Micropump DC332A.C 24Vdc Motor with C Mount The DC-332A.C is an intermittent duty, 0-24VDC, Brush Type, Permanent Magnet Drive for the GA and GJ (N21) series pumps.

Micropump DC331AC 12Vdc Motor with C Mount The DC-331A.C is an intermittent duty, 0-12VDC, Brush Type, Permanent Magnet Drive for the GA and GJ (N21) series pumps.

Micropump DV955.A Air Motor with A Mount The DV-955.A is a 5-80 psi, 500-10,000 RPM, Air Vane Drive for the GA, GB, GJ, and CA series pumps.

Micropump DC361C 24Vdc Motor C Mount The DC-361.C is an intermittent duty, 0-24VDC, Brush Type, 19:1 Gear Reduction Drive for the GA series pumps. Drive Type: Brush Speed (min): 100 RPM Speed (max): 500 RPM Power Source: 24 VDC Mount: C-Mount Speed Control: Input Voltage Connection: Spade Terminals Enclosure: TENV Torque (max): 127.11 mNm 18 oz-in Power (max): 37 W

Micropump GA-V23.C8FS.C Pump Head C Mount Micropump Low-flow pump head, pressure-loaded, 0.084 mL/revolution Max Flow Rate (mL/min): 672 Flow Rate (mL/rev): 0.084 Min Flow Rate (mL/min): 12.6 Differential Pressure (PSI): 40 Differential Pressure (bar): 2.8 Max Motor RPM (rpm): 8000 Seal Material: PTFE Body Material: 316 SS Gear Material: Carbon graphite Relief Valve: No Run Dry: Under 30 seconds Duty Cycle Continuous: Yes Particulates: No Max Temperature ( F): 350 Min Temperature ( F): -50 Max Temperature ( C): 177 Min Temperature ( C): -46 Max Viscosity (cP): 100 Model Number: GA-V23.C8FS.C Part Number: 82117

Micropump 81156 Pump And Mount Micropump Series GJ Magnetic Drive Gear Pump, Cavity Style, Two Helical, Shafted Gears/DP24, Gear Set N23: .64 ml/rev, Model GJ-N23-DV955A   The image may not always be an accurate representation of the product.

Micropump GJ-N21.FF2S.C Pump Head C Mount Micropump 82059 GJJN21.FF2S.C  Mag-Drive Gear Pump Head Requires A-Mount compatible Drive 82059 is constructed of Base Material 316SS Gear Material PTFE Shaft Material 316SS

Micropump GA-T23.P9FS.C Pump Head C Mount Low flow pump head pressure 0.092 mL/revolution

Oberdorfer 10562 M Kit For 48 Frame Motors  

Cat Pump Motor Electric Flange Mount 8020

Micropump DB380.A with Bracket 24Vdc Motor A Mount The DB-380.A is a 24VDC Brushless Drive for the popular GA, GB, and GJ series pumps. Designed for continuous duty and featuring 0-5VDC speed control and tach output, this drive performs well in a variety of applications. It differs from the DB-380.B only by the drive to pump mount configuration. 

RAM® Tough-Claw™ Trolling Motor Stabilizer - C Size Medium  Ideal for stabilizing trolling motors, the RAP-400-202U consists of the small RAM® Tough-Claw™ base, C size medium-length double socket arm, and a round base adapter. The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, and odd-shaped rails, and bars. The RAM® Tough-Claw™ can be clamped on rails from 0.625" - 1.14" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern. This mount is designed with RAM® C size 1.5" diameter patented ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles. Features: Includes a small version of the RAM® Tough-Claw™, medium length C size RAM® double socket arm, and 2.5" round plate with C size 1.5" RAM® rubber ball A small version of the RAM® Tough-Claw™ base is designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from .625" to 1.14" in outer diameter; rubber pads provide stable gripping and protection of mounting surface Made of powder-coated, marine-grade aluminum and high-strength composite for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Clamp Range (inch): 0.625" - 1.14" diameter Socket to Socket Length (inch): 4.66" Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Plate Size: 2.5" Diameter Ball Size (inch): C Size (1.5") Materials: Marine-grade aluminum, High strength composite Packaging Type: Polybag Weight: 2.19 lb. Weight Capacity:  Standard Use: 4 lbs  Heavy-Duty Use: 3 lbs

Groco 12V-Jc 12V Motor With Controller  

Torque™ 1-1/8" - 1-1/2" Diameter Handlebar/Rail Base with C Size 1.5" Ball The RAM® Torque™ handlebar and rail mounting base has a 1.5” rubber ball and accommodates bars 1-1/8” to 1-1/2” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Mounting Base Dimensions: Accommodates rails 1 1/8" to 1 1/2" in diameter Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball "C" Size Note: The "U" in the part number reflects product packaged in poly bag.

Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with C Size 1.5" Ball The RAM® Torque™ handlebar and rail mounting base has a 1.5” rubber ball and accommodates bars 3/4” to 1” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Mounting Base Dimensions: Accommodates rails 0.75" to 1" in diameter Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball "C" Size Note: The "U" in the part number reflects product packaged in poly bag.