|
Fits: OMC 25, 40, 50 HP; 2-cyl - 1989-Up; 48-50 HP - 1990-Up. Replaces: OMC. 583482, 585056. 9-tooth drive gear. Uses *DV389 replacement drive gear, *DVK89 2-piece drive kit (fits current-model starters), SR389 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
202.41 |
|
|
Prop installation hardware, sold 1 piece per package.
|
6.79 |
|
|
Prop installation hardware, sold 1 piece per package.
|
7.69 |
|
|
Ethernet Cable for M-Series - 25'
FLIR's 25' Ethernet Cable is for connecting the FLIR M-Series Cameras to
the Joystick Control Unit.
Features:
Double Shielded
RJ-45
LSZH
25' long
|
72.86 |
|
|
Standard Zinc Trim Tab Anode for 25-50 HP Mercury Engines
Tecnoseal Zinc Anode for Mercury Outboard & Mercruiser Sterndrive and engines. For Trim Tab. Fits Mercury 25-50 Hp F25, F30, F40 and F50 outboards (1998 and later). Mercury Part: 822157-C2. For use in Salt water.
|
11.35 |
|
|
Standard Aluminum Trim Tab Anode for 25-50 HP Mercury Engines
Tecnoseal Aluminum Anode for Mercury Outboard & Mercruiser Sterndrive and engines. For Trim Tab. Fits Mercury 25-50 Hp F25, F30, F40 and F50 outboards (1998 and later). Mercury Part: 822157-C2. For use in Salt water.
|
6.41 |
|
|
Prop kits containing thrust washer, spacer, washer, nut and cotter pin. Complete kit contents depends upon application.
|
27.59 |
|
|
Fits: OMC 20-35 HP 2-cyl - 1987-93. Replaces: OMC 583473, 585059. 9-tooth drive gear. Uses *DV390 replacement drive gear, *DVK90 2-piece drive kit (fits current-model starters) SR390 repair kit.*NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
180.50 |
|
|
C-Series Solar Charge Controller - 60 Amps
PV charge, diversion and load controller
The C35 and C60 are field configurable for 12 V and 24 V operation. The C40 may be configured for 12 V, 24 V, or 48 V operation. C35, C40 and C60 charge controllers can be used as a charge, diversion, or load controller and come with a standard multi-color charge status LED face plate.
A Controller for Virtually any DC Charging Source. The C60 is a fully solid state, microprocessor-driven controller that is UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs.
Silent Microprocessor Control-All C Series controllers have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently.
Features:
Improve battery life with pulse width modulated (PWM) multi-stage temperature compensated charging
Two-year standard warranty
PV charge, diversion, load controller
Available remote display with cumulative AMP hours
Electronic protection against short-circuit, overload, and over-temperature conditions
Tolerance to hostile environments with conformal-coated boards and powder-coated enclosure
Field adjustable voltage and battery set point
Automatically disconnects from the battery at night
Compatible with negative ground and ungrounded systems
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
162.91 |
|
|
Prop kits containing thrust washer, spacer, nut and cotter pin.
|
46.49 |
|
|
Prop kits containing thrust washer, spacer, washer, nut and cotter pin. Complete kit contents depends upon application.
|
64.89 |
|
|
Prop kits containing thrust washer, spacer, washer, nut and cotter pin. Complete kit contents depends upon application.
|
51.79 |
|
|
STA-RITE C105-236PC IMPELLER MPRA SERIES 1.5 HP
|
61.88 |
|
|
Series 25 Utility Block™ - Single - Loop Head
Stainless steel cheeks and Acetal sheaves ensure a long service life with virtually no maintenance. Hollow rivets in the block heads can be fitted with shackles, which can also be used to add a becket for extra purchase.
Features:
Lightweight durable construction
Economical
Maintenance free
Applications:
Vang, cunningham and trapeze retriever systems on dinghies
Leech line tackles, bunk adjusters, etc on larger boats
Materials:
U.V. stabilized acetal sheaves
Grade 316 Stainless Steel cheeks
Specifications:
Sheave Ø: 25mm(1")
Max. Rope Ø: 6mm(1/4")
M.W.L.: 300kg(660lbs)
B. L.: 600kg(1,320lbs)
Weight: 15g(0.5oz)
|
9.68 |
|
|
Series 25 Utility Block™ - Single - Swivel Shackle Head
Stainless steel cheeks and Acetal sheaves ensure a long service life with virtually no maintenance. Hollow rivets in the block heads can be fitted with shackles, which can also be used to add a becket for extra purchase.
Features:
Lightweight durable construction
Economical
Maintenance free
Applications:
Vang, cunningham and trapeze retriever systems on dinghies
Leech line tackles, bunk adjusters, etc on larger boats
Materials:
U.V. stabilized acetal sheaves
Grade 316 Stainless Steel cheeks
Specifications:
Sheave Ø: 25mm(1")
Max. Rope Ø: 6mm(1/4")
Pin Ø: 4mm(5/32")
M.W.L.: 150kg(330lbs)
B. L.: 300kg(660lbs)
Weight: 20g(0.7oz)
|
15.42 |
|