Fits: OMC 150-235 HP V6. Replaces: OMC 387094, 395207, 585062, 586288. 8-tooth drive gear. Uses DV373 replacement drive gear, SR373 repair kit.

Johnson/Evinrude Outboard Starter - V6 - 8 Tooth The outboard starter will fit BRP-OMC, 150-235 HP V6, and 8-tooth drive gear. ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit. Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: BRP-OMC 387094 BRP-OMC 395207 BRP-OMC 585062 BRP-OMC 586288 BRP-OMC 778992 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Fits: OMC 50-60 HP 2-cylinder. Replaces: OMC. 384163, 387684, 389275, 585063, 586280. 9-tooth drive gear. Uses DV371* replacement drive gear, DVK71* 2-piece drive kit (fits current-model starters), SR371 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!

Fits: OMC 85-140 HP late-model V4. Replaces: O.M.C. 385529, 389954, 585051, 585057, 586283. Small 10-tooth drive gear. Uses DV372* replacement drive gear, DVK72* 2-piece drive kit( fits current-model starters), SR372 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!

Fits: OMC 18-40 HP. Replaces: OMC 386591, 392133, 585061, 586278. 11-tooth drive gear. Uses DV376* replacement drive gear, DVK76* 2-piece drive kit (fits current-model starters), SR376 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!

Fits: OMC 20-35 HP 2-cyl - 1987-93. Replaces: OMC 583473, 585059. 9-tooth drive gear. Uses *DV390 replacement drive gear, *DVK90 2-piece drive kit (fits current-model starters) SR390 repair kit.*NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!

Fits: OMC 85-115 HP- 1969-1970, 85-125 HP - 1971-1972. Replaces: O.M.C. 383575, 384914. Large 10-tooth drive gear. Uses DV372X replacement drive gear, SR372 repair kit.

Fits: OMC 25-35 HP 3-cyl - 1997-99. Replaces: OMC 586277. 10-tooth drive gear. Uses DVK98 2-piece replacement drive kit, SR398 repair kit.

Fits: O.M.C. V4 and V6 (1997-Up 75/90/115 HP; 2003 90/105/115 Hp; 2003 60 HP). Replaces: O.M.C. 586287, 438878. Uses 9 tooth drive gear DV517 or 10 tooth drive gear DV518. Replacement jack shaft 9 tooth assembly JSA517, 10 tooth assembly JSA518. SR363 brush repair kit.

Original Equipment Quality Replacement Outboard Starter for BRP-OMC, 90-115 HP This outboard starter will fit BRP-OMC, 90-115 HP, 1997-UP, 60deg. V4, 1998-2000 80 HP, 1998-2000 100 HP  ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit. Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: BRP-OMC Outboard Starter 584980 BRP-OMC Outboard Starter 586284 SIERRA Outboard Starter 18-5632 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Fits: O.M.C. 55-75 HP 3-cylinder. Replaces: OMC 384777, 386657, 391735, 585050, 585058, 586281. 9-tooth drive gear. Uses DV370* replacement drive gear, DVK70* 2-piece drive kit (fits current-model starters), SR370 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older O.M.C. outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!

Fits: OMC 1985-Up, 120-140 HP V4. Replaces: OMC. 393570, 585060, 586285. 10-tooth drive gear. Uses*DV386 replacement drive gear, *DVK86 2-piece drive kit (fits current-model starters), SR386 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!

Fits: OMC 25, 40, 50 HP; 2-cyl - 1989-Up; 48-50 HP - 1990-Up. Replaces: OMC. 583482, 585056. 9-tooth drive gear. Uses *DV389 replacement drive gear, *DVK89 2-piece drive kit (fits current-model starters), SR389 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!

Heavy-duty trim/tilt motor only. Fits: 1997-UP 115 HP, 2000-UP 115 HP 4-Stroke, 1997-2000 130 HP, 1997-UP 150-200 HP, 1998-UP 225 HP. 2-wire connection, 4 bolt mount, ring terminal ends. Includes O-ring.

Zinc Yamaha Trim Tab Anode for 150 - 225 HP Motors A trim tab anode helps counteract the torque that a propeller creates, and levels out "prop-walk," which is a propeller's tendency to rotate concerning a vertical axis. Also, trim tab anodes can absorb various types of corrosion, helping alleviate corrosion to other parts of the boat. Features:  Designed for 150-225 HP Yamaha motors Meant for saltwater boat use Boat type: Motorboat with outboard Specific: Outboard Specifications: Material: Zinc Weight: (lbs) 1.15 / (kg) 0.52 Dimensions: h: (inch) 3.43" / (mm) 87 Ø: (inch) 3.94" / (mm) 100 m: (mm) 10 x 1.25 *Sold as an Individual