|
B164 1kW Tilted Element 0° - 8-Pin
Step up to a 1kW without a Fairing!
Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
Depth and Temperature
50/200 kHz
1kW RMS
High-Performance
0° Tilt
Bronze
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1101.13 |
|
|
B164 1kW Tilted Element 20° - 8-Pin
Garmin's bronze, thru-hull mount transducer with 20° tilt provides depth and temperature data. Garmin's transducer has an operating frequency of 50 or 200 kHz and mounts on a 16-24° deadrise angle.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
944.99 |
|
|
B164 1kW Tilted Element 12° - 8-Pin
Garmin's bronze, thru-hull mount transducer with 12° tilt provides depth and temperature data. Garmin's transducer has an operating frequency of 50 or 200 kHz and mounts on a 8-15° deadrise angle.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1101.13 |
|
|
B60 600W Tilted Element 12° - 8-Pin
This entry-level tilted bronze transducer accommodates deadrise angles of 8 to 15 degrees without a fairing.
An excellent choice for fiberglass and wood hulls, this 600W 8-pin transducer has a depth of 800' to 1,200'; an operating frequency of 50 to 200 kHz; and a beamwidth of 45 to 12 degrees.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
*Do not use on metal hulls. When using with a 6-pin Garmin sounder, a transducer adapter cable is required.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
292.49 |
|
|
B60 600W Tilted Element - 8-Pin
Garmin's bronze, thru-hull mount transducer with 20° tilt provides depth and temperature data. Garmin's transducer has an operating frequency of 50 or 200 kHz and mounts on a 16-24° deadrise angle.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
292.49 |
|
|
B164-12 12° 1kW Tilted Element Transducer with 6-Pin Connector
Features:
Depth/Temp
50/200 kHz
1 kW RMS
High-performance
Bronze
Step up to a 1kW Without a Fairing!
Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1101.13 |
|
|
B164-20 20° 1kW Tilted Element Transducer with 6-Pin Connector
Features:
Depth/Temp
50/200 kHz
1 kW RMS
High-performance
Bronze
Step up to a 1kW without a Fairing!
Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1101.13 |
|
|
xSonic SS175H-W/20 Stainless Steel Chirp Transducer - 20° 1KW Tilted Element - 9 Pin Connector
SS175H-W/20 CHIRP Transducers enable bottom detection down to 300m+ with 5 to 10 times greater detail and Resolution so precise it's possible to distinguish between individual bait Fish, game Fish, and underwater structures.
*This Transducer is designed for smaller boats up to 36 feet (11 m).
Features
Frequencies: 130-210 kHz @ 25° constant beamwidth
16° - 25° Deadrise
300m+ Usable Depth
6m+ or large Boat size with Steel or Aluminum hulls
Depth & Temperature
CHIRP Technology
High-Performance
Stainless Steel
Exclusive Transducer ID
9-Pin Connector, 10M Cable
|
1458.80 |
|
|
B164 12 degree 1kW Tilted Element
Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted
Element™ technology to a higher power. The new 1kW, flush-mount, tilted
element transducers are perfect for fast, trailered tournament sport fishing
vessels who cannot have a high-performance fairing. The flush mounted,
bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can
sit on trailer rollers and bunks with no damage at all. The ceramic arrays
are tilted inside the housing giving you the perfect vertical beam with
maximum energy on what is directly below your boat. Take your fishfinder to
the next power with 1kW tilted element transducers.
12 degree tilted version for 8 to 15 degree hull deadrise
Compatible with Lowrance HDS Series and Simrad NSE Series Multifunction Display units.
Features:
Depth/Temp
50/200 kHz
1 kW RMS
High-performance
7 pin Blue Connector
Bronze
12 degree
|
1140.00 |
|
|
B164 1kW 20° Thru-Hull Transducer with Blue Connector
Step up to a 1kW - Without a Fairing!Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all.
Low-profile protrusion below the hull - no affect on your boats running performance
The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW (1,000 Watts) RMS Power
Frequency: 50/200 kHz
Cone: 50 kHz - 22° x 20° / 200 kHz - 6° x 6°
Maximum Depth Range: 50 kHz - 353M to 529M (1,200' to 1,800') / 200 kHz - 152M to 235M (500' to 800')
Engineered for center-console and trailered boats
Interfaces to any 600W or 1 kW echosounder
Bronze (B164) Housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Usable Shaft Length: 71mm (2.80")
Fixed 20° tilted version for 16° to 24° hull deadrise
10M Cable included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
B164 Tilted Element™ 10 Pin
12°
Features:
Depth/Temp
50/200 kHz
1 kW RMS
High-performance
Bronze
Step up to a 1kWWithout a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1061.33 |
|
|
B164 Tilted Element
0 degree tilted version
Features:
Depth/Temp
50/200 kHz
High-performance
Bronze
Step up to a 1kW Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
B164 Tilted Element™
20 degree titled version is designed for 16 degree - 24 degree deadrise angles.
for use with Raymarine DSM250, DSM300 sounder modules
Features:
Depth/Temp
50/200 kHz
1 kW RMS
High-performance
Bronze
Step up to a 1kW Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.
|
1187.22 |
|
|
B164 Tilted Element™
0°
Features:
Depth/Temp
50/200 kHz
1 kW RMS
High-performance
Bronze
Step up to a 1kW Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.
|
1239.98 |
|
|
B164 Tilted Element™
20°
Features:
Depth/Temp
50/200 kHz
1 kW RMS
High-performance
Bronze
Step up to a 1kWWithout a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1061.33 |
|