RayStar 150 GPS Sensor w/Pole Mount RS150 GPS Sensor The RS150 GPS is a high performance, 72-channel, remotely mounted GPS sensor for Raymarine navigation systems. The RS150 offers fast 10Hz position updates and enhanced accuracy. The RS150 is also a GNSS receiver and supports the GLONASS global navigation satellite system. Features: 72-channel GPS receiver Fast 10Hz position updates Satellite differential GPS-compatible. Space-Based Augmentation System (SBAS) enabled with WASS, EGNOS, MSAS and GAGAN support A GNSS receiver with GLONASS compatibility Low power consumption: 30mA (1 LEN) SeaTalkng and NMEA2000 compatible (using a device net adapter cable) Designed for low profile surface mounting or optional pole mounting Specifications: Nominal supply voltage: 12V D.C. Powered by N2K bus Operating voltage range: 8 - 32V DC Power consumption: 30 mA max (NMEA LEN = 1) Operating temperature: -13ºF to 131ºF (-25ºC to +55ºC) Relative humidity: max 93% Waterproof: IPx6/7 Supported connection protocols: SeaTalkng: NMEA 2000 (certified) (via DeviceNet adaptor) Sensitivity: High sensitivity - acquisition down to -163dBm No. of channels: 72 Positioning System: GPS & GLONASS Satellite Differential Type: WAAS (United States); EGNOS (Europe); MSAS (Japan); GAGAN (India) Differential acquisition: Automatic Position accuracy (95%): <15M Position accuracy with SDGPS (95%): <5M Speed accuracy (95%): <0.3kt Time to first fix from cold start: <2 minutes (< 45 seconds typical) Time to first fix from hot start: < 8 seconds -72 hour hold up battery allows for hot start Geodetic Datum: WGS84 Pole Mount for RS150 GPS Antenna Raymarine's Pole Mount specifically for the RS150 GPS Antenna. The RS150 has 72 channels and offers faster 10Hz performance and enhanced accuracy. The RS150 is also a GNSS receiver and supports the GLONASS global navigation satellite system.

SeaTalk 1 to SeaTalkng Converter Kit The SeaTalk 1 to Seatalkng converter allows select SeaTalk 1 devices to interface and communicate on the Raymarine SeaTalkng data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag Wireless Man Overboard Systems. The SeaTalk to SeaTalkng Converter kit is a compact solution that connects in-line with the SeaTalkng instrument network. The converter kit includes all of the necessary components to interface to SeaTalk 1 devices, and establish basic SeaTalkng connectivity on the vessel including: SeaTalk 1 to SeaTalkng converter SeaTalkng Terminators (x2) SeaTalkng Blanking Plugs (x2) 400mm (15") SeaTalk 1 to SeaTalkng converter cable SeaTalkng power cable 1m (3.3') SeaTalkng spur cable Features: Easy plug-and-play connectivity with SeaTalkng networks. Works with select SeaTalk 1 instruments, GPS sensors and LifeTag. Included SeaTalkng components establish basic backbone connectivity. Easily expanded using Raymairne SeaTalkng network components.

GPS - Fishfinder Combos

GPS - Track Plotter

NMEA2000 GNSS SAT Compass with Pole Mount (No Cable Included) Experience superior navigation from the accurate heading and positioning performance available with the V200 SAT Compass.  The multi-GNSS V200 supports GPS, GLONASS, BeiDou, Galileo, and QZSS and offers an amazing world-wide 30cm (11.8") RMS accuracy via the optional Atlas GNSS global correction service.  The Vector V200 offers an incredible combination of simple installation, small form factor, and amazing performance. The compass - measuring only 35cm (13.7") in length - mounts easily to a flat surface or pole. The stability and maintenance-free design of the Vector V200 provides simple integration into autopilots, chart plotters, and AIS systems. Features: Uses all known Satellite Systems GPS, GLONASS, Galileo, BeiDou, QZSS 30cm (11.8") RMS world-wide positioning accuracy with Atlas correction subscription  0.75 degree heading accuracy in an amazingly small form factor Excellent in-band and out-of-band interference rejection Integrated gyro and tilt sensors help deliver fast start-up times and provide heading updates during temporary loss of satellites Provides heading, positioning, heave, roll and pitch

GP330B/0183 GPS Sensor with 10M NMEA0183 Cable  The GP330B/0183 is sold with a 10M cable that is terminated with a conventional 7-pin connector, delivering true "plug-and-play" compatibility with Furuno products and other NMEA0183 devices. Features: Robust and compact waterproof housing Easy installation with cable connector to bottom of antenna May be installed on pole mount, deck mount (with deck standoff) or easily flush mounted for very low profile with standoff removed Compact, Versatile and Accurate Positioning The GP330B/0183 is a high performance GPS Receiver designed for any type of vessel. This compact and cost-effective receiver offers extremely accurate position fixes, within 3 meters with the WAAS mode activated. The GP330B/0183 is capable of data output in either NMEA0183 or NMEA2000 formats, making it an ideal GPS sensor for use with NavNet systems The sensor comes with all of the hardware required for deck- or mast-mounting solutions. A 10-meter cable with NMEA0183 connector is supplied as standard. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

i40 Depth w/Transom Mount Transducer Compact and feature-packed instruments, the i40 series instruments are smart choice for boaters looking high performance and great value. The i40 series is simple to operate thanks to the use of just three control buttons, i40 has extra-large digits and razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. These SeaTalk® compatible instruments offer full integration with Raymarine autopilots and navigation equipment. The ultra-sleek design of i40 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. All i40 Instruments come with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately. i40 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 0.4 watts for superior run-time and excellent green credentials. The i40 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase. i40 Depth Instrument Raymarine's i40 Depth Instrument is available as a complete system with a thru-hull transducer, transom mount or as a display-only kit enabling you to monitor your boat's depth at a remote location. The i40 Depth Instrument offers easy-to-read displays of current depth, and minimum depth recorded. The unit also offers a convenient shallow depth alarm, deep depth alarm, shallow anchor alarm, and deep anchor alarm. The i40 Depth Instrument offers convenient depth offset controls allowing you to calibrate the readout to compensate for projections (rudders, props, skegs etc.) or to display the depth from the waterline of the vessel. i40 Key Features Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems. High contrast LCD displays with large digits for excellent visibility. Red backlighting for outstanding night-time visibility. Simple SeaTalk networking with other Raymarine instruments, autopilots and MFDs. Built-in transducer connections simplify installation. Small form factor saves space at the helm without sacrificing features.

Bail Mount with Knobs for GPSMAP® 8x16 Series Surface mount your GPSMAP® using our bail mount with knobs. The mount tilts for optimum viewing. Compatible Devices: GPSMAP® 8416 GPSMAP® 8416xsv GPSMAP® 8616 GPSMAP®8616xsv WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GPSMAP® 1623xsv Chartplotter GET A SHARPER VIEW FROM A CONNECTED HELM With its sleek design, powerful processing, and upgraded IPS display, this advanced 16” chartplotter integrates seamlessly into a Garmin marine system. Easily integrate with more engines.  Connect to compatible third-party devices with digital switching and OneHelm™ integrations.  Easily build a marine system by using our advanced network connectivity.  See below the boat with built-in sonar capabilities Manage the marine experience from nearly anywhere1. Ultra High-Definition Scanning Sonar Get built-in Ultra High-Definition SideVü and ClearVü™ scanning sonars with vivid, high-contrast color palettes to help distinguish fish from structure. GPSMAP® X3 series also supports 1 kW CHIRP traditional sonar capabilities. Live Sonar Support Pair with Panoptix™ or LiveScope™ easy-to-interpret live sonar (transducer required, sold separately) to see all around the boat in real-time. Faster, Sharper, Smarter With its added processing power and slimline design featuring edge-to-edge glass, it’s easy to fit this plotter in a wider range of dash configurations. Bright and Clear Optics High-resolution IPS display chartplotter offers improved sunlight readability and visibility from any angle. Optional Charts and Maps Bring a fresh new look and feel to the chartplotter with an optional upgrade to a Garmin Navionics Vision+™ premium chart subscription, featuring downloadable high-resolution relief shading, satellite imagery, sonar imagery, and more. Power-Pole® Shallow Water Anchor By networking select Garmin chartplotters with a Force® trolling motor and a compatible Power-Pole shallow water anchoring system, users can access advanced boat control features3 from the plotter, including smart anchor auto-deployment, smart anchor jog, auto stow, anchor drag detection, and end-of-route anchoring. Spend more time fishing and less time positioning. Trolling Motor Integration Get support and integration for a Force trolling motor (sold separately) to gain complete control while fishing. Charge Integration From Power-Pole CHARGE Marine Power Manager from Power-Pole integrates with compatible Garmin chartplotters to help keep battery power going longer and stronger on the water. Users can charge batteries on the run, monitor power use, select where power is allocated, control emergency starts, and even transfer power between battery banks — all from the chartplotter display. Garmin Sailassist™ Sailing Features View laylines, race start line guidance, enhanced wind rose, heading and course-over-ground lines, true wind data fields and tide/current/time slider, wind angle, set and drift, wind speed, and more. Sailing Polars Use the polar table to see key data, including how fast users should go at a certain wind angle and speed — so users know whether the sail trim needs to be adjusted. Garmin Marine Network If users have multiple compatible Garmin devices on the boat, users can share information — such as maps, user data, radar, and IP camera video — among them. NMEA 2000® and NMEA 0183 Networks Connect to compatible autopilots, digital switching, weather, the Fusion audio system, media, VHF, AIS, and more from one screen. Activecaptian® APP Built-in Wi-Fi® connectivity pairs with the free all-in-one mobile app for access to the OneChart™ feature, smart notifications, software updates, Helm app, Garmin Quickdraw™ Community data, and more1. Integrated ANT® Technology Connect with some of the favorite devices, such as quatix® marine watches, gWind™ Wireless 2 transducers, GNX™ Wind marine instruments, and wireless remote controls. Engine Connectivity Users can connect a chartplotter to different engines, including select Yamaha® engines. OneHelm Feature This feature brings together all the operations and capabilities of select third-party devices, such as EmpirBus™ digital switching, on one screen. Send InReach® Device Messages Pair an inReach satellite communicator4 to the chartplotter, and type custom messages by using the MFD’s on-screen keyboard. Access the contact list, or enter an email, inReach address, or phone number. Users can also group messages by conversation for a texting-like experience. In the Box: Chartplotter microSD™ preinstalled Power cable NMEA 2000® T-connector NMEA 2000 drop cable Flush mount kit with gasket protective cover Trim piece snap covers  Connections NMEA 2000® Ports: 1 NMEA 0183 Input Ports: 1 NMEA 1083 Input (TX) Ports: 1 Video Input Ports: 1 (BNC composite) Video Output Ports: 1 HDMI J1939 Ports: 1 Garmin Marine Network Ports: 2 12-Pin Transducer Port: 1 USB Ports: 1 Bluetooth® Pairing ANT+ (Connectivity) Garmin Wi-Fi Network (Local Connection) Specifications: Unit Dimensions: 15.1" x 10.3" x 3" (38.4 cm x 26.2 cm x 7.6 cm) Unit Weight: 9.7 lbs (4.4 kg) 1Requires ActiveCaptain app on your compatible smartphone paired to your chartplotter 2Auto Guidance+ is for planning purposes only and does not replace safe navigation operations 3Integration of these features requires the purchase of a C-Monster® GATEWAY through Power-Pole 4Active satellite subscription required. Some jurisdictions regulate or prohibit the use of satellite communication devices. It is the responsibility of the user to know and follow all applicable laws in the jurisdictions where the device is intended to be used. Wi-Fi is a registered trademark of the Wi-Fi Alliance. Engineering enhancements are ongoing and may not be reflected in the pictures, videos, and specifications. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GPSMAP® 1643xsv Chartplotter GET A SHARPER VIEW FROM A CONNECTED HELM With its sleek design, powerful processing, and upgraded IPS display, this advanced 16” chartplotter integrates seamlessly into a Garmin marine system. Easily integrate with more engines.  Connect to compatible third-party devices with digital switching and OneHelm™ integrations.  Easily build a marine system by using our advanced network connectivity.  Navigate any waters with preloaded Garmin Navionics+™ charts See below a boat with built-in sonar capabilities Manage the marine experience from nearly anywhere1. Ultra High-Definition Scanning Sonar Get built-in Ultra High-Definition SideVü and ClearVü™ scanning sonars with vivid, high-contrast color palettes to help distinguish fish from structure. GPSMAP® X3 series also supports 1 kW CHIRP traditional sonar capabilities. Live Sonar Support Pair with Panoptix™ or LiveScope™ easy-to-interpret live sonar (transducer required, sold separately) to see all around the boat in real-time. Faster, Sharper, Smarter With its added processing power and slimline design featuring edge-to-edge glass, it’s easy to fit this plotter in a wider range of dash configurations. Bright and Clear Optics High-resolution IPS display chartplotter offers improved sunlight readability and visibility from any angle. Preloaded Mapping Experience unparalleled coverage and detail with built-in Garmin Navionics+ integrated coastal and inland mapping that includes Auto Guidance+™ technology3 and a 1-year subscription for downloadable daily updates and more on select chartplotters. Optional Charts and Maps Bring a fresh new look and feel to the chartplotter with an optional upgrade to a Garmin Navionics Vision+™ premium chart subscription, featuring downloadable high-resolution relief shading, satellite imagery, sonar imagery, and more. Power-Pole® Shallow Water Anchor By networking select Garmin chartplotters with a Force® trolling motor and a compatible Power-Pole shallow water anchoring system, users can access advanced boat control features3 from the plotter, including smart anchor auto-deployment, smart anchor jog, auto stow, anchor drag detection, and end-of-route anchoring. Spend more time fishing and less time positioning. Trolling Motor Integration Get support and integration for a Force trolling motor (sold separately) to gain complete control while fishing. Charge Integration From Power-Pole CHARGE Marine Power Manager from Power-Pole integrates with compatible Garmin chartplotters to help keep battery power going longer and stronger on the water. Users can charge batteries on the run, monitor power use, select where power is allocated, control emergency starts, and even transfer power between battery banks — all from the chartplotter display. Garmin Sailassist™ Sailing Features View laylines, race start line guidance, enhanced wind rose, heading and course-over-ground lines, true wind data fields and tide/current/time slider, wind angle, set and drift, wind speed, and more. Sailing Polars Use the polar table to see key data, including how fast users should go at a certain wind angle and speed — so users know whether the sail trim needs to be adjusted. Garmin Marine Network If users have multiple compatible Garmin devices on the boat, users can share information — such as maps, user data, radar, and IP camera video — among them. NMEA 2000® and NMEA 0183 Networks Connect to compatible autopilots, digital switching, weather, the Fusion audio system, media, VHF, AIS, and more from one screen. Activecaptian® APP Built-in Wi-Fi® connectivity pairs with the free all-in-one mobile app for access to the OneChart™ feature, smart notifications, software updates, Helm app, Garmin Quickdraw™ Community data, and more1. Integrated ANT® Technology Connect with some of the favorite devices, such as quatix® marine watches, gWind™ Wireless 2 transducers, GNX™ Wind marine instruments, and wireless remote controls. Engine Connectivity Users can connect a chartplotter to different engines, including select Yamaha® engines. OneHelm Feature This feature brings together all the operations and capabilities of select third-party devices, such as EmpirBus™ digital switching, on one screen. Send InReach® Device Messages Pair an inReach satellite communicator4 to the chartplotter, and type custom messages by using the MFD’s on-screen keyboard. Access the contact list, or enter an email, inReach address, or phone number. Users can also group messages by conversation for a texting-like experience. In the Box: Chartplotter microSD™ preinstalled Power cable NMEA 2000® T-connector NMEA 2000 drop cable Flush mount kit with gasket protective cover Trim piece snap covers  Connections NMEA 2000® Ports: 1 NMEA 0183 Input Ports: 1 NMEA 1083 Input (TX) Ports: 1 Video Input Ports: 1 (BNC composite) Video Output Ports: 1 HDMI J1939 Ports: 1 Garmin Marine Network Ports: 2 12-Pin Transducer Port: 1 USB Ports: 1 Bluetooth® Pairing ANT+ (Connectivity) Garmin Wi-Fi Network (Local Connection) Specifications: Unit Dimensions: 15.1" x 10.3" x 3" (38.4 cm x 26.2 cm x 7.6 cm) Unit Weight: 9.7 lbs (4.4 kg) 1Requires ActiveCaptain app on your compatible smartphone paired to your chartplotter 2Auto Guidance+ is for planning purposes only and does not replace safe navigation operations 3Integration of these features requires the purchase of a C-Monster® GATEWAY through Power-Pole 4Active satellite subscription required. Some jurisdictions regulate or prohibit the use of satellite communication devices. It is the responsibility of the user to know and follow all applicable laws in the jurisdictions where the device is intended to be used. Wi-Fi is a registered trademark of the Wi-Fi Alliance. Engineering enhancements are ongoing and may not be reflected in the pictures, videos, and specifications. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

TRAWLPLOT 12 12.1" Color LCD GPS/WAAS Charting System Advanced C-MAP MAX/NT+ Charting System for the Professional features High-speed Intel Xscale Processor, Easy Operation, Unlimited Storage, GPS WAAS Positioning, Large 12.1" Daylight Viewable Display and expands to an all-in-one GPS Chart/Fishfinder/Radar with optional sensors. 12.1" XVGA Color LCD TFT display with 800 x 600 pixels for high-definition. GPS WAAS 18-channel receiver will put your boat within 3 meters of your waypoint in most situations. Newly designed high-speed processor with INTEL XSCALE Architecture gives you instant screen changes. Zoom level changes appear in the blink of an eye, regardless of the amount of screen detail. Compatible with the new C-MAP MAX charts, technically the most innovative C-MAP charts ever designed. System operates as a C-MAP MAX based chart plotter with four C-Card slots, or as a track plotter without map display. Guardian™ Programmable Anti-Grounding feature* lets you know if your current course takes you within preset distance of charted shoals, obstructions or other areas where the water is too shallow for your vessel's draft.ES502 Fishfinder Module and optional 2kW to 4kW MDS Radar Sensors. Depth Graph feature accepts input from onboard sounder or optional Active Transducer to display graphic presentation of vessel's current depth and recent depth history. Operates in North-Up or Track-Up modes. Coordinates displayed in Lat/Lon, Loran TD's, or UTM. Displays Loran TD's even when position data is supplied in Lat/Lon coordinates. Alphanumeric designations for easy identification of waypoints and marks. "One-Touch" event markfor easy storage and retrieval of gear marks. Unlimited amount of fishing-ground track and route data can be downloaded and stored on standard 3.5" floppy disks. Can read disks from many previous SI-TEX plotters. Each disk can store up to 80,000 track plots and up to 40,000 user points of track and route data for quick recall and display as desired. Tide Info feature uses local C-Card information to calculate tide graph for local ports. Find Function uses local C-Card to locate nearest boatyard, bank, even the closest shower. Joystick control of on-screen cursor to plot, scroll, pan, zoom and place waypoints, events and marks, and to control on-screen VRM and EBL. GOTO and MOB functions. Fourteen selectable languages. Route Data Page displays waypoint position, distance and bearing between the previous waypoint and the current one, fuel consumption, fuel consumption between the waypoint and the first waypoint of the route, estimated time enroute, and total distance. Data information window displays digital route navigation data, and a wealth of other information. Two NMEA-0183 dataports for interfacing data with other on-board electronics. Zoom into as little as 180' across screen. Optional ES502 Fishfinder Module adds full-featured fishfinder capabilities.

Element™ 9 HV Chartplotter & Fishfinder Combo - No Transducer Knowledge is power—and the Element™ CHIRP sonar/GPS series from Raymarine gives you the power to make smarter decisions on the water. Built for anglers that want to be one step ahead of the game, Element delivers the sharpest view of the underwater world with HyperVision™ 1.2 megahertz super high-resolution sonar technology. HyperVision technology takes DownVision, SideVision, and Raymarine RealVison 3D sonar to the next level of precision imaging and fish identification, letting you see structures, vegetation, and fish with photo-like clarity.  And the power of Element doesn’t stop there—an onboard quad-core processor delivers instantaneous chart redraw, fast response, and smooth RealVision 3D imaging. To keep you on target, Element features simple keypad controls and an angler-centric user interface so you can focus on the fish—not the helm.  An oversized waypoint key puts you on your favorite spots, and Element’s RealBathy™ personal depth map generator lets you make your own high definition bathymetric maps on the fly. Features: High-visibility sunlight viewable 9” display Superior HyperVision CHIRP sonar technology achieves 3x the clarity of conventional side and down imaging sonars  Built-in RealVision 3D sonar gives you the power to accurately identify the location of ledges, channel beds, and other contour changes Fast quad-core processor allows instantaneous chart re-draw and continuous 3D rending while running a simple, easy-to-learn user interface. 1.2 megahertz HyperVision sonar provides outstanding resolution up to 100’ while 350kHz Down and SideVision delivers photo-like imaging up to 600’ Take 3D sonar to the next level with HyperVision mode for unprecedented resolution and positional awareness Dedicated keypad controls for simple operation, plus an oversized waypoint key for marking favorite spots Raymarine RealBathy™ personal sonar mapping and Navionics SonarCharts Live support  User-programmable keys allow quick access to most-used configurations Support for Raymarine LightHouse NC2 with Fishing Hot Spots, Navionics, C-MAP and other regional charting options NMEA2000 networking for VHF, engine, tanks, and heading sensor integration

Element™ 12 HV Chartplotter & Fishfinder Combo - No Transducer Knowledge is power—and the Element™ CHIRP sonar/GPS series from Raymarine gives you the power to make smarter decisions on the water. Built for anglers that want to be one step ahead of the game, Element delivers the sharpest view of the underwater world with HyperVision™ 1.2 megahertz super high-resolution sonar technology. HyperVision technology takes DownVision, SideVision, and Raymarine RealVison 3D sonar to the next level of precision imaging and fish identification, letting you see structures, vegetation, and fish with photo-like clarity.  And the power of Element doesn’t stop there—an onboard quad-core processor delivers instantaneous chart redraw, fast response, and smooth RealVision 3D imaging. To keep you on target, Element features simple keypad controls and an angler-centric user interface so you can focus on the fish—not the helm.  An oversized waypoint key puts you on your favorite spots, and Element’s RealBathy™ personal depth map generator lets you make your own high definition bathymetric maps on the fly. Features: High-visibility sunlight viewable 12” display Superior HyperVision CHIRP sonar technology achieves 3x the clarity of conventional side and down imaging sonars  Built-in RealVision 3D sonar gives you the power to accurately identify the location of ledges, channel beds, and other contour changes Fast quad-core processor allows instantaneous chart re-draw and continuous 3D rending while running a simple, easy-to-learn user interface. 1.2 megahertz HyperVision sonar provides outstanding resolution up to 100’ while 350kHz Down and SideVision delivers photo-like imaging up to 600’ Take 3D sonar to the next level with HyperVision mode for unprecedented resolution and positional awareness Dedicated keypad controls for simple operation, plus an oversized waypoint key for marking favorite spots Raymarine RealBathy™ personal sonar mapping and Navionics SonarCharts Live support  User-programmable keys allow quick access to most-used configurations Support for Raymarine LightHouse NC2 with Fishing Hot Spots, Navionics, C-MAP and other regional charting options NMEA2000 networking for VHF, engine, tanks, and heading sensor integration

Evolution EV-150 Hydraulic Autopilot System Pack The Evolution EV-150 Hydraulic Autopilot System Pack is a complete autopilot-in-a-box kit that is ready to install on many popular fishing and cruising powerboats with hydraulic steering. The system comes complete with our p70Rs autopilot controller, EV1 Sensor Core, ACU150 Actuator Control Unit, Type 1 Hydraulic Pump, and an Evolution autopilot cabling kit. Engineered for simplicity, Raymarine's award-winning Evolution autopilots eliminate the need for complicated set up and calibration. Thanks to the intelligent 9-axis EV sensor core, the autopilot automatically evolves and adapts to your vessel's steering characteristics without any user adjustments. The result is precise and confident course keeping, regardless of vessel speed or sea conditions. The Evolution EV-150 system also employs Raymarine's patented Hydro-Balance™ technology which delivers superior autopilot performance for hydraulically steered boats, particularly those with outboard motors and rudder-reference less systems. Hydro-Balance automatically compensates for hydraulic system elasticity, steering system asymmetry, and torque steer to keep your boat on-course at trolling speed, cruising speed, and all-out running. Anglers will also love the Evolution Autopilot's built-in trolling patterns. Let the autopilot work the boat while you prep bait, set your lines and adjust your spread. The system is also equipped with Raymarine latest Evolution TrackIQ™ algorithms which deliver tighter track-keeping and faster track acquisition. It also uses information on vessel pitch, roll, yaw and heave to stabilize GPS navigation data like course over ground, speed over ground and cross track error for the best possible tracking to waypoints and routes. The Raymarine EV-150 Hydraulic Autopilot System Pack is the ideal autopilot for small to medium sized hydraulically steered vessels with a steering ram capacity between 4.9 cu. in. (80cc) and 14.0 cu in. (230cc). The system is for 12-volt DC electrical systems only. Includes E70329 p70Rs Control Head E70096 EV-1 Sensor Core R70160 Evolution Cable Kit E70430 ACU-150 Actuator Control Unit M81120 Type 1 12v Hydraulic Pump

Element™ 7 HV Chartplotter & Fishfinder Combo - No Transducer Knowledge is power—and the Element™ CHIRP sonar/GPS series from Raymarine gives you the power to make smarter decisions on the water. Built for anglers that want to be one step ahead of the game, Element delivers the sharpest view of the underwater world with HyperVision™ 1.2 megahertz super high-resolution sonar technology. HyperVision technology takes DownVision, SideVision, and Raymarine RealVison 3D sonar to the next level of precision imaging and fish identification, letting you see structures, vegetation, and fish with photo-like clarity.  And the power of Element doesn’t stop there—an onboard quad-core processor delivers instantaneous chart redraw, fast response, and smooth RealVision 3D imaging. To keep you on target, Element features simple keypad controls and an angler-centric user interface so you can focus on the fish—not the helm.  An oversized waypoint key puts you on your favorite spots, and Element’s RealBathy™ personal depth map generator lets you make your own high definition bathymetric maps on the fly. Features: High-visibility sunlight viewable 7” display Superior HyperVision CHIRP sonar technology achieves 3x the clarity of conventional side and down imaging sonars  Built-in RealVision 3D sonar gives you the power to accurately identify the location of ledges, channel beds, and other contour changes Fast quad-core processor allows instantaneous chart re-draw and continuous 3D rending while running a simple, easy-to-learn user interface. 1.2 megahertz HyperVision sonar provides outstanding resolution up to 100’ while 350kHz Down and SideVision delivers photo-like imaging up to 600’ Take 3D sonar to the next level with HyperVision mode for unprecedented resolution and positional awareness Dedicated keypad controls for simple operation, plus an oversized waypoint key for marking favorite spots Raymarine RealBathy™ personal sonar mapping and Navionics SonarCharts Live support  User-programmable keys allow quick access to most-used configurations Support for Raymarine LightHouse NC2 with Fishing Hot Spots, Navionics, C-MAP and other regional charting options NMEA2000 networking for VHF, engine, tanks, and heading sensor integration