3 GPM 8.7 LPM Max Head 4.6 FT 1 M Power .005 HP .003 KW Electrical 115V 60HZ          230V 50/60HZ   Type Centrifugal Mag Drive Inlet 3/8"OD Outlet 3/8"OD Wet End Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet

Flojet 01822000C 1/2 Id Equal Tee  

Flojet 01811000C 3/8Id Equal Pex Elbow  

Flojet 20381-060 Ports 3/8"OD Straight Push Flojet Fitting 20381-060 Port x 3/8 inch O.D. Straight Push in Tube Fitting O-Ring Material of Viton (2) per package Used with Flojet and Hanna

Flojet G57520GA Air Pump 5Gpm 3/8" The Flojet G57520GA is a Flojet G57 Series Air Operated Diaphragm Pump, with Polypropylene housing, Santoprene Diaphragm, Santoprene Check Valve, EPDM O-Rings, Hastelloy Springs, and is driven by an internal air motor. This small air operated double diaphragm pump is designed to be the ultimate in performance and reliability.  The robust design combines innovative features and relentless testing to offer a pump that has a long, trouble free service life. This Air Operated duplex Diaphragm pump has leak resistant radial seals, eliminating the need for critical o-ring seals. It is is capable of passing 1/8 inch (3.2 mm) diameter solids easily with large clog free check valves. It has a unique shuttle valve that combines a long life ceramic slide valve with a unique spring design that eliminates stalling.    Applications The Flojet G57520GA Duplex Diaphragm Pump is designed for a wide range of applications and is constructed from a selection of materials suitable for handling a broad range of chemicals. Typical pump uses are Chemical Transfer and Dispensing, Solvent Applications, Parts Washers, Ink Transfer, and Car Wash Systems. When starting this pump, regulate the gas pressure to desired setting. For most installations 20 PSI 1.4 bar inlet will be adequate, although DO NOT go below 20 PSI. 

Flojet D3231B5011A Mpu 24V 100Gph 3/8 Ports Flojet D3231B5011A Self-Priming Duplex Diaphragm Bypass Pump - 60 PSI Bypass, 1.6 GPM, 24 VDC Polypropylene Pump    The Flojet D3231B5011A is a double diaphragm pump includes an integrated 24 VDC electric motor. Engineered for the ability to be self-priming up to 8 feet. Pump body is made from polypropylene for corrosion and chemical resistance. Features the ability to run dry without damaging the critical components of the pump and features a built-in back flow preventer. Specifications: Voltage: 24 VDC GPM: 1.6 GPM Bypass: 60 PSI Max Pressure: 100 PSI  Ports: 3/8" NPT Female Material: Polypropylene Diaphragm: Buna Check Valve: Buna Motor: Electric

Flojet G57-320GA Pump Aod Viton 3/8 Port The Flojet G57320GA is a Flojet G57 Series Air Operated Diaphragm Pump, with Polypropylene housing, Viton Diaphragm, Viton Check Valve Seat, Viton O-Rings, Hastelloy Springs, and is driven by an internal air motor. This small air operated double diaphragm pump is designed to be the ultimate in performance and reliability. The robust design combines innovative features and relentless testing to offer a pump that has a long, trouble free service life.  This Air Operated duplex Diaphragm pump has leak resistant radial seals, eliminating the need for critical o-ring seals. It is is capable of passing 1/8 inch (3.2 mm) diameter solids easily with large clog free check valves. It has a unique shuttle valve that combines a long life ceramic slide valve with a unique spring design that eliminates stalling. The air or CO2 inlet can handle pressures up to 100 PSI (6.9 bar) and has a quiet operation with a large exhaust muffler with a maximum noise level of 87dB.   The Flojet G57320GA Duplex Diaphragm Pump is designed for a wide range of applications and is constructed from a selection of materials suitable for handling a broad range of chemicals. Typical pump uses are Chemical Transfer and Dispensing, Solvent Applications, Parts Washers, Ink Transfer, and Car Wash Systems. When starting this pump, regulate the gas pressure to desired setting. For most installations 20 PSI 1.4 bar inlet will be adequate, although DO NOT go below 20 PSI. Pump will operate according to air supply.