|
B785M Bronze Thru-Hull Chirp Transducer with High Speed Fairing Block
Features:
Frequency: Chirp 80 - 130 kHz
Power Rating: 600 Watts
Connector: 10 Pin
Fairing Block: High Speed Fairing Block Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
960.00 |
|
|
B265LH Bronze Thru-Hull CHIRP Transducer - 12-Pin
Bronze, Thru-Hull CHIRP Transducer with 12-Pin Connector, Low-Freq: 42-65 kHz, High-Freq: 130-210 kHz.
The B265LH is a bronze thru-hull CHIRP transducer for use with Furuno's CHIRP broadband Fish Finders. The B265LH comes complete with high-speed fairing block
Traditional marine Fish Finders operate at discrete frequencies such as 50 kHz and 200 kHz, use relatively short-duration transmit pulses, and use narrowband sonar transducers. In contrast, CHIRP (Compressed High-Intensity Radar Pulse) uses a precise sweep pattern of many frequencies within a long-duration transmit pulse from a broadband transducer. The equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine Fish Finder. The echo energy returning to the transducer is likewise superior to that generated by a conventional transducer. The combination of CHIRP, a broadband transducer, and Furuno’s superior Digital Signal Processing, results in dramatically increased fish and bottom detection.
The B265LH CHIRPS across the following bandwidths:
Low-Frequency: 42-65 kHz
High-Frequency: 130-210 kHz
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1706.66 |
|
|
B275LHW Bronze Thru-Hull CHIRP Transducer - 12-Pin
Bronze, Thru-Hull CHIRP Transducer with Temp, with 12-Pin Connector, Low-Freq: 42-65 kHz, High-Freq: 150-250 kHz.
The 275LH-W series transducers are truly broadband at its best. Paired with Furuno’s DFF1-UHD, the B275LH-W provides a high frequency range of 150-250Khz and a constant 25° beamwidth. The “W” stands for wide and that’s what the B275LH-W really delivers. Unlike traditional high frequency (200kHz) transducers that provide narrow performance, this unique, new wide beam/high frequency design achieves over six times the coverage under the boat compared to standard high-frequency CHIRP Transducers.
The B275LH-W is also compatible with the FCV295 and FCV1150 variable frequency Fish Finders, providing the same frequency range with a 25° wide beamwidth provided at every frequency.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2240.00 |
|
|
B150M Bronze Thru-Hull Chirp Transducer - Med Frequency - 0°
Features:
Frequency: Chirp 95-155 kHz
Power Rating: 300W
Connector: 10 Pin
Tilt: 0 Degree
Deadrise of Hull: 0-7 degrees
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
506.66 |
|
|
Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (10-Pin)
600 Watts
50/200 kHz
40/10 degree Beam Angles
Bronze Thru-Hull with Speed and Temperature
30 Foot Cable with 10-Pin Connector
High-Speed Fairing Block Included
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
480.00 |
|
|
Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (8-Pin)
600 Watts
50/200 kHz
40/10 degree Beam Angles
Bronze Thru-Hull with Speed and Temperature
30 Foot Cable with 8-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
426.67 |
|
|
B265LH Bronze Thru-Hull Mount Transducer w/Depth & Temp - 12-Pin
Garmin's best performing 1 kW thru-hull transducer, this mount performs well in deep water and has exceptional bottom and water column detail.
This transducer has a depth of 3,000 feet; an operating frequency of 42 to 65 kHz and 130 to 210 kHz; a beamwidth of 16 to 25 degrees and 6 to 10 degrees; and a 0 to 20 degree deadrise.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
Compatible Devices:
GPSMAP® 7607xsv, 7608xsv, 7610xsv, 7612xsv, 7616xsv
GSD™ 25 Premium Sonar Module
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1413.00 |
|
|
B285M Medium-Frequency CHIRP Transducer with Temperature - Bronze Thru-Hull with High Speed Fairing Block
Features:
Frequency: Chirp 85 - 135 kHz
Power Rating: 1 KW
Connector: 10 Pin
Fairing Block: High Speed Fairing Block Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1386.67 |
|
|
B265LM Bronze Thru-Hull Mount Transducer with Depth & Temperature
Garmin's best performing 1 kW thru-hull transducer, this bare wire mount performs well in deep water and has exceptional bottom and water column detail.
This transducer has a depth of 3,000 ft; an operating frequency of 42 to 65 kHz and 85 to 135 kHz; a beamwidth of 16 to 25 degrees and 11 to 16 degrees; and a 0 to 20 degree deadrise.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
Compatible Devices:
GSD™ 26 CHIRP Professional Sonar Module
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1574.99 |
|
|
Bronze Broadband Thru-Hull with Temp and Hi-Speed Fairing Block, 1kW (No Plug)
526TID-HDN Thru-Hull Transducer with Broadband Technology
1 kW
50/200 kHz, no Diplexer
20/6 degree Beam Angles
Bronze Thru-Hull with Temperature
10 Meter Cable
No connector provided
Ships with High-Speed Fairing Block, # AIR-033-391
B260
MB1100 required for some applications - contact Furuno for more information
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1280.00 |
|
|
525TID-BHD Bronze Thru-Hull Transducer with Temp and High-Speed Fairing Block
1kw
50/200 kHz with Diplexer
15x21 degree Beam Angle at 50 khz
3x5 degree Beam Angle at 200 kHz
Bronze Thru-Hull with Temperature
10-Pin Connector
Ships with High-Speed Fairing Block AIR-033-523
The Clear Choice
This new 1 kW transducer makes 600 W fishfinders perform like their more powerful big brothers especially at 50 kHz. The B258 is 25 times more sensitive that a single element 50/200 kHz transducer. How does it do it? The B258 uses Airmars new and unique ceramic-element construction. The resulting narrow beams will clearly distinguish individual fish and bottom fish from their habitat at up to 2,200 feet.
Streamlined Performance
Maximize performance by installing the B258 with our custom fit high-performance fairing. At speeds over 30 knots, screen displays show clear images and a clean bottom trace.
Supercedes B256 transducer, with significant increase in performance at 50 kHz.
Recommended for sport fishing boats above 26' (8m) and small to mid size commercial fishing boats.
Includes temperature sensor
Transducer ID option
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
960.00 |
|
|
R109LH Urethane Chirp Thru-Hull with Temp & High Speed Fairing Block - No Connector
Transducer Features:
Airmar R109 Housing Style Transducer
The Broadband R109 operates at any frequency between 38 kHz to 75kHz and 130 kHz to 210 kHz. Adjusting the frequency allows you to change the R109's beamwidth and depth capabilities. For example if you are bottom fishing in 61 m (200') of water, the narrow high-frequency beam will display extreme bottom detail and fish holding tight to structure. If you are tuna or marlin fishing in deep blue water, the wider, low-frequency beam will not only give deep-water bottom detail, but more importantly show you more of what is around your vessel, including bait which may attract game fish.
Because the R109 has a bandwidth that covers a continuous frequency spectrum, next generation Fish Finders utilizing Furuno Free Synthesizer (FFS) technology can be made “tunable”, so fishermen can “dial-in” the best frequency for the target fish species or conditions.
Standard Features:
Thru-Hull Transducer with High Performance Fairing Block Kit
3kW Low Frequency, 2kW High Frequency
Furuno Free Synthesizer (FFS) compatible - select any two frequencies from 38 kHz to 75kHz and 130 kHz to 210 kHz
Beam angle dependent upon frequency:
Low = 19 degrees to 10 degrees port-starboard (10 degrees to 5 degrees fore-aft)
High = 8 degrees to 4 degrees
No Connector
Designed for 40ft and above boats made of fiberglass, wood or metal
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3324.44 |
|
|
556TID-HDD SS260 Stainless Steel Thru-Hull Transducer w/Temp and Fairing Block - 10 Pin
The SS260 is our best performing, stainless-steel, thru-hull stem for 1 kW echosounders. Its construction utilizes separate 50 kHz and 200 kHz elements for unparalleled deep-water performance and unmatched bottom and water-column detail. The SS260’s narrow beam gives crisp image detail especially suited for fishing shelves, intricate bottom structures, and wrecks.
Standard Features
1,000 Watts Power
50/200 kHz with Diplexer
20/6 degree Beam Angles
Stainless Steel Thru-Hull with Temperature
10-Pin Connector
High Speed Fairing Block included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1333.33 |
|
|
B744V 600 Watt Bronze thru hull transducer with depth, speed, and temperature.
Compatible with the following sounder modules:
DSM30
DSM300
Compatible hull material: Wood and fiberglass
Max power: 600 W
Frequency: 200/50 kHz
Cable: 30ft (10m) cable with connector
Hole diameter for installation: 2"
Other: Self-sealing removable paddle wheel insert.
Includes high speed fairing block.
|
494.98 |
|
|
SS75 High Chirp 12 Degree Bronze Thru-Hull xSonic Transducer
Airmar’s low-profile, Chirp-ready transducer models are the perfect addition to smaller boats, such as center consoles. The high-frequency band has a narrow beamwidth, excellent for pinpointing fish holding tight to wrecks, reefs, and other structures. High frequency also shows amazing target separation on baitfish and schooling gamefish. The SS75H transducer, operating at 130 to 210 kHz, delivers up to 80 kHz of total bandwidth in just one installation for outstanding bottom detail and fish-target resolution.
This Tilted Element™ transducer has the element fixed at a 12-degree angle within the housing. Because the transducer is installed almost flush with the hull, the tilt corrects for the hull deadrise. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.
Features:
Depth and fast-response water-temperature sensing
600 W of power with a maximum depth of 214 m (700')
High frequency (130 to 210 kHz)
15- 9 degree beamwidth
High frequency delivers great shallow-water performance, bottom detail, and clear fish-target returns
Low-profile, thru-hull housing provides good display resolution at speed when installed properly
Recommended for stepped, planning, or displacement hull
Stainless steel housing for use in all hull materials
Patented Xducer ID® technology
Specifications:
Brand: Airmar Technology
Acoustic Window: Urethane
Cable-Length: 10 m (33')
Common Use: Fishing, Commercial Fishing
Connector: Simrad 9-Pin, Lowrance 9-Pin, Navico 9-Pin
Country of Origin: USA
Cross Reference: 000-13912-001
Deadrise Range: 8-15 degrees
Display Connector: 9N
Frequency Band: High
Functions: Depth, Temperature
High Frequency: 130-210 kHz
High Frequency Beamwidth: 15-9 degrees
Hole Size: Fiberglass or wood hull—70 mm or 2-13/16", Metal hull—79 mm or 3-1/8"
Hull Material: Compatible w/ all hull materials
Material: Stainless Steel
Max Deadrise: Up to 24 degrees
Max Deadrise Angle: 24 degrees
Max Depth: 214 m (700')
Max Vessel LOA: Up to 8 m (26')
Mix and Match Series: 12-Pin Chirp
Mounting Style: Tilted Element Thru-Hull
Power Rating: 600 W
Retractable housing: No
Sensor Connector: MMC
Single or Dual Frequency: CHIRP-Ready Single-Band
Tilt Angle: 12 degrees
Tilted Element: Yes
Weight: 1.4 kg (3 lbs.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
861.48 |
|