|
Fits: O.M.C. 55-75 HP 3-cylinder. Replaces: OMC 384777, 386657, 391735, 585050, 585058, 586281. 9-tooth drive gear. Uses DV370* replacement drive gear, DVK70* 2-piece drive kit (fits current-model starters), SR370 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older O.M.C. outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
215.00 |
|
|
Fits: OMC 25-35 HP 3-cyl - 1997-99. Replaces: OMC 586277. 10-tooth drive gear. Uses DVK98 2-piece replacement drive kit, SR398 repair kit.
|
189.56 |
|
|
Johnson/Evinrude Outboard Starter - 9 Tooth (Early Model)
The outboard starter will fit BRP-OMC 55-75 HP, 3-cyl, 9-tooth drive gear.
ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.
Features:
Dynamically tested and packaged for out-of-the-box performance
Nickel-coated and epoxy-painted to reduce corrosion
Sealed to minimize water intrusion
Designed for long life and optimum performance
Armatures are tested to withstand 50 times operating voltages (12 volts)
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Replaces:
BRP-OMC 383691
BRP-OMC 384777
BRP-OMC 386657
BRP-OMC 391735
BRP-OMC 585050
BRP-OMC 585058
BRP-OMC 585197
BRP-OMC 586281
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
173.23 |
|
|
Fits: OMC 20-35 HP 2-cyl - 1987-93. Replaces: OMC 583473, 585059. 9-tooth drive gear. Uses *DV390 replacement drive gear, *DVK90 2-piece drive kit (fits current-model starters) SR390 repair kit.*NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
180.50 |
|
|
Fits: OMC 50-60 HP 2-cylinder. Replaces: OMC. 384163, 387684, 389275, 585063, 586280. 9-tooth drive gear. Uses DV371* replacement drive gear, DVK71* 2-piece drive kit (fits current-model starters), SR371 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
196.32 |
|
|
Fits: OMC 25, 40, 50 HP; 2-cyl - 1989-Up; 48-50 HP - 1990-Up. Replaces: OMC. 583482, 585056. 9-tooth drive gear. Uses *DV389 replacement drive gear, *DVK89 2-piece drive kit (fits current-model starters), SR389 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
202.41 |
|
|
Fits: OMC 85-140 HP late-model V4. Replaces: O.M.C. 385529, 389954, 585051, 585057, 586283. Small 10-tooth drive gear. Uses DV372* replacement drive gear, DVK72* 2-piece drive kit( fits current-model starters), SR372 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
180.12 |
|
|
Fits: OMC 18-40 HP. Replaces: OMC 386591, 392133, 585061, 586278. 11-tooth drive gear. Uses DV376* replacement drive gear, DVK76* 2-piece drive kit (fits current-model starters), SR376 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
173.45 |
|
|
Fits: OMC 150-235 HP V6. Replaces: OMC 387094, 395207, 585062, 586288. 8-tooth drive gear. Uses DV373 replacement drive gear, SR373 repair kit.
|
202.64 |
|
|
Fits: OMC 85-115 HP- 1969-1970, 85-125 HP - 1971-1972. Replaces: O.M.C. 383575, 384914. Large 10-tooth drive gear. Uses DV372X replacement drive gear, SR372 repair kit.
|
215.00 |
|
|
Scot Pump 189-001-157-3.75 IMPELLER 3.75" 48378 X&J
|
139.23 |
|
|
Scot Pump 189-001-300-3.75 IMPELLER 3.75" 48377/78X
|
141.44 |
|
|
March TE-7K-MD 3.5" 3PH 3Ph 3/4 Hp 3.5" Imp Pump
|
1299.60 |
|
|
Fits OMC 60, 70, 90, 115, 150, 175, 200, 225 HP - 1991-Up, 120, 140 HP - 1991-94, 50 HP 3-cyl, 60 HP, V4 130 HP - 1995-UP, 115-200 HP - 1997-Up, 225 HP - 1998-99. 2-wire connection with female spade terminal ends, flat-blade shaft. Includes O-ring and adaptor to replace motors with hollow hex shafts. 4-bolt mount.
|
217.08 |
|
|
Fits: OMC 1985-Up, 120-140 HP V4. Replaces: OMC. 393570, 585060, 586285. 10-tooth drive gear. Uses*DV386 replacement drive gear, *DVK86 2-piece drive kit (fits current-model starters), SR386 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
186.39 |
|