Micropump DN519A Motor Explosion Proof The DN-519.A is a continuous duty, 115/230 VAC, 3450 RPM, Explosion Proof Drive for the GA, GB, GJ, and CA series pumps. Drive Type: Explosion Proof Speed (min): 3450 RPM Speed (max): 3450 RPM Power Source: 115/230 VAC Mount: A-Mount Speed Control: None Connection: Wire Leads Enclosure: CLASS 1, DIV 1. GROUPS C&D Torque (max): 529.62 mNm 75 oz-in Power (max): 127 W Frequency: 50/60 Hz Product Number: 81094

March TE-7S-MD Magnetic Drive Pump Applications for the March TE-7S-MD part # 0155-0036-0500 Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.   The TE-7S-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Potassium Chloride, Potassium Hydroxide, Sodium Chloride, Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, and many more chemicals. The TE-7S-MD may have been modified to handle these chemicals.   March Pump's industrial TE-7S-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 57.5 Feet (or around 25PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Viton, Carbon, and Ceramic. The inlet connection is 1.5 inch female pipe thread, and the outlet is 1 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 1 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. The March TE-7S-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.   Unit System 50Hz Max Flow 180 LPM Max Head 12 M Power .745 KW     Type Centrifugal Mag Drive Inlet 1-1/2"FPT Outlet 1"MPT Wet End 316 Stainless Steel (Front Housing, Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing) Motor 1HP 3 phase Explosion Proof Motor  

March TE-MDX-MT3 Magnetic Drive Pump Uses include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioning.   The TE-MDX-MT3 has pumped Acetic Acid, Acetone, Benzene Sulfonic Acid, Citric Acid, Ethanolamine, Freon 11, Potassium Hydroxide, Potassium Permanganate, Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, DI Water, and many more chemicals.   March Pump's industrial TE-MDX-MT3 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer.   It is capable of generating a maximum flow of 10 gallons per minute at 1 foot, and its maximum head is 17 Feet (or around 7PSI).   The standard wet end (the materials that come into contact with the solution) is composed of Ryton, Viton, and Ceramic. The inlet connection is 0.5 inch male pipe thread, and the outlet is 0.5 inch male pipe thread.   The standard motor is a 1 Phase 115V or 230V 0.066 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz.   The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March TE-MDX-MT3 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids and solvents.   Max Flow: 10 GPM or 35 LPM Max Head: 17 FT or 3.7 M Power: .066 HP or .049 KW Electrical: 1Ph 115/230V 50/60HZ Type: Centrifugal Mag Drive Inlet: 1/2"MPT Outlet: 1/2"MPT Wet End: Ryton (Front and Rear Housing, Impeller), Ceramic (Shaft, Thrust Washer), Viton (O-Ring) Motor: Explosion Proof Motor  

March TE-7S-MD Magnetic Drive Pump Applications for the March TE-7S-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.   The TE-7S-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Potassium Chloride, Potassium Hydroxide, Sodium Chloride, Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, and many more chemicals.   March Pump's industrial TE-7S-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 57.5 Feet (or around 25PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Viton, Carbon, and Ceramic. The inlet connection is 1.5 inch female pipe thread, and the outlet is 1 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 1 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheitor 121 Celsius. The March TE-7S-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.   Unit System 60Hz Max Flow 53 GPM Max Head 57.5 FT Power 1 HP Electrical 1Ph 115v                   Type Centrifugal Mag Drive Inlet 1-1/2"FPT Outlet 1"MPT Wet End 316 Stainless Steel (Front Housing, Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing) Motor 1HP Explosion Proof Motor 115 volt  

Micropump DP415A 115Vac Motor A Mount The DP-415.A is an intermittent duty, 115 VAC, Universal Drive for the GA, GB, GJ, and CA series pumps. Drive Type: Universal Speed (min): 500 RPM Speed (max): 9000 RPM Power Source: 115 VAC Mount: A-Mount Speed Control: Manual Connection: Cord & Plug Enclosure: Open, Drip Proof Torque (max): 91.80 mNm 13 oz-in Power (max): 67 W Frequency: 50/60 Hz Product Number: 83433

Micropump 81997 De24G Motor

Micropump DP405AA 115Vac Motor A Mount

Micropump DC331AC 12Vdc Motor with C Mount The DC-331A.C is an intermittent duty, 0-12VDC, Brush Type, Permanent Magnet Drive for the GA and GJ (N21) series pumps.

Micropump 85233 Pump/Motor Gj-N25-Demse

Micropump DJ605A 115V Motor A Mount The DJ-605.A is a continuous duty, 115 VAC, 3450 RPM, Shaded Pole Drive for the GA, GB, GJ, and CA series pumps.   Drive Type: Shaded Pole Speed (min): 3450 RPM Speed (max): 3450 RPM Power Source: 115 VAC Mount: A-Mount Speed Control: None Connection: Cord & Plug Enclosure: TEFC Torque (max): 127.11 mNm 18 oz-in Power (max): 37 W Frequency: 50/60 Hz Product Number: 20070

Micropump DC361C 24Vdc Motor C Mount The DC-361.C is an intermittent duty, 0-24VDC, Brush Type, 19:1 Gear Reduction Drive for the GA series pumps. Drive Type: Brush Speed (min): 100 RPM Speed (max): 500 RPM Power Source: 24 VDC Mount: C-Mount Speed Control: Input Voltage Connection: Spade Terminals Enclosure: TENV Torque (max): 127.11 mNm 18 oz-in Power (max): 37 W

March TE-5.5C-MD 1 Phase Mag Drive Pump with Explosion Proof Motor   Applications for the TE-5.5C-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.     March Pump's industrial TE-5.5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.33 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-5.5C-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.     Unit System 60Hz 50Hz Max Flow 30 GPM 102 LPM Max Head 41 FT 9 M Power .33 HP .248 KW Electrical 1PH 115/230V                  3PH 230/460V 50/60HZ   Type Centrifugal Mag Drive Inlet 1"FPT Outlet 3/4"MPT Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers) Motor Options Explosion Proof

Oberdorfer 300B Series Self Priming Centrifugal Pump FEATURES Pump Body: Bronze Ports: 1" NPT Flow: 22 GPM Max Pressure: 15 PSI Max, 35 feet of head Impeller: Centrifugal Shaft Seal: Mechanical Buna Seal Standard, Viton or Teflon Optional Shaft: Stainless Steel Standard, Monel Optional Motor / Drive: Attaches to NEMA C flange jet pump motors with threaded shaft of stainless steel or monel. We can supply additional motors and assemble if required.     APPLICATIONS / CHARACTERISTICS CLOSE COUPLED BRONZE SELF-PRIMING CENTRIFUGAL PUMP Bronze Models with Monel Shaft Sleeve - Ideal for marine service (air conditioning, bilge, and sea water recirculating). Can handle most difficult solvents with proper seal arrangement. Suction lift of 15 feet without a foot or check valve.     300B-F21 is Oberdorfers - Self Priming Centrifugal Pump Bronze 1/3HP 1PH Explosion Proof  

FINISH THOMPSON M3X 1/10HP 5000RPM 115V EXPLOSION PROOF MOTOR Explosion Proof Motors  Model Certification  Requirements Input/Output (W) RPM Maximum Viscosity  M3X CSA  115V/50-60Hz 230/75 10,000 10 cP

Lutz Silver Star Drum Pump Motor 0040-200 Lutz MEI 6 Silver Star Universal Drum Pump Motor A light, easily handled, explosion proof motor, suitable almost all types of thin-bodied, slightly viscous, flammable liquids.   Extremely rigid aluminium casing, robust high-power motor Electronic speed control to constantly ensure the right flow rate Separate ON/OFF buttons with low voltage release for safety and ease of handling 120 V / 60Hz 640 W / 0.85 HP Splash-proof in accordance with protection class IP 54, 16´ (5 m) cord, optionally with remote operating kit.