Stainless Steel Drain Cover - 3-1/4"  Stamped 304 Stainless Steel

Stainless Steel Deck Step 3-1/4" x 8-3/8" Injection Molded Rubber/Stamped 304 Stainless Steel These Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.

Stainless Steel Deck Step 2-1/4" x 8-3/8" Injection Molded Rubber/Stamped 304 Stainless Steel These Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.  

Stainless Steel Louvered Vent - 5" x 4-5/8"  Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.

Stainless Steel Butterfly Vent - Center Knob - 4"  Butterfly Vents promote air flow preventing mold, mildew, and associated odors. Features a center knob that allows for easy adjustment of the opening. Corrosion resistant 304 stainless steel construction. Installs with four #6 RH fasteners (not included).

Stainless Steel Deck Plate - 3"  Use with Sea-Dog® Deck Plate Keys 335680 or 335699 (not included). Use anti-seize lubricant to protect threads from galling.

Stainless Steel Louvered Vent - 9-1/8" x 4-5/8"  Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.

Stainless Steel Flag Pole Socket - 1" The 10° Flagpole Socket accepts flagpoles either 1” or 1-1/4” in diameter. Set screw holds flagpole in place. Maximum speed 10 MPH. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three #10 FH fasteners (not included).

Stainless Steel Bow Eye - 3/8" x 4-1/4" These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp ring style stern eyes. Can be used in conjunction with Lift Eyes (048330 or 048350) for a more robust lifting assembly.

Stainless Steel Chain Stopper - 3/16" - 1/4" Chain Stoppers help prevent damage to the windlass and reduce the risk of accidental free fall of the anchor while under way. Chain Stoppers mount alone or inside most bow rollers and work with your anchor roller to take tension off your windlass. Chain and rope should be secured at anchor when your windlass is not in use to avoid high loads the windlass was not designed for. 321820 fits chain sizes 3/16" - 1/4". 321825 fits chain sizes 5/16" - 3/8". Constructed of corrosion resistant formed 304 stainless steel.

Stainless Steel Cushion Clamp - 3-1/2" (89mm) - 10 Piece Features: Prevents corrosion Resistant to oils, acids, salt water Temperatures range from -50°F to 300°F/-46°C to 149°C Absorbs shock and vibration Reduces unwanted noise 1/4" clearance mounting hole 304 stainless steel WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Replacement Flag Pole - 30"  The flag is attached to the flagpole using nylon adjustable flagpole clips in conjunction with stainless steel, spring wire, quick release clips which allows mounting flexibility for a variety of flag or pennant sizes.  Maximum speed 10 MPH.

BURKS 320GA5-1 1/4, Bronze Fitted Cast Iron Centrifugal Pump 230/460v Bronze Fitted Cast Iron Construction. Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.88 Inches.   Burks end suction, three phase, close-coupled, bronze fitted, centrifugal pump with mechanical seal. They are ideal for booster service, recirculation, general water supply, and washer lines.   Construction: Casing and bracket are close grain cast iron. Enclosed 4-7/8" bronze impeller, 302 stainless steel motor shaft, single mechanical seal, carbon faces, buna elastomers, 304 stainless steel metal parts.  Connections: 1-1/2" X 1-1/4" female NPT suction and discharge Motor: 2 HP, 3450 RPM, Open drip proof, three phase, 208/230/460 volts, 60 Hz, ball bearings front and back, built-in overload protection.    Clockwise rotation, when facing back of motor. Maximum working pressure: 200 PSI Maximum inlet pressure: 70 PSI Maximum working temperature: 180 degrees Fahrenheit Carton dimension: 14" high, 12" wide, 24" long.   Please Contact us for shipping quote at http://www.clrmarine.com/Contact_Us

Stainless Steel Rail Mount Flagpole - 17" The Sea-Dog® Rail Mount Flagpole is constructed of stainless steel with a UV resistant injection molded nylon rail mount bracket and split rings for easy flag attachment. Maximum speed 10 MPH.

Stainless Steel Midget Vent - Small  Midget Vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables and wires or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Corrosion resistant stamped 304 stainless steel construction. Easy to install with pre-drilled holes for three #6 RH fasteners (not included).