|
R109LH Urethane Chirp Thru-Hull with Temp & High Speed Fairing Block - No Connector
Transducer Features:
Airmar R109 Housing Style Transducer
The Broadband R109 operates at any frequency between 38 kHz to 75kHz and 130 kHz to 210 kHz. Adjusting the frequency allows you to change the R109's beamwidth and depth capabilities. For example if you are bottom fishing in 61 m (200') of water, the narrow high-frequency beam will display extreme bottom detail and fish holding tight to structure. If you are tuna or marlin fishing in deep blue water, the wider, low-frequency beam will not only give deep-water bottom detail, but more importantly show you more of what is around your vessel, including bait which may attract game fish.
Because the R109 has a bandwidth that covers a continuous frequency spectrum, next generation Fish Finders utilizing Furuno Free Synthesizer (FFS) technology can be made “tunable”, so fishermen can “dial-in” the best frequency for the target fish species or conditions.
Standard Features:
Thru-Hull Transducer with High Performance Fairing Block Kit
3kW Low Frequency, 2kW High Frequency
Furuno Free Synthesizer (FFS) compatible - select any two frequencies from 38 kHz to 75kHz and 130 kHz to 210 kHz
Beam angle dependent upon frequency:
Low = 19 degrees to 10 degrees port-starboard (10 degrees to 5 degrees fore-aft)
High = 8 degrees to 4 degrees
No Connector
Designed for 40ft and above boats made of fiberglass, wood or metal
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3324.44 |
|
|
525TID-BHD Bronze Thru-Hull Transducer with Temp and High-Speed Fairing Block
1kw
50/200 kHz with Diplexer
15x21 degree Beam Angle at 50 khz
3x5 degree Beam Angle at 200 kHz
Bronze Thru-Hull with Temperature
10-Pin Connector
Ships with High-Speed Fairing Block AIR-033-523
The Clear Choice
This new 1 kW transducer makes 600 W fishfinders perform like their more powerful big brothers especially at 50 kHz. The B258 is 25 times more sensitive that a single element 50/200 kHz transducer. How does it do it? The B258 uses Airmars new and unique ceramic-element construction. The resulting narrow beams will clearly distinguish individual fish and bottom fish from their habitat at up to 2,200 feet.
Streamlined Performance
Maximize performance by installing the B258 with our custom fit high-performance fairing. At speeds over 30 knots, screen displays show clear images and a clean bottom trace.
Supercedes B256 transducer, with significant increase in performance at 50 kHz.
Recommended for sport fishing boats above 26' (8m) and small to mid size commercial fishing boats.
Includes temperature sensor
Transducer ID option
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
960.00 |
|
|
B785M Bronze Thru-Hull Chirp Transducer with High Speed Fairing Block
Features:
Frequency: Chirp 80 - 130 kHz
Power Rating: 600 Watts
Connector: 10 Pin
Fairing Block: High Speed Fairing Block Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
960.00 |
|
|
B285M Medium-Frequency CHIRP Transducer with Temperature - Bronze Thru-Hull with High Speed Fairing Block
Features:
Frequency: Chirp 85 - 135 kHz
Power Rating: 1 KW
Connector: 10 Pin
Fairing Block: High Speed Fairing Block Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1386.67 |
|
|
Bronze Thru-Hull, Digital Depth and High-Precision Temp Sensor, with 7 Inch Stem and High Speed Fairing Block (7-Pin)
Features:
200 Watts
235 kHz
Bronze Thru-Hull with 7" Stem
Depth and High-Precision Temperature ( + / - .02 degree )
10-Meter Cable with 7-Pin Connector
Fairing Block and Installation Materials Included
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
883.63 |
|
|
Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (10-Pin)
600 Watts
50/200 kHz
40/10 degree Beam Angles
Bronze Thru-Hull with Speed and Temperature
30 Foot Cable with 10-Pin Connector
High-Speed Fairing Block Included
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
480.00 |
|
|
Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (8-Pin)
600 Watts
50/200 kHz
40/10 degree Beam Angles
Bronze Thru-Hull with Speed and Temperature
30 Foot Cable with 8-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
426.67 |
|
|
B265LM Bronze CHIRP Thru-Hull Depth & Temp
Features:
Depth/Temp
Thru-Hull
Hull Deadrise = 0º to 20º
CP450C Plug on Cable
Bronze
Frequency: L=42-65 kHz, M=85-135 kHz
Power: 1kW
Low: 25 to 16 degree beamwidth
Medium: 16 to 11 degree beamwidth
Hull type: fiberglass or wood
|
1971.18 |
|
|
B258, SS258 High Speed Fairing Block
Airmar High Speed Fairing block for B258, SS258 Style TransducerThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
144.49 |
|
|
R109LHW Low High Wide Chirp Thru-Hull Transducer with Fairing Block - No Connector
Get more coverage under the boat with Airmar’s unique wide-beam, low- and high-frequency, Chirp-ready R109LHW. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25-degree beam for all frequencies, which results in superior resolution. The constantly wide beam provides twice the coverage and clear fish arches on the display compared to most high-frequency, narrow-beam transducers.
The high-wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essentially down to 152 m (500'). The low-frequency band and 2 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s Chirp-ready transducer with wide-beam coverage.
Features:
Depth and fast-response water-temperature sensing
2 kW of power for excellent deep-water performance from the low-frequency
2 kW low frequency (38 to 75 kHz): 19 to 10-degree port-starboard beamwidth; 10 to 5-degree fore-aft beamwidth
Maximum depth of 1829 m (6000')
1kW high frequency (150 to 250 kHz): 25-degree constant beamwidth; Maximum depth of 152 m (500')
137 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50, 68, and 200 kHz plus everything else in the bandwidth
High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation
High wide beamwidth yields more coverage for detecting fish in the upper-water column
Urethane housing with fairing for optimal performance
No Connector - Bare Wire
Comes with Fairing Block
Patented Xducer ID® technology
Specifications:
Acoustic Window: Epoxy/urethane
Common Use: Fishing, commercial fishing
Functions: Depth, temperature
High Frequency: 150-250 kHz
High-Wide Beamwidth: 25 degrees
Housing: Urethane
Hull Material: Compatible with all hull materials
Low-Frequency: 38-75 kHz
Low-Frequency Beamwidth: 19-10 degrees
Max Deadrise: Up to 22 degrees
Max Deadrise Angle: 22 degrees
Max Depth: Low frequency- 1829 m (6000'), High wide frequency- 152 m (500')
Max Vessel LOA: 9 m (30') and above
Mounting Style: Thru-hull
Power Rating: 2 kW
Retractable housing: No
Single or Dual Frequency: CHIRP-ready dual-band
Tilted Element: No
Weight: 15.1 kg (33.3 lb.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3383.02 |
|
|
Bronze Broadband Thru-Hull with Temp and Hi-Speed Fairing Block, 1kW (No Plug)
526TID-HDN Thru-Hull Transducer with Broadband Technology
1 kW
50/200 kHz, no Diplexer
20/6 degree Beam Angles
Bronze Thru-Hull with Temperature
10 Meter Cable
No connector provided
Ships with High-Speed Fairing Block, # AIR-033-391
B260
MB1100 required for some applications - contact Furuno for more information
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1280.00 |
|
|
SS260 Thru-Hull Transducer - Stainless Steel - 1kW - 50/200 - No Plug
Airmar SS260 Housing Style Transducer. Stainless Steel Thru-Hull Transducer with Temp and Fairing Block, 1 kW (No Plug).
Features:
1,000 Watts Power
50/200 kHz, no Diplexer
20/6 degree Beam Angles
Stainless Steel Thru-Hull with Temperature
No Connector
High Speed Fairing Block included
Specifications:
Beam Angle: 20° and 6°
Housing Type: Stainless Steel
Power Rating: 1kW
Frequency: 50kHz and 200kHz
Install Type: Thru-Hull
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1333.33 |
|
|
B260 Bronze Broadband Thru-Hull Transducer with Temp, Built-in Diplexer and Hi-Speed Fairing Block, 1kW (10-Pin)
526T-HDD Bronze Thru-Hull Transducer with Broadband Technology
1,000 Watts Power
50/200 kHz with Diplexer
20/6 degree Beam Angles
Bronze Thru-Hull with Temperature
10-Pin Connector
Ships with High-Speed Fairing Block, # AIR-033-391
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1493.33 |
|
|
Bronze Thru-Hull Multisensor with 7 Inch Stem, 600w (8-Pin)
600 Watts
50/200 kHz
40/10 degree Beam Angles
Bronze Thru-Hull with 7" Stem, Speed and Temperature
30 Foot Cable with 8-Pin Connector
High Speed Fairing Block Included
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
528.00 |
|
|
SS60 Stainless Steel Thru-Hull 20° Tilt, 50/200, 10-Pin
Stainless Steel Thru-Hull Transducer with Temp, 600W (10-Pin), 20° Tilted Element. If a thru-hull flush-style transducer is called for, the Tilted Element SS60-SLTD/20 will accommodate a deadrise angle between 16° and 24°. This transducer compensates for deadrise by angling the element inside the housing. The transducer is labeled with an arrow on top of the housing that should point towards the keel, whether it is installed to port or starboard. This ensures that the tilted element within the housing is given the correct orientation.
Features:
600 Watts
50/200 kHz
45/12 degree Beam Angles
Stainless Steel Thru-Hull with Temperature
30' Cable with 10-Pin Connector
|
426.67 |
|