|
Prop kits containing thrust washer, spacer, washer, nut and cotter pin. Complete kit contents depends upon application.
|
27.59 |
|
|
Prop installation hardware, sold 1 piece per package. Refer to Yamaha hardware for other spacers and washers.
|
4.59 |
|
|
Prop kits containing thrust washer, spacer, washer, nut and cotter pin. Complete kit contents depends upon application.
|
45.39 |
|
|
Prop kits containing thrust washer, spacer, washer, nut and cotter pin. Complete kit contents depends upon application.
|
47.79 |
|
|
Fits: OMC 25-35 HP 3-cyl - 1997-99. Replaces: OMC 586277. 10-tooth drive gear. Uses DVK98 2-piece replacement drive kit, SR398 repair kit.
|
189.56 |
|
|
Fits: OMC 25, 40, 50 HP; 2-cyl - 1989-Up; 48-50 HP - 1990-Up. Replaces: OMC. 583482, 585056. 9-tooth drive gear. Uses *DV389 replacement drive gear, *DVK89 2-piece drive kit (fits current-model starters), SR389 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
202.41 |
|
|
Prop kits containing thrust washer, spacer, nut and cotter pin.
|
33.49 |
|
|
Fits: OMC 20-35 HP 2-cyl - 1987-93. Replaces: OMC 583473, 585059. 9-tooth drive gear. Uses *DV390 replacement drive gear, *DVK90 2-piece drive kit (fits current-model starters) SR390 repair kit.*NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
180.50 |
|
|
Series 25 Utility Block™ - Single - Loop Head
Stainless steel cheeks and Acetal sheaves ensure a long service life with virtually no maintenance. Hollow rivets in the block heads can be fitted with shackles, which can also be used to add a becket for extra purchase.
Features:
Lightweight durable construction
Economical
Maintenance free
Applications:
Vang, cunningham and trapeze retriever systems on dinghies
Leech line tackles, bunk adjusters, etc on larger boats
Materials:
U.V. stabilized acetal sheaves
Grade 316 Stainless Steel cheeks
Specifications:
Sheave Ø: 25mm(1")
Max. Rope Ø: 6mm(1/4")
M.W.L.: 300kg(660lbs)
B. L.: 600kg(1,320lbs)
Weight: 15g(0.5oz)
|
9.68 |
|
|
Series 25 Utility Block™ - Single - Swivel Shackle Head
Stainless steel cheeks and Acetal sheaves ensure a long service life with virtually no maintenance. Hollow rivets in the block heads can be fitted with shackles, which can also be used to add a becket for extra purchase.
Features:
Lightweight durable construction
Economical
Maintenance free
Applications:
Vang, cunningham and trapeze retriever systems on dinghies
Leech line tackles, bunk adjusters, etc on larger boats
Materials:
U.V. stabilized acetal sheaves
Grade 316 Stainless Steel cheeks
Specifications:
Sheave Ø: 25mm(1")
Max. Rope Ø: 6mm(1/4")
Pin Ø: 4mm(5/32")
M.W.L.: 150kg(330lbs)
B. L.: 300kg(660lbs)
Weight: 20g(0.7oz)
|
15.42 |
|
|
Series 25 T-Track - Composite Slide - 102mm(4")
For small keel boats and sportsboats T-track jib leads are a great blend of performance and functionality in a simple, efficient package. Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment.
Lightweight
Composite jib lead cars continue the design philosophy of the award winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fibre equivalents. The car design has been modelled and optimised using finite element analysis and rapid prototyping techniques to achieve maximum strength-to-weight characteristics. Orbit Block™ models use a Dyneema® Link which is 10 times stronger and lighter than steel, to provide the articulated connection between block and car.
Integrated Functionality
The clever 2-piece car body is molded from a composite material that delivers low friction on the alloy track without the need for separate inserts. It also provides the required mechanical strength without the weight and corrosion drawbacks of metal parts. An integrated becket at the forward end of the car suits 2:1 sheet systems and the removable threaded pin allows easy fitting of alternate blocks and accessories.
Low Profile and Compact
Sleek styling and the positioning of the attachment pin provide a low lead aft for the lead block. The Dyneema® Link allows full articulation. The plunger stop button has a flush finish and the contoured form of the car eliminates the chance of lines and sails becoming snagged.
Precise Adjustment
The ergonomic plunger stop toggle combined with low friction of the car body allows for easy one-handed adjustment. The toggle is located at the rear of the car for easy access from the cockpit on sports boats and small keel boats. An arrow is located on the side to indicate the position of the stop for repeatable settings. A 'Racing' track has 25mm(63/64") stop hole spacing for even more precise control of the car position and sheeting angle.
Features:
Low profile and lightweight
Removable attachment pin to suit either Dyneema® Link or a shackle
Integrated becket for 2:1 headsail sheet systems
Applications:
Headsail sheet leads on boats up to 8M (26').
Materials:
Toughened, glass fibre reinforced Nylon slide.
DSpecifications:
Length: 102mm(4")
M.W.L.: 500kg(1,100lbs)
B. L.: 1,000kg(2,200lbs)
Weight: 107g(3.8oz)
|
31.75 |
|
|
Series 25 T-Track - Composite Slide - Series 40 BB Orbit Block? 153; - Stand Up - Suits 9mm(5/16") Rope
For small keel boats and sportsboats T-track jib leads are a great blend of performance and functionality in a simple, efficient package. Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment.
Lightweight
Composite jib lead cars continue the design philosophy of the award winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fiber equivalents. The car design has been modelled and optimised using finite element analysis and rapid prototyping techniques to achieve maximum strength-to-weight characteristics. Orbit Block™ models use a Dyneema® Link which is 10 times stronger and lighter than steel, to provide the articulated connection between block and car.
Integrated Functionality
The clever 2-piece car body is molded from a composite material that delivers low friction on the alloy track without the need for separate inserts. It also provides the required mechanical strength without the weight and corrosion drawbacks of metal parts. An integrated becket at the forward end of the car suits 2:1 sheet systems and the removable threaded pin allows easy fitting of alternate blocks and accessories.
Low Profile and Compact
Sleek styling and the positioning of the attachment pin provide a low lead aft for the lead block. The Dyneema® Link allows full articulation. The plunger stop button has a flush finish and the contoured form of the car eliminates the chance of lines and sails becoming snagged.
Precise Adjustment
The ergonomic plunger stop toggle combined with low friction of the car body allows for easy one-handed adjustment. The toggle is located at the rear of the car for easy access from the cockpit on sports boats and small keel boats. An arrow is located on the side to indicate the position of the stop for repeatable settings. A 'Racing' track has 25mm(63/64") stop hole spacing for even more precise control of the car position and sheeting angle.
Features:
Low profile and lightweight
Removable attachment pin to suit either Dyneema® Link or a shackle
Integrated becket for 2:1 headsail sheet systems
Applications:
Headsail sheet leads on boats up to 8M (26').
Materials:
Toughened, glass fibre reinforced Nylon slide.
DSpecifications:
Length: 102mm(4")
M.W.L.: 325kg(715lbs)
B. L.: 700kg(1,540lbs)
Weight: 144g(5.1oz)
|
72.32 |
|
|
Series 25 T-Track - Spinnaker Pole - Composite Slide & Stop - 102mm (4")
For small keel boats and sports boats, T-Track jib lead and spinnaker pole slides are a great blend of performance and functionality in a simple, efficient package. Composite slide bodies with plunger stops run on an anodized aluminium track, and allow quick and easy manual adjustment.
Specifications:
Length: 102mm
M.W.L.: 400 kg
B.L.: 800 kg
Weight: 215 g
|
119.48 |
|
|
Standard Zinc Trim Tab Anode for 25-50 HP Mercury Engines
Tecnoseal Zinc Anode for Mercury Outboard & Mercruiser Sterndrive and engines. For Trim Tab. Fits Mercury 25-50 Hp F25, F30, F40 and F50 outboards (1998 and later). Mercury Part: 822157-C2. For use in Salt water.
|
11.35 |
|
|
Standard Aluminum Trim Tab Anode for 25-50 HP Mercury Engines
Tecnoseal Aluminum Anode for Mercury Outboard & Mercruiser Sterndrive and engines. For Trim Tab. Fits Mercury 25-50 Hp F25, F30, F40 and F50 outboards (1998 and later). Mercury Part: 822157-C2. For use in Salt water.
|
6.41 |
|