|
B285M Medium-Frequency CHIRP Transducer with Temperature - Bronze Thru-Hull with High Speed Fairing Block
Features:
Frequency: Chirp 85 - 135 kHz
Power Rating: 1 KW
Connector: 10 Pin
Fairing Block: High Speed Fairing Block Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1386.67 |
|
|
TM185M Medium-Frequency CHIRP Transducer with Temperature - Urethane Transom Mount with Stainless Bracket
Features:
Frequency: Chirp 85 - 135 kHz
Power Rating: 1KW
Connector: 10 Pin
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1066.67 |
|
|
B260 Bronze Broadband Thru-Hull Transducer with Temp, Built-in Diplexer and Hi-Speed Fairing Block, 1kW (10-Pin)
526T-HDD Bronze Thru-Hull Transducer with Broadband Technology
1,000 Watts Power
50/200 kHz with Diplexer
20/6 degree Beam Angles
Bronze Thru-Hull with Temperature
10-Pin Connector
Ships with High-Speed Fairing Block, # AIR-033-391
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1493.33 |
|
|
B265LH Bronze Thru-Hull CHIRP Transducer - 12-Pin
Bronze, Thru-Hull CHIRP Transducer with 12-Pin Connector, Low-Freq: 42-65 kHz, High-Freq: 130-210 kHz.
The B265LH is a bronze thru-hull CHIRP transducer for use with Furuno's CHIRP broadband Fish Finders. The B265LH comes complete with high-speed fairing block
Traditional marine Fish Finders operate at discrete frequencies such as 50 kHz and 200 kHz, use relatively short-duration transmit pulses, and use narrowband sonar transducers. In contrast, CHIRP (Compressed High-Intensity Radar Pulse) uses a precise sweep pattern of many frequencies within a long-duration transmit pulse from a broadband transducer. The equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional marine Fish Finder. The echo energy returning to the transducer is likewise superior to that generated by a conventional transducer. The combination of CHIRP, a broadband transducer, and Furuno’s superior Digital Signal Processing, results in dramatically increased fish and bottom detection.
The B265LH CHIRPS across the following bandwidths:
Low-Frequency: 42-65 kHz
High-Frequency: 130-210 kHz
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1706.66 |
|
|
B785M Bronze Thru-Hull Chirp Transducer with High Speed Fairing Block
Features:
Frequency: Chirp 80 - 130 kHz
Power Rating: 600 Watts
Connector: 10 Pin
Fairing Block: High Speed Fairing Block Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
960.00 |
|
|
R109LH Urethane Chirp Thru-Hull with Temp & High Speed Fairing Block - No Connector
Transducer Features:
Airmar R109 Housing Style Transducer
The Broadband R109 operates at any frequency between 38 kHz to 75kHz and 130 kHz to 210 kHz. Adjusting the frequency allows you to change the R109's beamwidth and depth capabilities. For example if you are bottom fishing in 61 m (200') of water, the narrow high-frequency beam will display extreme bottom detail and fish holding tight to structure. If you are tuna or marlin fishing in deep blue water, the wider, low-frequency beam will not only give deep-water bottom detail, but more importantly show you more of what is around your vessel, including bait which may attract game fish.
Because the R109 has a bandwidth that covers a continuous frequency spectrum, next generation Fish Finders utilizing Furuno Free Synthesizer (FFS) technology can be made “tunable”, so fishermen can “dial-in” the best frequency for the target fish species or conditions.
Standard Features:
Thru-Hull Transducer with High Performance Fairing Block Kit
3kW Low Frequency, 2kW High Frequency
Furuno Free Synthesizer (FFS) compatible - select any two frequencies from 38 kHz to 75kHz and 130 kHz to 210 kHz
Beam angle dependent upon frequency:
Low = 19 degrees to 10 degrees port-starboard (10 degrees to 5 degrees fore-aft)
High = 8 degrees to 4 degrees
No Connector
Designed for 40ft and above boats made of fiberglass, wood or metal
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3324.44 |
|
|
B285HW CHIRP Bronze Transducer with FB 10-Pin
High-Frequency, Wide-Beam CHIRP Transducer with Temperature - Bronze Thru-Hull with High-Speed Fairing Block.
Features:
Power: 1kW
Function: Depth, Temperature
Frequency: 150-250 kHz
Mount Style: Thru-Hull
Housing Material: Bronze
|
1493.33 |
|
|
525TID-BHD Bronze Thru-Hull Transducer with Temp and High-Speed Fairing Block
1kw
50/200 kHz with Diplexer
15x21 degree Beam Angle at 50 khz
3x5 degree Beam Angle at 200 kHz
Bronze Thru-Hull with Temperature
10-Pin Connector
Ships with High-Speed Fairing Block AIR-033-523
The Clear Choice
This new 1 kW transducer makes 600 W fishfinders perform like their more powerful big brothers especially at 50 kHz. The B258 is 25 times more sensitive that a single element 50/200 kHz transducer. How does it do it? The B258 uses Airmars new and unique ceramic-element construction. The resulting narrow beams will clearly distinguish individual fish and bottom fish from their habitat at up to 2,200 feet.
Streamlined Performance
Maximize performance by installing the B258 with our custom fit high-performance fairing. At speeds over 30 knots, screen displays show clear images and a clean bottom trace.
Supercedes B256 transducer, with significant increase in performance at 50 kHz.
Recommended for sport fishing boats above 26' (8m) and small to mid size commercial fishing boats.
Includes temperature sensor
Transducer ID option
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
960.00 |
|
|
B75M 600W Medium Frequency CHIRP Transducer 20° Tilt Single Operation Cable for 1 Transducer Install
The B75's offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel.
Specifications:
Beam: 24 to 16 Degrees Medium-Frequency
Deadrise Angle: 16 to 24 Degree
Frequency: 80-130 kHz Medium Frequency CHIRP
Material: Bronze
Maximum Depth: 900'
Sonar: CHIRP Sonar, Depth and Temperature
Type: Thru-Hull
|
939.12 |
|
|
B275LHW Bronze Thru-Hull CHIRP Transducer - 12-Pin
Bronze, Thru-Hull CHIRP Transducer with Temp, with 12-Pin Connector, Low-Freq: 42-65 kHz, High-Freq: 150-250 kHz.
The 275LH-W series transducers are truly broadband at its best. Paired with Furuno’s DFF1-UHD, the B275LH-W provides a high frequency range of 150-250Khz and a constant 25° beamwidth. The “W” stands for wide and that’s what the B275LH-W really delivers. Unlike traditional high frequency (200kHz) transducers that provide narrow performance, this unique, new wide beam/high frequency design achieves over six times the coverage under the boat compared to standard high-frequency CHIRP Transducers.
The B275LH-W is also compatible with the FCV295 and FCV1150 variable frequency Fish Finders, providing the same frequency range with a 25° wide beamwidth provided at every frequency.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2240.00 |
|
|
Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (10-Pin)
600 Watts
50/200 kHz
40/10 degree Beam Angles
Bronze Thru-Hull with Speed and Temperature
30 Foot Cable with 10-Pin Connector
High-Speed Fairing Block Included
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
480.00 |
|
|
Bronze Stem Thru-Hull Medium Frequency CHIRP Transducer - 600W & 80-130kHz
Echonautics presents a range of powerful transducers from Dual Frequency CW to Low/Medium/High CHIRP and digital sensors, with excellent value for money.
Technical Specifications:
Frequency 80-130kHz
600W
Mounting Style - Thru-Hull
Bronze Stem
|
633.13 |
|
|
Bronze Stem Thru-Hull Medium Frequency CHIRP Transducer - 1kW & 85 - 135kHz
Echonautics presents a range of powerful transducers from Dual Frequency CW to Low/Medium/High CHIRP and digital sensors, with excellent value for money.
Technical Specifications:
Frequency 85-135kHz
1kW
Mounting Style - Thru-Hull
Bronze Stem
|
914.87 |
|
|
Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (8-Pin)
600 Watts
50/200 kHz
40/10 degree Beam Angles
Bronze Thru-Hull with Speed and Temperature
30 Foot Cable with 8-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
426.67 |
|
|
Bronze Low-Profile Thru-Hull Medium-Frequency CHIRP Transducer - 300W, 0° Tilt, 95-155kHz
Echonautics presents a range of powerful transducers from Dual Frequency CW to Low/Medium/High CHIRP and digital sensors, with excellent value for money.
Technical Specifications:
Frequency - 95-155kHz
300W
Mounting Style - Thru-Hull
Material - Bronze
0° Tilt
|
335.74 |
|