|
BURKS 320GA5-1 1/4, Bronze Fitted Cast Iron Centrifugal Pump 230/460v
Bronze Fitted Cast Iron Construction. Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.88 Inches.
Burks end suction, three phase, close-coupled, bronze fitted, centrifugal pump with mechanical seal. They are ideal for booster service, recirculation, general water supply, and washer lines.
Construction: Casing and bracket are close grain cast iron. Enclosed 4-7/8" bronze impeller, 302 stainless steel motor shaft, single mechanical seal, carbon faces, buna elastomers, 304 stainless steel metal parts.
Connections: 1-1/2" X 1-1/4" female NPT suction and discharge Motor: 2 HP, 3450 RPM, Open drip proof, three phase, 208/230/460 volts, 60 Hz, ball bearings front and back, built-in overload protection.
Clockwise rotation, when facing back of motor. Maximum working pressure: 200 PSI Maximum inlet pressure: 70 PSI Maximum working temperature: 180 degrees Fahrenheit Carton dimension: 14" high, 12" wide, 24" long.
Please Contact us for shipping quote at http://www.clrmarine.com/Contact_Us
|
1794.60 |
|
|
BURKS 375G6-2", Centrifugal Pump 3PH 7.5HP 230/460v
Centrifugal Pump and Motor unit.
Bronze Fitted Cast Iron Construction.
Close Coupled to a 7-1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 2-1/2 Inches NPT Inlet, 2 Inches NPT Outlet.
Impeller Diameter is 6.06 Inches.
UNSPSC Code: 40150000
|
3777.75 |
|
|
BURKS 375G6-2-5.88, BRONZE FITTED CENTRIFUGAL PUMP
Closed coupled centrifugal pump having 2-1/2" NPT Inlet x 2" NPT Outlet
features a voltage rating of 230/460 VAC
6.06 in impeller
Bronze fitted
UNSPSC Code: 40150000
|
3777.75 |
|
|
BURKS T37CT7MV, TURBINE PUMP 60 VOLTS 3PH 3/4HP
Bronze Fitted Cast Iron Construction.
Seal and O-ring are VITON.
Pump is close Coupled to a 3/4 Horsepower , 3450 RPM, 208-230/460 HZ , 60 Volt, 3 Phase, TEFC Motor.
Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.
UNSPSC Code: 40150000
|
2388.60 |
|
|
The March 320-AP-MD has the durability for continuous duty in applications requiring low flow and high head. Typical applications include laser cooling, medical systems, filter systems, and various processing equipment in the electronics industry.
March Pump's industrial 320-AP-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3.3 gallons per minute at 1 feet, and its maximum head is 40 Feet (or around 17PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, and Ceramic. The inlet connection is 0.5 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.083 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March 320-AP-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
3.3 GPM
11.3 LPM
Max Head
40 FT
8.8 M
Power
.083 HP
.062 KW
Electrical
115V 50/60HZ or 230V 50/60Z
Type
Centrifugal Mag Drive
Inlet
5/8"OD
Outlet
1/2"OD
Wet End
Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft and Thurst Washer)
Motor Options
Air Cooled or Blast Cooled
|
675.00 |
|
|
Applications for the MDX-3-1/2 Magnetic Drive Pump include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioning.
March Pump's industrial MDX-3-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 8 gallons per minute at 1 foot, and its maximum head is 19 Feet (or around 8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, carbon filled Kynar (PVDF), Ryton Buna N, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheitor 87 Celsius. The March MDX-3-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
8.5 GPM
30 LPM
Max Head
19 FT
4 M
Power
.04 HP
.029 KW
Electrical
115V 50/60HZ or 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1/2"OD
Outlet
1/2"OD
Wet End
Polypropylene (Front Housing and Impeller), Carbon filled Kynar (Rear Housing, Shaft), Ryton (Thrust Washer), Buna N (O-Ring), Stainless Steel (Screw) Ceramic Magnet
|
328.58 |
|
|
Applications for the March AC-1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-1/2 Part # 0115-0064-0200 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-1/2 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March AC-1A-MD-1/2 is suitable for your application, please contact March Pump.
Unit System 60Hz 50Hz Max Flow
3 GPM
9 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1/2"OD
Outlet
1/2"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
Part # 0115-0064-0200
|
202.80 |
|
|
March 1A-MD-1/2 Mag Drive Pump
March Pump's industrial 1A-MD-1/2 is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.5 Feet (or around 2PSI). The 1A-MD-1/2 pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, and Stainless Steel. When submerged, Epoxy, Noryl, and the SJT Cord are also in contact with the solution. The inlet connection is 1/2 inch smooth, and the outlet is 1/2 inch smooth. The standard motor is a 1 Phase 230V 0.005 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 160 Celsius in open air, or 87 Fahrenheit or 71 Celsius if submerged. The March 1A-MD-1/2 centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals. To determine if the March 1A-MD-1/2 is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the 1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
Great for Chemicals Including
The 1A-MD-1/2 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals.
Inlet: 1/2"OD
Outlet: 1/2"OD
Wet End: Polypropylene (Front Housing, Rear Housing, Impeller), Buna N (O-Ring), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft)
Uses:Submersible or Open Air
When submerged, the following is also in contact with the solutionEpoxy, Noryl, SJT Cord
P/N 0115-0007-0700 (230V)
|
320.78 |
|
|
Little Giant Submersible Pump 500500
Little Giant 1-AA-18 Submersible Pump
Little Giant Submersible Pump, 115 Volt 60Hz 1/200 HP Permanently Lubricated Oil Filled Motor, 170GPH at 1 Foot Head, Shutoff Head 7 Feet, Inlet: Snap Off Screen, Outlet: 1/4" MNPT with Elbow for 1/2" Tubing, Epoxy Coated Aluminum Housing, Fluid Temperature Up to 120F (49C), UL/CSA Listed, 18 Foot Power Cord
500500 For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated. This pump is not recommended for aquariums, swimming pools and fuel oil transfer
|
191.10 |
|
|
AMT Pump 3152-95 Centrifugal Pump Cast Iron
Heavy Duty Straight Centrifugal Pump
HP: 5
Voltage: 230/460
Phase: 3
Type: Totally Enclosed, Fan Cooled
Motor Frame Size: 184JM
Shaft Seal Material: Buna-N / Stainless Steel
AMT Crossover Model for Flint & Walling C55A503T
|
1437.76 |
|
|
BURKS 23922, Centrifugal Pump 2 hp Bronze Impeller
|
2927.33 |
|
|
BURKS 320G6-1 1/4, CENTRIFUGAL PUMP 230/460v 3PH 2HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 5.13 Inches
|
2059.20 |
|
|
BURKS 35G5-1 1/4, Centrifugal Pump 3PH 1/2HP 230/460v
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.
Impeller Diameter is 3.63 Inches.
UNSPSC Code: 40150000
|
1565.10 |
|
|
BURKS 320CS6M, TURBINE PUMP 230/460V 3PH 2HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
Please Contact us for a shipping quote http://www.clrmarine.com/Contact_Us
|
3085.16 |
|
|
BURKS 320CS7M, TURBINE PUMP 230/460v 3PH 2HP
All BRONZE Construction.
Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
Please Contact us for a shipping quote http://www.clrmarine.com/Contact_Us
|
3085.16 |
|