|
SeaTalk 1 to SeaTalkng Converter Kit
The SeaTalk 1 to Seatalkng converter allows select SeaTalk 1 devices to interface and communicate on the Raymarine SeaTalkng data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag Wireless Man Overboard Systems. The SeaTalk to SeaTalkng Converter kit is a compact solution that connects in-line with the SeaTalkng instrument network.
The converter kit includes all of the necessary components to interface to SeaTalk 1 devices, and establish basic SeaTalkng connectivity on the vessel including:
SeaTalk 1 to SeaTalkng converter
SeaTalkng Terminators (x2)
SeaTalkng Blanking Plugs (x2)
400mm (15") SeaTalk 1 to SeaTalkng converter cable
SeaTalkng power cable
1m (3.3') SeaTalkng spur cable
Features:
Easy plug-and-play connectivity with SeaTalkng networks.
Works with select SeaTalk 1 instruments, GPS sensors and LifeTag.
Included SeaTalkng components establish basic backbone connectivity.
Easily expanded using Raymairne SeaTalkng network components.
|
119.99 |
|
|
Adapter Cable
Raymarine Adapter Cable for SeaTalk (1) to SeaTalkng
|
40.90 |
|
|
Adapter Cable SeaTalk (1) to SeaTalkNG - 1M
An adapter spur cable to connect a SeaTalk device to a SeaTalkng network. The connection must be made via a 'bridging' device such as an ST70.
SeaTalkNG
Raymarine’s proprietary cable system for use in NMEA 2000 networks. The design provides two advantages. First, the connector collars are retained on the product which allows for a smaller cable diameter making installations easier. More importantly, the cable can include a sixth wire which allows for backward compatibility with SeaTalk1 equipment. Products with SeaTalkNG connectors can be used on NMEA 2000 networks that use Devicenet cabling through simple connector adapters and conversely equipment with Devicenet connectors can be used on NMEA 2000 networks that use SeaTalkng cabling through simple connector adapters.
|
25.56 |
|
|
iTC-5 Instrument Transducer Converter
The iTC5 Instrument Transducer Converter enables the use of common analog transducer signals with new digital instrument displays like Raymarine's i70 and ST70 Plus. The ultra-compact iTC5 has connections to host the five most common analog transducers; depth, speed/temperature, wind, compass and rudder. The iTC5 instantly converts these 5 analog signals to digital SeaTalkng protocol.
In addition to providing analog-to-digital conversion, the iTC5 provides all of the necessary power and communications connections to the transducers. This greatly simplifies the installation of new systems, and also provides a simple and cost-effective means for owners of older analog instrument displays to upgrade to the latest digital display technology. The iTC5 eliminates the need for expensive "smart" transducers or individual instrument pods. Complete control for calibration and alarms is performed through the i70 or ST70 Plus instruments.
The iTC5 connects to Raymarine's SeaTalkng network and works with most analog transducers from legacy Raymarine ST30, ST40, ST50, ST60, ST80 and ST290 series instruments. Additionally the iTC5 works with Raymarine fluxgate compass modules as well as rotary and linear rudder feedback transducers to support compass heading and rudder angle instruments.
Features:
All-in-one analog to digital converter for depth, speed/temperature, wind, compass and rudder transducers
Outputs SeaTalkng and NMEA2000 data to digital instruments, MFDs and more
Enables easy upgrade of legacy analog instrument displays without replacing transducers
SeaTalkng network provides all necessary power and data connections
Ideal for use with Raymarine i70 and ST70 Plus digital instrument systems
|
327.71 |
|
|
VHF NMEA0183 To SeaTalkng Converter Kit
Raymarine's VHF NMEA0183 to Seatalkng Converter Kit is used for connecting an Isolated NMEA0183 VHF to the SeaTalkng network.
|
119.99 |
|
|
Adapter Cable
Raymarine Adapter Cable for SeaTalk 2 to SeaTalkng
|
40.90 |
|
|
Public lands and waters are the backbone of American outdoor recreation and now more than ever, Americans are eager for opportunities to recreate on these national treasures. But, our access is threatened by backlogged maintenance costs and lack of funding.
Without raising a dime in new taxes, the Great American Outdoors Act will restore and protect our public lands and waters – like docks, campgrounds, and trails – and maximize access to these national treasures.
Tell Congress to support the Great American Outdoors Act to fund our public lands and waters!
|
|
|
Jabsco 18777-0001-B Neoprene Impeller Kit
Neoprene impeller material for water pumping applications
Spline drive hub
10 impeller blades
2 1/4 in. diameter x 2 in. width x 5/8 in. shaft
Used in Jabsco 50410, 22110, and 23800 model crank shaft driven pumps
Impeller profile HH in Jabsco impeller identification charts
Replaces Jabsco 22120-0001, 18777-0001, 18777-01
Replaces Volvo Penta 876120
Replaces Marine Power 527272
|
37.18 |
|
|
SUP D-Ring & Bungee Kit
This kit is suitable for all Solstice Watersports SUPs
In the Box:
96" of 1/4" bungee cord
4 stainless D-rings & anchor pads
1 fl. oz. of vinyl cement
|
18.41 |
|
|
Minor Repair Kit for Sherwood RP-B-C
This kit contains the following items
SH 10103
1
VELLUMOID 505 FIBRE GASKET
SH 10615K
1
IMPELLER KIT
SH 10927
1
SEAL/SEAT ASSEMBLY
Kits are put together at time of order
|
95.65 |
|
|
Gianneschi SUPER LARIO 2 Bronze Hand Pump 1"
Gianneschi SUPER-LARIO-3, SUPER LARIO 3 Self Priming Double Acting Piston Pump, rated for 9.2 GPM, Bronze construction, Bronze impeller. Inlet Port is 1 Inch, Discharge Port is 1 Inch.
Applications for the SUPERLARIO3 include pumping aggressive liquids, bilge emptying, tanks, diesel oil intake, oil transfer.
|
2540.79 |
|
|
AMT Pump 5493-K8 1.5 X 2Hp Xss Pump Kit
|
455.63 |
|
|
12" x 18" Super Strong Trim Tab Kit w/o Switch -24V - Single Actuator
Lenco Electric Super Strong Trim Tab Kits were designed for sport-fishing boats, high speed cruising boats and large commercial vessels. 7 Gauge flat - 304 SS blades with all stainless steel mounting hardware withstand the rigors of the most demanding conditions. No spray or mist when mounted in recessed pockets. 3/8" diameter hinge pin and 3.75" sacrificial anode. All Super Strong Trim Tab Systems have Vandar Upper Mounting Brackets with Gland Seal and 10 gauge SS lower mounting brackets with 3/8" SS bolts
Actuator Part # 15063-002 (Super Strong 24-Volt Trim Tab Kit)
Specifications:
Suggested Boat Length: 24' to 40'
Length of Tab: 12"
Width of Tab: 18"
Blades: 7 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Switch Required: 10222-211D or 15070-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 24-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1036.84 |
|
|
12" x 18" Super Strong Trim Tab Kit w/o Switch -12V -Single Actuator
Lenco Electric Super Strong Trim Tab Kits were designed for sport-fishing boats, high speed cruising boats and large commercial vessels. 7 Gauge flat - 304 SS blades with all stainless steel mounting hardware withstand the rigors of the most demanding conditions. No spray or mist when mounted in recessed pockets. 3/8" diameter hinge pin and 3.75" sacrificial anode. All Super Strong Trim Tab Systems have Vandar Upper Mounting Brackets with Gland Seal and 10 gauge SS lower mounting brackets with 3/8" SS bolts
Actuator Part # 15056-002 (Super Strong 12-Volt Trim Tab Kit)
Specifications:
Suggested Boat Length: 24' to 40'
Length of Tab: 12"
Width of Tab: 18"
Blades: 7 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Switch Required: 10222-211D, 15069-001 or 15070-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1022.35 |
|
|
12" x 24" Super Strong Trim Tab Kit w/o Switch -24V - Single Actuator
Lenco Electric Super Strong Trim Tab Kits were designed for sport-fishing boats, high speed cruising boats and large commercial vessels. 7 Gauge flat - 304 SS blades with all stainless steel mounting hardware withstand the rigors of the most demanding conditions. No spray or mist when mounted in recessed pockets. 3/8" diameter hinge pin and 3.75" sacrificial anode. All Super Strong Trim Tab Systems have Vandar Upper Mounting Brackets with Gland Seal and 10 gauge SS lower mounting brackets with 3/8" SS bolts
Actuator Part # 15063-002 (Super Strong 24-Volt Trim Tab Kit)
Specifications:
Suggested Boat Length: 27' to 44'
Length of Tab: 12"
Width of Tab: 24"
Blades: 7 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Switch Required: 10222-211D or 15070-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 24-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1176.35 |
|