Flojet 01870001C 3/8 Id Ftg Lock Clips 6 Ea  

Flojet 01870002C 1/2 Id Ftg Lock Clips 6 Ea  

Flojet 01810003C 3/8 Id Pex X 1/2 Npt  

Flojet 01812000C 3/8 Id Equal Pex Tee  

3/8 ID PEX X 1/2 14 F

Spinnaker Pole Ring - Curved Base - 35mm(1-3/8") ID Features: Suits most common mast profiles Grade 316 Stainless Steel Specifications: Material Ø: 8.0mm(5/16") Ring Ø: 35.0mm(1-3/8") Mast Ø: 60.0mm(2-3/8") Weight: 80g(2.8oz)

Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.   The AC-1A-MD-3/8 Part # 0115-0064-0300 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals.  The AC-1A-MD-3/8 may have been modified to handle these chemicals.    March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.     Unit System 60Hz 50Hz Max Flow 2.3 GPM 8.7 LPM Max Head 4.6 FT 1 M Power .005 HP .003 KW Electrical 115V 60HZ      230V 50/60HZ   Type Centrifugal Mag Drive Inlet 3/8"OD Outlet 3/8"OD Wet End Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet     Part # 0115-0064-0300  

Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.   The AC-1A-MD-3/8 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals.  The AC-1A-MD-3/8 may have been modified to handle these chemicals.   March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.      Unit System 60Hz 50Hz Max Flow 2.3 GPM 8.7 LPM Max Head 4.6 FT 1 M Power .005 HP .003 KW Electrical 115V 60HZ          230V 50/60HZ   Type Centrifugal Mag Drive Inlet 3/8"OD Outlet 3/8"OD Wet End Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet

Flojet 20381-704 Kit Ftg 1/2Npt X 3/4Barb Flojet Snap-In Quad Port Kit, with EPDM O-Ring, 1/2" Qest (Straight) Thread, Straight (pair). The Snap-In Portion of These Fittings Measures 1" Diameter. For 6 GPM or larger pumps only. This is the same as Jabsco 1877K-3242S

Flojet 20381-060 Ports 3/8"OD Straight Push Flojet Fitting 20381-060 Port x 3/8 inch O.D. Straight Push in Tube Fitting O-Ring Material of Viton (2) per package Used with Flojet and Hanna

Flojet G57520GA Air Pump 5Gpm 3/8" The Flojet G57520GA is a Flojet G57 Series Air Operated Diaphragm Pump, with Polypropylene housing, Santoprene Diaphragm, Santoprene Check Valve, EPDM O-Rings, Hastelloy Springs, and is driven by an internal air motor. This small air operated double diaphragm pump is designed to be the ultimate in performance and reliability.  The robust design combines innovative features and relentless testing to offer a pump that has a long, trouble free service life. This Air Operated duplex Diaphragm pump has leak resistant radial seals, eliminating the need for critical o-ring seals. It is is capable of passing 1/8 inch (3.2 mm) diameter solids easily with large clog free check valves. It has a unique shuttle valve that combines a long life ceramic slide valve with a unique spring design that eliminates stalling.    Applications The Flojet G57520GA Duplex Diaphragm Pump is designed for a wide range of applications and is constructed from a selection of materials suitable for handling a broad range of chemicals. Typical pump uses are Chemical Transfer and Dispensing, Solvent Applications, Parts Washers, Ink Transfer, and Car Wash Systems. When starting this pump, regulate the gas pressure to desired setting. For most installations 20 PSI 1.4 bar inlet will be adequate, although DO NOT go below 20 PSI. 

Flojet D3231B5011A Mpu 24V 100Gph 3/8 Ports Flojet D3231B5011A Self-Priming Duplex Diaphragm Bypass Pump - 60 PSI Bypass, 1.6 GPM, 24 VDC Polypropylene Pump    The Flojet D3231B5011A is a double diaphragm pump includes an integrated 24 VDC electric motor. Engineered for the ability to be self-priming up to 8 feet. Pump body is made from polypropylene for corrosion and chemical resistance. Features the ability to run dry without damaging the critical components of the pump and features a built-in back flow preventer. Specifications: Voltage: 24 VDC GPM: 1.6 GPM Bypass: 60 PSI Max Pressure: 100 PSI  Ports: 3/8" NPT Female Material: Polypropylene Diaphragm: Buna Check Valve: Buna Motor: Electric

Flojet G57-320GA Pump Aod Viton 3/8 Port The Flojet G57320GA is a Flojet G57 Series Air Operated Diaphragm Pump, with Polypropylene housing, Viton Diaphragm, Viton Check Valve Seat, Viton O-Rings, Hastelloy Springs, and is driven by an internal air motor. This small air operated double diaphragm pump is designed to be the ultimate in performance and reliability. The robust design combines innovative features and relentless testing to offer a pump that has a long, trouble free service life.  This Air Operated duplex Diaphragm pump has leak resistant radial seals, eliminating the need for critical o-ring seals. It is is capable of passing 1/8 inch (3.2 mm) diameter solids easily with large clog free check valves. It has a unique shuttle valve that combines a long life ceramic slide valve with a unique spring design that eliminates stalling. The air or CO2 inlet can handle pressures up to 100 PSI (6.9 bar) and has a quiet operation with a large exhaust muffler with a maximum noise level of 87dB.   The Flojet G57320GA Duplex Diaphragm Pump is designed for a wide range of applications and is constructed from a selection of materials suitable for handling a broad range of chemicals. Typical pump uses are Chemical Transfer and Dispensing, Solvent Applications, Parts Washers, Ink Transfer, and Car Wash Systems. When starting this pump, regulate the gas pressure to desired setting. For most installations 20 PSI 1.4 bar inlet will be adequate, although DO NOT go below 20 PSI. Pump will operate according to air supply. 

Flojet 01740-003S Strainer 3/8" Barb X 3/8" Barb Flojet Strainer with 3/8” Hose Barb Inlet and 3/8” Hose Barb Outlet, In-Line Design, Fine 40 Mesh Stainless Steel Screen   Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water.   Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap.   Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.   Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)   Maximum Water Temperature: 160F (70C) Maximum Pressure: 70 PSI (5 bar)   The Strainers that are Equiped with a "Direct Plug-In Quad Port" will fit into the Snap-In Quad Ports on Flojet Diaphragm Pumps and Jabsco Diaphragm Pumps sized under 6 GPM.

Flojet G57-3208 Pump Aod Viton 3/8" Ports Flojet Diaphragm Pump AOD Air Powered, 3/8" Hose Barb Snap-In Ports, 4.5GPM Max, Polypropylene, Viton Check Valve Seat and Diaphragm, 1/4” Hose Barb Straight Plastic Air Inlet Capable of Air or CO2 drive pressures up to 100PSI (6.9bar) Highest flow rate for any air pump of comparable size Robust Design with durable integral mounting Patented Shuttle Valve, eliminates stalling Capable of passing solids up to 3.2mm diameter easily with large clog-free Check Valves Corrosion Resistant materials capable of handling a wide range of chemicals Sanitary design with insert molded diaphragm (Santroprene only) Leak Resistant radial seals, no critical o-ring seals Quiet Operation with large exhaust muffler Ease of Installation with all quick disconnect ports Stall-proof design with patented shuttle valve   Automotive Cleaning and Recycling;Chemical Transfer and dispensing;Bag-In-Box chemicals Parts Washers ;Car Wash Systems   Innovative compact design features a patented shuttle valve that eliminates stalling and provides a long life. Features a chemically resistant polypropylene body with a choice of EP/PP blend, FKM or FFKM elastomers, as well as quick disconnect liquid and gas port fittings for easy installation.