|
Micropump 101-955 Pump & Air Motor
Gast 1Am-Nrv-82 Lubricated Air Motor Pump
|
3184.96 |
|
|
Micropump DV955.A Air Motor with A Mount
The DV-955.A is a 5-80 psi, 500-10,000 RPM, Air Vane Drive for the GA, GB, GJ, and CA series pumps.
|
2500.42 |
|
|
Micropump GJ-N21.PF1S.G-B1 Pump Head G Mount
The GJ 83038 delivers exceptional pumping performance for any high-precision application. These compact, magnetically driven gear pumps feature a cavity style design with no dynamic seals for applications that cannot tolerate leaks. With benefits like chemical resistance, abrasive fluids pumping, smooth, pulseless delivery, and reverse pumping - GJ Series pumps are available with a wide range of options, as well as in standard and OEM configurations.
Displacement:
0.316 ml/rev (N21)
0.64 ml/rev (N23)
0.91 ml/rev (N25)
1.23 ml/rev (N27)
Recommended Speed Range: 500-5500 RPM
Flow Rate (min): 158 mL/min | 2.5 US gal/hr
Flow Rate (max): 6.8 L/min | 1.8 US gpm
Differential Pressure (max): 5.5 bar | 80 psi
System Pressure (max): 21 bar | 300 psi
Temperature Range: -46 to 121 °C | -50 to 250 °F
Viscosity Range: 0.5 to 1500 cP
Standard Ports: 1/8"-27 NPT(F)
Model: GJ-N21.PF1S.G-B1
|
1217.81 |
|
|
Micropump DC306.A 81101 24Vdc Motor A Mount
The DC-306.A is an intermittent duty, 0-24VDC, Brush Type, Permanent Magnet Drive for the GA, GB, and GJ (N21,N23,N25) series pumps.
Drive Type: Brush
Speed (min): 500 RPM
Speed (max): 4000 RPM
Power Source: 24 VDC
Mount: A-Mount
Speed Control: Input Voltage
Connection: Wire Leads
Enclosure: TENV
Torque (max): 211.85 mNm 30 oz-in
Power (max): 67 W
|
1939.94 |
|
|
Shurflo 8000-955-280 Pump 24V 80Bp Nes 2.0S
Diaphragm Pump with 24 Volt DC Motor and Bypass. Nylon Pump Body, EPDM Valves, Santoprene Diaphragm. Inlet Port is 3/8 Inch NPT, Discharge Port is 3/8 Inch NPT.
Features :
Pump Body:Nylon
Impeller:EPDM Shaft:Santoprene
Port Size:Inlet Port is 3/8 Inch NPT, Discharge Port is 3/8 Inch NPT.
Motor Specs :24 Volt DC. Wire: 12.5 Inch x 16AWG wires with Switch.
|
180.87 |
|
|
Micropump 5666 Bypass Poppet
Micropump PN 5666 – Bypass Poppet, is the poppet used in the internal bypass in Micropump GB Series pumps. The materials of construction for this part number are PPS (with carbon fiber and PTFE) and the part is injection molded by Micropump.
PN 5666 – Poppet, Bypass
Material – PPS (with carbon fiber and PTFE)
Weight – approximately 0.18g
|
9.60 |
|
|
Micropump GA-V23.C8FS.C Pump Head C Mount
Micropump Low-flow pump head, pressure-loaded, 0.084 mL/revolution
Max Flow Rate (mL/min): 672
Flow Rate (mL/rev): 0.084
Min Flow Rate (mL/min): 12.6
Differential Pressure (PSI): 40
Differential Pressure (bar): 2.8
Max Motor RPM (rpm): 8000
Seal Material: PTFE
Body Material: 316 SS
Gear Material: Carbon graphite
Relief Valve: No
Run Dry: Under 30 seconds
Duty Cycle Continuous: Yes
Particulates: No
Max Temperature ( F): 350
Min Temperature ( F): -50
Max Temperature ( C): 177
Min Temperature ( C): -46
Max Viscosity (cP): 100
Model Number: GA-V23.C8FS.C
Part Number: 82117
|
1147.03 |
|
|
Micropump DC331AC 12Vdc Motor with C Mount
The DC-331A.C is an intermittent duty, 0-12VDC, Brush Type, Permanent Magnet Drive for the GA and GJ (N21) series pumps.
|
1664.21 |
|
|
Micropump DJ605A 115V Motor A Mount
The DJ-605.A is a continuous duty, 115 VAC, 3450 RPM, Shaded Pole Drive for the GA, GB, GJ, and CA series pumps.
Drive Type: Shaded Pole
Speed (min): 3450 RPM
Speed (max): 3450 RPM
Power Source: 115 VAC
Mount: A-Mount
Speed Control: None
Connection: Cord & Plug
Enclosure: TEFC
Torque (max): 127.11 mNm 18 oz-in
Power (max): 37 W
Frequency: 50/60 Hz
Product Number: 20070
|
2557.85 |
|
|
Micropump DP415A 115Vac Motor A Mount
The DP-415.A is an intermittent duty, 115 VAC, Universal Drive for the GA, GB, GJ, and CA series pumps.
Drive Type: Universal
Speed (min): 500 RPM
Speed (max): 9000 RPM
Power Source: 115 VAC
Mount: A-Mount
Speed Control: Manual
Connection: Cord & Plug
Enclosure: Open, Drip Proof
Torque (max): 91.80 mNm 13 oz-in
Power (max): 67 W
Frequency: 50/60 Hz
Product Number: 83433
|
2837.30 |
|
|
Micropump DC332A.C 24Vdc Motor with C Mount
The DC-332A.C is an intermittent duty, 0-24VDC, Brush Type, Permanent Magnet Drive for the GA and GJ (N21) series pumps.
|
3197.59 |
|
|
Micropump DC361C 24Vdc Motor C Mount
The DC-361.C is an intermittent duty, 0-24VDC, Brush Type, 19:1 Gear Reduction Drive for the GA series pumps.
Drive Type: Brush
Speed (min): 100 RPM
Speed (max): 500 RPM
Power Source: 24 VDC
Mount: C-Mount
Speed Control: Input Voltage
Connection: Spade Terminals
Enclosure: TENV
Torque (max): 127.11 mNm 18 oz-in
Power (max): 37 W
|
3307.48 |
|
|
Micropump DN519A Motor Explosion Proof
The DN-519.A is a continuous duty, 115/230 VAC, 3450 RPM, Explosion Proof Drive for the GA, GB, GJ, and CA series pumps.
Drive Type: Explosion Proof
Speed (min): 3450 RPM
Speed (max): 3450 RPM
Power Source: 115/230 VAC
Mount: A-Mount
Speed Control: None
Connection: Wire Leads
Enclosure: CLASS 1, DIV 1. GROUPS C&D
Torque (max): 529.62 mNm 75 oz-in
Power (max): 127 W
Frequency: 50/60 Hz
Product Number: 81094
|
5016.35 |
|
|
FINISH THOMPSON M6 AIR MOTOR
Model
Certification
Requirements
Output
(KW)
RPM
Maximum
Viscosity
M6
CE
80-100psi@15-32cfm
400
300-9,000
For use with Finish Thompson Inc. FTI drum pumps. Drum pump motors are available as electric or air pneumatic motors. Most motors and drum pump tubes are interchangeable. Simply disconnect one from the other.
CAUTION: When pumping flammables, use only air or explosion-proof electric motors on stainless steel (DO NOT PLASTIC TUBES) without the static protection kit .
Non-electrical air operation means the possibility of explosion from igniting flammable gases is reduced.
Please allow about two weeks for delivery.
|
467.81 |
|
|
FINISH THOMPSON M6 AIR MOTOR
Model
Certification
Requirements
Output
(KW)
RPM
Maximum
Viscosity
M6X
CE
80-100psi@15-32cfm
600
300-9,000
For use with Finish Thompson Inc. FTI drum pumps. This drum pump motor is a air pneumatic motor. Most motors and drum pump tubes are interchangeable. Simply disconnect one from the other.
CAUTION: When pumping flammables, use only air or explosion-proof electric motors on stainless steel (DO NOT PLASTIC TUBES without the static protection kit.)
Non-electrical air operation means the possibility of explosion from igniting flammable gases is reduced.
Air motor performance will depend upon user's compressor and system setup.
Please allow about two weeks for delivery.
|
581.25 |
|