R509C-LH CHIRP Transducer Features: Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) 25-Internal, Broadband Ceramic Elements Broadband / CHIRP / Spread Spectrum Operating frequencies: Low—Chirps from 28 kHz to 60 kHz High—Chirps from 130 kHz to 210 kHz Beamwidth (Adjustable): Low—23° to 9° High—8° to 4° 10 m (33’) cable, no connector Fast-response water-temperature sensor Boat size: 12 m (40’) and above Hull Type: Fiberglass, wood, or metal Exclusive Transducer ID® This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R509C-LHW CHIRP Transducer Features: Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) 25-Internal, Broadband Ceramic Elements Broadband / CHIRP / Spread Spectrum Operating frequencies: Low—Chirps from 28 kHz to 60 kHz High—Chirps from 130 kHz to 210 kHz Beamwidth (Adjustable): Low—23° to 9° High—8° to 4° 10 m (33’) cable, no connector Fast-response water-temperature sensor Boat size: 12 m (40’) and above Hull Type: Fiberglass, wood, or metal Exclusive Transducer ID® This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R509C-LM CHIRP 3KW Transducer Unlock the true potential of your fish-finder with the superior quality and performance of an AIRMAR Chirp-ready transducer. Features: Depth & fast-response water-temperature sensor Epoxy transducer housing with high-performance fairing For use on hulls up to 25° deadrise 82 kHz of total bandwidth from one transducer Benefits of Thru-Hull Transducers with High-Performance Fairing: The best performance on vessels 25 feet and up because the transducer face is in “clean” water below the boundary layer (bubbles running down the hull) The fairing compensates for hull deadrise and reduces turbulence over the transducer face, which allows tracking at speeds over 30 knots (35 MPH) When mounted in clean water (forward of propellers and running gear), thru-hulls produce the most effective signal return since nothing on the vessel interferes with the transducer’s active surface Specifications: Boat Size: 12 m (40 ft.) and above Hull Type: Fiberglass, wood, or metal Engine Type: Inboard, outboard or I/O Low (28 kHz to 60 kHz): 23° to 9° port/starboard 11° to 5° fore-aft beamwidth Maximum depth 10000 ft Medium (80 kHz to 130 kHz): 13° to 8° beamwidth Maximum depth 3000 ft. Bottom Coverage Relative to Frequency and Depth Depth (50 ft.): 10 ft. Depth (100 ft.): 24 ft. Depth (300 ft.): 68 ft. Depth (600 ft.): 136 ft. Depth (1000 ft.): 228 ft. Depth (1500 ft.): 340 ft. Depth (2000 ft.): 456 ft. Depth (2500 ft.): 570 ft. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R111-LH Chirp In-Hull Transducer - Bare Wire Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 117 kHz of total bandwidth in just one installation, saving customers time and money. A Hard-Core In-Hull model in the Chirp Thru-Hull product line L/H Chirps across the following bandwidths: L/H Model -Low Frequency 38-75 kHz, High Frequency 130-210 kHz Features Depth & fast-response water-temperature sensor Low—CHIRPS from 38 kHz to 75 kHz 19° to 10° beamwidth High—CHIRPS from 130 kHz to 210 kHz 8° to 4° beamwidth 117 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 38, 50, and 200 kHz plus everything else in the bandwidth Fishing Profile: Recreational and commercial inshore and offshore fishing (deep-water canyon and sea-mount tracking) Urethane transducer housing Hull Type: Solid fiberglass only Exclusive Xducer ID® technology Hull Deadrise: 0° to 22° Acoustic Window: Epoxy/urethane All mounting hardware provided, including tank Weight: 19.7 kg (43.4 lb) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

PM275C-LHW CHIRP Transducer Keel-mount 1kW dual-band CHIRP fishfinder transducer. The PM265 is a Pocket/Keel mount unit available in the Low/Medium and Low/High bands. The PM275 is a wide beam version of the PM265 with Low/High bands and a wide beam. Specifications: Type: CHIRP dual-band fishfinder transducer LM Version: Low Band 42-65 kHz / Beam width 25-16° // Medium Band 85-135 kHz / Beam width 16-11° LH Version: Low Band 42-65 kHz / Beam width 25-16° // High Band 130-210 kHz / Beam width 10-6° LHW Version: Low Band 42-65 kHz / Beam width 25-16° // High Wide Band 150-250 kHz / Beam width 25° Power Rating: 1000 watts Mounting: Pocket/Keel Mount Housing: Urethane Hull Aperture: 1.75" (44.5mm) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Low/High Frequency - In-Hull Chirp Transducer without Connector Rely on Airmar's new broadband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000') with 5 to 10 times greater detail and resolution so precise it_s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 112 kHz of total bandwidth in just one installation, saving customers time and money. As the ELITE model in the Chirp In-Hull product line, the R599 LH Chirps across the following bandwidths: LH Model - Low Frequency 28-60 kHz/High Frequency 130-210 kHz Features: Depth only Low-CHIRPS from 28 kHz to 60 kHz 23° to 9° beamwidth High-CHIRPS from 130 kHz to 210 kHz 8° to 4° beamwidth 112 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 28, 38, 50, and 200 kHz plus everything else in the bandwidth Fishing Profile: Recreational and commercial inshore and offshore fishing (deep-water canyon and sea-mount tracking) Epoxy transducer housing Hull Type: Solid fiberglass only Specifications: Hull Deadrise: 0° to 22° Acoustic Window: Epoxy/urethane All mounting hardware provided, including tank Weight: 19.7 kg (43.4 lb) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

M265C-LH Low/High CHIRP In-Hull Transducer The Airmar M265C-LH is a 1,000W transducer designed to work with chirp sonar systems and utilizes the Low and High-Frequency ranges (Frequency Range Below). The M265C has 8 highly sensitive internal broadband ceramic assemblies to accurately mark depth, bait, and fish, making it the perfect choice for commercial and recreational fishermen. You will also be able to see increased target detection whether you are fishing inshore or in deep offshore canyons. Designed for boats 8M (25) and above and only compatible with solid fiberglass hulls. *Includes plastic/urethane transducer housing. Features: Low: CHIRPS from 42 kHz to 65 kHz 25° to 16° beamwidth High: CHIRPS from 130 kHz to 210 kHz 16° to 11° beamwidth 103 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth No Connector This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R109C-LH 2kW Thru-Hull Transducer CHIRP transducers enable bottom detection down to 3,000M (10,000') with 5 to 10 times greater detail and resolution so precise it's possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 117 kHz of total bandwidth in just one installation, saving customers time and money. As the HARD CORE model in the CHIRP Thru-Hull product line, the R109 LH/LM CHIRPS across the following bandwidths: LH Model - Low Frequency 38-75 kHz/High Frequency 130-210 kHz Features: Depth & fast-response water-temperature sensor Low: CHIRPS from 38 kHz to 75 kHz 19° to 10° port-starboard beamwidth (10° to 5° fore-aft beamwidth) High: CHIRPS from 130 kHz to 210 kHz 8° to 4° beamwidth 117 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 38, 50, and 200 kHz plus everything else in the bandwidth Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) Urethane transducer housing with High-Performance FairingBoat Size: 12M (40') and above Hull Type: Fiberglass, wood, or metal This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

TM185C-HW-MM CHIRP Transducer Transom Mount Needs Mix & Match Cable Get more coverage under the boat with Airmar's wide beam Chirp. Offering a high frequency range of 150-250 kHz and a constant 25° Beamwidth, this transducer is truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using this wide beam transducer will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers. A unique property of the high frequency transducers is that the Beamwidth is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's wide beam format also creates crisper and larger return images on the display. Features: CHIRPS across the following bandwidths: — High-Frequency: 150-250 kHz 25° Constant Beamwidth 1kW (1,000 Watt) RMS Power Depth Range: 600'-800' Depth & fast-response water-temperature sensor Urethane housing and stainless steel kick-up mounting bracket Boat Size: 8 m to 12 m (25' to 40') Boat Type: Outboards; I/O Hull Type: Fiberglass, Wood, Metal Can retrofit to existing TM258, TM260, TM265, and TM275 bracket Needs Mix & Match Cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B765C-LM Bronze CHIRP Transducer - Needs Mix & Match Cable - Does NOT Work with Simrad & Lowrance Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 85 kHz of total bandwidth in just one installation, saving customers time and money. A Thru-Hull Chirp transducer perfectly suited for smaller fishing boats, the B765L/M Chirps across the following bandwidths:*L/M -Low Frequency 40-75 kHz, Medium Frequency 80-130 kHz * Please Note: The low frequency operating band is 300 W. The medium frequency operating band is 600 W. Features Depth & fast-response water-temperature sensor Low—CHIRPS from 40 kHz to 75 kHz, 32° to 21° beamwidth Medium—CHIRPS from 80 kHz to 130 kHz, 24° to 16° beamwidth 85 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidth All the advantages of the larger Thru-Hull Chirp transducers, suitable for smaller boats Bronze transducer housing with High-Performance Fairing Boat Size: Up to 9 m (30’) and above Hull Type: Fiberglass or wood Exclusive Xducer ID® technology Hull Deadrise: Up to 24° with a fairing Acoustic Window: Urethane Weight: 2.5 kg (5.5 lb) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

R599 Low/Med Frequency In-Hull Chirp Transducer - Bare Wire Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 102 kHz of total bandwidth in just one installation, saving customers time and money. As the ELITE model in the Chirp In-Hull product line, the R599LM Chirps across the following bandwidths: LM Model - Low Frequency 28-60 kHz/Medium Frequency 80-130 kHz. Features: Depth Only Chirp Technology L/M Frequency 2-3 kW High-Performance Epoxy 25 internal ceramics Exclusive Xducer ID® technology Specifications: Hull Deadrise: 0° to 22° Acoustic Window: Epoxy/urethane All mounting hardware provided, including tank Weight: 19.7 kg (43.4 lb) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B765C-LH Bronze Chirp Transducer Requires Mix and Match Cable Thru-hull bronze model with fairing. Same physical size as a B744V, with 600W power rating. Need mix and match cable. Depth and fast-response water temperature sensor. LH model has Low (40-75kHz) and High (130-210kHz) frequency bands.  Please note: Does not work with Navico This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Airmar R109LM Thru-Hull Transducer - Bare Wires Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000M (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 107 kHz of total bandwidth in just one installation, saving customers time and money. As the HARD CORE model in the Chirp Thru-Hull product line, the R109LM Chirps across the following bandwidths: LM Model - Low Frequency 38-75 kHz/Medium Frequency 80-130 kHz Features: Depth & fast-response water-temperature sensor Low—CHIRPS from 38 kHz to 75 kHz 19° to 10° port-starboard beamwidth (10° to 5° fore-aft beamwidth) Medium—CHIRPS from 80 kHz to 130 kHz 13° to 8° beamwidth 87 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 38, 50, 88, and107 kHz plus everything else in the bandwidth Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) Urethane transducer housing with High-Performance Fairing Boat Size: 12 m (40’) and above Hull Type: Fiberglass, wood, or metal Exclusive Xducer ID® technology Specifications: Hull Deadrise: 0° to 25° Acoustic Window: Epoxy/urethane Weight: 15.1 kg (33.3 lb) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B75HW High Wide Tilted Element Chirp Transducer - 20 Degree Deadrise, 600W Thru Hull Requires Mix and Match Cable for the appropriate Fishfinder it will be connected to. Airmar’s low-profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The B75HW combines the benefits of the high-frequency band for amazing target separation on baitfish and schooling gamefish, with a wide 30° beamwidth for maximum coverage under the boat. The B75H transducer delivers up to 100 kHz of total bandwidth in just one installation and delivers amazing coverage under the boat in depths to 106 meters (350'). B75HW transmits across the following bandwidth: High frequency 150 to 250 kHz The transducer is installed almost flush to the hull. The tilt of the element corrects for the hull deadrise by orienting the beam directly down. This ensures maximum echo returns to the transducer for more accurate depth readings. Fixed 20° tilted version for 16° to 24° hull deadrise Features:  Depth and fast-response water-temperature sensor 600 W with a maximum depth performance of 106 m (350') High frequency: 150 to 250 kHz 30° beamwidth High frequency delivers great shallow-water performance, bottom detail, and clear fish-target returns Low-profile, thru-hull housing provides good resolution at speed when installed properly Bronze housing for use on stepped, planing, or displacement hull Exclusive Xducer ID® technology Fixed 20° tilted version for 16° to 24° hull deadrise Hole Size: 70 mm (2-13/16") CHIRP-Ready Single-Band This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B75H Bronze Chirp Thru Hull 0° Tilt - 600W Requires Mix and Match Cable Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money. Features: Depth & fast-response water-temperature sensor High—CHIRPS from 130 kHz to 210 kHz, 15° to 9° beamwidth 0° tilted versions, 600w 80 kHz of total bandwidth from one transducer Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth Bronze transducer housing Boat Size: Up to 8 m (25’) Hull Type: Fiberglass or wood Exclusive Xducer ID® technology This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.