Kit OB - Hose Kit for Single Station Installation Consists of a pair of high pressure hoses supplied with preassembled fittings on both ends. Length: 28 Feet Fittings: ORFS

Kit OB - Hose Kit for Single Station Installation Consists of a pair of high pressure hoses supplied with preassembled fittings on both ends. Length: 30 Feet Fittings: ORFS

AMT Pump 5760-95 1Hp 2"Npt 115V CI-SS Submersible Shredder Sewage Pump 5760-95, 130 GPM, 1.0 HP, Carbide Tipped Cast Iron construction with stainless steel motor housing 1.0 HP, 14 Amps, 115 volts, continuous duty, single phase electric motor Can handle solids up to 1 inch Triplex seal system 2 inch output port with a discharge rate of 7800 gallons per hour The AMT by Gorman-Rupp 5760-95 is an industrial grade shredder sewage pump that is designed to handle sludge and dirty water applications.  Features an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging when pumping sludge type waste.  Liquid content still must be above 85% to keep from damaging the pump and possibly void the warranty.

AMT Pump 2P7XZR Hatz Diesel Fire Pump 2" Engine Driven Portable High Pressure pump is cast aluminum construction with cast iron volute and male NPT ports. Pump applications include fire protection and irrigation. These pumps are available with a wide choice of standard and heavy duty gasoline or diesel fueled engines. These pumps feature high efficiency closed cast aluminum impeller. All models come equipped with EPDM/EPR elastomers and seals. Most models include a heavy duty steel roll frame.   Features Removable/Replaceable Cast Iron Suction & Discharge Flanges Discharge Port Rotates in 90 Increments One Tool Serviceability, Tool Included with Engine Driven Models (Not with Kits) Includes Strainer and Rubber Foot Mounting Maximum Temperature 180 F Specifications Type: High Pressure Pumps Series: 2" Engine Driven Portable High Pressure Pumps Driver: Hatz Diesel 1B30 Seal Type & Elastomer/Faces: EPDM/EPR/CAR/CER Tank Size (Gal/Ltr): 1.32 / 5.0 Run Time (Hr.): 2.7 Mounting: Roll Cage HP: 5 HP SUCTION: 2" NPT DISCHARGE: 2" NPT L 31" X W 22.5" X H 23.6" Warranty: 1 Year   Product images are a representation only

Tire Pressure Monitoring System - 2 Sensor Package Monitor the air pressure and temperature of up to 22 tires in real-time with the iN•Command® Tire Pressure Monitoring System. The waterproof sensors use Bluetooth technology to communicate important safety information right to your smart device with the iN•Command TPMS App.  Just open the Apple or Android App to assign a sensor to each tire by scanning the QR code with your device's camera to receive audible alerts. Features: Works with RVs, Trailers, Passenger Vehicles, and More Each Tire can be Monitored Individually for Pressure and Temperature (F° or C°)  Ability to Monitor up to 22 Tires at Once w/ the iN-Command app Lets you Access Tire Pressure and Temperature History Free App is Available on Android and Apple Smartphones Pressure monitoring range: 0 to 185 PSI In the Box: Two (2) Bluetooth-Enabled Tire Pressure Monitoring Sensors w/ Locking Anti-Theft Bolts Two (2) 3V - CR1632 Batteries  Installation Wrench Instruction Manual *Sold as an Individual 

The US Coast Guard issued a safety alert advising of a potential problem involving certain ANSUL – High Pressure Carbon Dioxide Fire Extinguishing Systems. There have been several instances where this system has discharged without human intervention. The manufacturer has identified the suspect CO2 cylinder valves as those having a date code between 10-07 and 06- 08. Owners, operators, and masters of ships having such ANSUL systems should immediately check the dates on the CO2 cylinder valves and notify ANSUL if the date code is within the suspect range. Safety Alert 05-09

AMT Pump MSV3-5-1P Multistage Mtr/Pmp 1Hp 115v Multi-Stage Booster Pump – MSV3-5-1P, 5-Stage, 115-208-230 Volts NEMA 56C, Dual Cycle 50 and 60 Hz, 1.0 HP, single phase, Totally Enclosed, Fan Cooled motor Recommended to operate at or below the Best Efficient Point which is at 16 GPM and a Max Total Head of 105 feet Cast Iron base and adapter 1 inch NPT cast iron flanges 304 series stainless steel components with Teflon wear rings EPDM-Tungsten Carbide Seal that is easy to remove and replace The AMT MSV3-5-1P is a non-self-priming/gravity feed, industrial pump with high pressure and low output.  This unit is more commonly referred to as a jockey pump and is often installed for water transfer uses where no suction lift is required such as boiler feed, condensate return, high pressure washdown, irrigation, booster service, and fire protection/sprinkler systems.  These pumps have NOT been investigated for use in drinking water systems.  

Amt 2852-K5 1 1/4X1 1/4 CI Self Primer Pump Kit  

Amt 2853-K5, 1 1/4X 1 1/4 CI Self Primer Pump Kit

Amt 2855-K5 1 1/4X1 1/4 CI Self Primer Pump Kit

AMT 2856-K5, 1 1/4X1 1/4 CI Self Primer Pump Kit

AMT 2857-K5, 1 1/4X1 1/4 CI Self Primer Pump Kit

LPG (Propane) Low Pressure Hose Conversion Kit Used in conjunction with a low pressure valve, this kit allows you to connect your Magma gas grill to any pre-regulated, on-board, low pressure LPG (propane) fuel system.   *Must be used with Magma Valve  In the Box: One (1) Brass 3/8" flare fitting One (1) Safety shut-off valve 10' (3 M) Hose *Sold as an Individual 

XPS Hose Kit - 7' This Panther hose kit is needed for the Panther XPS System. Features: The low-pressure hose is 12 in. longer to allow for uninterrupted travel when connected to the cylinder actuator 7 ft. – 1/4 in. Hi-Pressure Hose  8 ft. – 5/16 in. Return Hose Includes: Contains two hoses high pressure and low pressure—with fittings

XPS Hose Kit - 6' This Panther hose kit is needed for the Panther XPS System. Features: The low-pressure hose is 12 in. longer to allow for uninterrupted travel when connected to the cylinder actuator 6 ft. – 1/4 in. Hi-Pressure Hose  7 ft. – 5/16 in. Return Hose Includes: Contains two hoses high pressure and low pressure—with fittings