|
Globe Impeller 200
Globe Impeller Model 200 Replaces the following impellers
Ancor JP50015
CEF 500245
Detroit Diesel 5198550
Jabsco 18376-0001, 6760-0001
Johnson Pump 09-802B, 802B
Sierra Marine 18-3304
Volvo Penta 842857, 844683, 845796
Weight: 0.6 lbs.
Od (in/mm): 3 3/4" / 95
Width (in/mm): 3 1/2" / 90
Shaft Size (in/mm): 1" / 25
Drive Type: 12 pt Spline
Core Type: Composite
Number of Blades: 9
Silhouette Letter: O
Fuel Type: Water
|
87.45 |
|
|
B619 20° Tilt Bronze Thru-Hull Transducer - 8-Pin
Minimize Your Drag
The B619 model have been the standard in low-profile models for many years. Their large sensitive ceramics allow deep echosounding up to 206M (700'). These nearly flush units minimize drag as only 5mm (2/10") of the housing extends outside of the hull. The bronze B619 provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for moreaccurate depth readings.
Applications:
Cruising powerboats and sailboats
Sailboats
Features:
Depth only or Depth and temperature
Fixed 20° tilted versions for 16° to 24° hull deadrise
Right angle cable exit offers low headroom and protection when transducer is stepped on
Included rubber washer allows tightening of the hull nut to irregular hull surfaces
Housings are ABYC H-27 compliant
Optional temperature sensor
Bronze housing
Boat Size: Up to 9M (30')
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
197.99 |
|
|
B45 Bronze Thru-Hull with Fairing Block - 50/200 kHz - 600W - 9-Pin Connector (xSonic)
The B45 is Airmar’s smallest and most economical, dual-frequency, bronze, stem transducer. It features a single, 50/200 kHz ceramic element. The included fairing streamlines the transducer and increases the performance—even at higher speeds.
Features
The depth and fast-response water-temperature sensing
600 W of power
Dual-frequency element:
50 kHz with a wide 45° beamwidth for depth performance to 353 m (1200')
200 kHz with a 12° beamwidth for depth performance to 206 m (700')
Excellent performance and sensitivity in a small housing
Bronze housing with High-performance Fairing for optimal performance at speed
Specifications
Acoustic Window: Urethane
Cable-Length: 10 m (33')
Common Use: Cruising/Racing Sailboats, Leisure/Yachting, Fishing
Connector: Simrad 9-Pin, Lowrance 9-Pin, Navico 9-Pin
Conventional Beam: 45°/12°
Country of Origin: USA
Cross Reference: 000-13946-001
Deadrise Range: Up to 28° with fairing
Display Connector: 9N
Frequency Band: 50/200 kHz
Hole Size: 22 mm (7/8")
Housing Material: Bronze
Hull Material: Fiberglass or wood
Max Deadrise: Up to 26° with fairing
Max Deadrise Angle: 26°
Max Depth: Low frequency- 366 m (1200'), High frequency- 206 m (700')
Max Vessel LOA: Up to 9 m (30')
Mix and Match Series: 5-Pin 600 Watt
Mounting Style: Thru-Hull with Fairing
Power Rating: 600 W
Sensor Connector: MM
Single or Dual Frequency: Conventional Dual Frequency
Tilted Element: No
Transducer Functions: Depth, Temperature
Usable Shaft Length: 92 mm (3.62")
Weight: 2.5 kg (5.5 lb.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
336.82 |
|
|
Tilted Element™ Thru-Hull
Minimize Your Drag
The B619 model have been the standard in low-profile models for many years. Their large sensitive ceramics allow deep echosounding up to 206M (700'). These nearly flush units minimize drag as only 5mm (2/10") of the housing extends outside of the hull. The bronze B619 provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for moreaccurate depth readings.
Applications
Cruising powerboats and sailboats
Sailboats
Features
Depth only or Depth and temperature
Fixed 12° tilted versions for 8° to 15° hull deadrise
Right angle cable exit offers low headroom and protection when transducer is stepped on
Included rubber washer allows tightening of the hull nut to irregular hull surfaces
Housings are ABYC H-27 compliant
Optional temperature sensor
Bronze housing
Boat Size: Up to 9M (30')
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
197.99 |
|
|
HDI 83/200 455/800 Skimmer Transducer
Works w/ Elite-7 combo and fishfinder models, plus HDS Gen2 Touch fishfinder and combo models
HDI Skimmer transducer 83/200/455/800kHz with built in temp. Includes mounting bracket and hardware. Cable Length 6m (20ft)
Hybrid Dual Imaging (HDI) transducer (83/200/455/800) - The power of two award-winning technologies -- Broadband Sounder PLUS Exclusive DownScan Imaging-- combined to provide the best-possible view beneath your boat.
|
113.42 |
|
|
B285HW CHIRP Bronze Transducer with FB 10-Pin
High-Frequency, Wide-Beam CHIRP Transducer with Temperature - Bronze Thru-Hull with High-Speed Fairing Block.
Features:
Power: 1kW
Function: Depth, Temperature
Frequency: 150-250 kHz
Mount Style: Thru-Hull
Housing Material: Bronze
|
1493.33 |
|
|
Humminbird 9-Pin Mix & Match Chirp Cable - 1M
Airmar's Mix & Match Chirp Cable for Humminbird
Features:
Length: 1M
9-Pin
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
114.00 |
|
|
Plastic White Thru-Hull With Strainer - 3/4" Inner Diameter
The Thru-Hull Connector with Strainer prevents clogging of the aerator pump. Also, the strainer attaches to threads that extend beyond the external retaining nut.
Specifications:
Hose Size: (inch) 3/4" inner diameter
Max Hull Thickness: (inch) 1-7/16"
Installation Hole Size: (inch) 1-1/16" to 1-1/8"
Construction: Acetal
*Do not use the strainer as a thru-hull connector nut replacement
|
12.74 |
|
|
Programming Cable w/USB Connectors
PC to Handheld programming Cable with USB connector for radios with 2-pin connectors
|
68.40 |
|
|
LAN Cable Assembly - 5M RJ45 x RJ45 4P
Furuno's LAN Cable Assembly is designed to connect your NavNet 3D/TZT to your PC. This 5 meter cable comes with RJ45-RJ45 connectors.
Features:
LAN Cable
Designed for NavNet 3D/TZT to PC
Length: 5M
Connectors: RJ45 - RJ45 (2 Pair)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
70.91 |
|
|
B164 1kW 20° Thru-Hull Transducer with Blue Connector
Step up to a 1kW - Without a Fairing!Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all.
Low-profile protrusion below the hull - no affect on your boats running performance
The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW (1,000 Watts) RMS Power
Frequency: 50/200 kHz
Cone: 50 kHz - 22° x 20° / 200 kHz - 6° x 6°
Maximum Depth Range: 50 kHz - 353M to 529M (1,200' to 1,800') / 200 kHz - 152M to 235M (500' to 800')
Engineered for center-console and trailered boats
Interfaces to any 600W or 1 kW echosounder
Bronze (B164) Housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Usable Shaft Length: 71mm (2.80")
Fixed 20° tilted version for 16° to 24° hull deadrise
10M Cable included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
xSonic SS175H-W/12 Stainless Steel Thru-Hull Transducer - 12° - 9-Pin
The SS175H-W is a stainless steel, thru-hull CHIRP transducer, ideal for sportfishing and commercial vessels up to 8M (25') in size. This single-channel transducer offers High CHIRP combined with a wide beam for the best resolution and coverage in shallower depths.
Features:
130-210 kHz High CHIRP with wide 25° beam for excellent fish targets
Up to 310M (1000') range with High CHIRP
1 internal broadband ceramic
Thru-hull with stainless steel housing
Suitable for fiberglass and wood hulls
Ideal for sportfishing and commercial vessels up to 8M (25')
Recommended for use with Simrad NSSevo3 Lowrance HDS Gen3 multifunction displays
|
1458.80 |
|
|
Lowrance 9-Pin HD+ Sonar Adapter Cable Compatible with Tour & Tour Pro HD+
Features:
Provides clear 83/200 455/800 kHz HD views beneath the trolling motor
Only for use with Tour or Tour Pro HD+ enabled motors
Compatible with Lowrance HDS and Elite Ti2 units with black 9-Pin Xsonic transducer port
Not compatible with Xi Series motors
|
49.98 |
|
|
Gianneschi BMA 50/160 B1 Motor and Pump 230V 1Ph
Gianneschi catalog # BMA-50/160-B1-230V-, BMA Series Self Priming Centrifugal Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 2.2 KW (3 Horsepower), 2900 RPM, 230 volts AC, 50/60 Hz, Single Phase.
Applications for the BMA50/160B1230V include chain washing, air conditioners, emptying operations, bilges, cooling systems, OEM, fire fighting, ballasts, gray water systems, as well as swimming pool filling.
|
4800.04 |
|
|
Airmar P79 Adjustable 200/50kHz Plastic In-hull Transducer (8-pin)
010-10327-20
This entry level in-hull transducer with an adjustable deadrise angle makes installation a snap.
The 8-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 22 degree deadrise.
Transducer kit comes with installation instructions*. Follow the instructions carefully to avoid damaging your boat.
*Fiberglass should be no more than 5/8" thick. Not recommended for cored hulls.
When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
168.41 |
|