B164 Tilted Element™ 20 degree titled version is designed for 16 degree - 24 degree deadrise angles. for use with Raymarine DSM250, DSM300 sounder modules Features: Depth/Temp 50/200 kHz 1 kW RMS High-performance Bronze Step up to a 1kW Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.

B164 Tilted Element™ 12 degree titled version is designed for 8 degree - 15 degree deadrise angles For use with Raymarine DSM250 or DSM300 sounder modules Features: Depth/Temp 50/200 kHz 1 kW RMS High-performance Bronze Step up to a 1kWWithout a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.

B164 Tilted Element™ 0° Features: Depth/Temp 50/200 kHz 1 kW RMS High-performance Bronze Step up to a 1kW Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.

B164 Tilted Element™ 20° Features: Depth/Temp 50/200 kHz 1 kW RMS High-performance Bronze Step up to a 1kWWithout a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B-60-20 Tilted Element Transducer Low profile tilted element for 16° to 20° deadrise hulls. Features: 600 Watts Dual 50/200kHz

B60-20 20° Tilted Element Transducer with 6-Pin The bronze B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull. Features: Depth/Temp 50/200 kHz 600w RMS Mid-performance Bronze WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

B164 Tilted Element 0 degree tilted version Features: Depth/Temp 50/200 kHz High-performance Bronze Step up to a 1kW Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B164 Tilted Element™ 10 Pin 12° Features: Depth/Temp 50/200 kHz 1 kW RMS High-performance Bronze Step up to a 1kWWithout a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B175L Bronze Low Profile Thru Hull 20° Tilted Element Transducer 1kW Features Material: Bronze For use with CP450C or CP470 Chirp Sonar Module Power (RMS): 1Kw Max Depth(ft): 2,500 Frequency (khZ): 40-60 Beam Width(L/H): 32°-21° Records: Depth / Temperature Approved Hull Material: Fiberglass / Wood Cable Length (Ft/M): 33ft / 10M Supported Deadrise / Transom Angles: 16-24° Deadrise Note: Using a Single B175 or B75 requires the A80328 Single Operation Cable

xSonic SS175H-W/20 Stainless Steel Chirp Transducer - 20° 1KW Tilted Element - 9 Pin Connector SS175H-W/20 CHIRP Transducers enable bottom detection down to 300m+ with 5 to 10 times greater detail and Resolution so precise it's possible to distinguish between individual bait Fish, game Fish, and underwater structures. *This Transducer is designed for smaller boats up to 36 feet (11 m). Features Frequencies: 130-210 kHz @ 25° constant beamwidth 16° - 25° Deadrise 300m+ Usable Depth 6m+ or large Boat size with Steel or Aluminum hulls Depth & Temperature CHIRP Technology High-Performance Stainless Steel Exclusive Transducer ID 9-Pin Connector, 10M Cable

B164-20 20° 1kW Tilted Element Transducer with 6-Pin Connector Features: Depth/Temp 50/200 kHz 1 kW RMS High-performance Bronze Step up to a 1kW without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

B164-12 12° 1kW Tilted Element Transducer with 6-Pin Connector Features: Depth/Temp 50/200 kHz 1 kW RMS High-performance Bronze Step up to a 1kW Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

B164 12 degree 1kW Tilted Element Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with 1kW tilted element transducers. 12 degree tilted version for 8 to 15 degree hull deadrise Compatible with Lowrance HDS Series and Simrad NSE Series Multifunction Display units. Features: Depth/Temp 50/200 kHz 1 kW RMS High-performance 7 pin Blue Connector Bronze 12 degree

B164 1kW 20° Thru-Hull Transducer with Blue Connector Step up to a 1kW - Without a Fairing!Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. Low-profile protrusion below the hull - no affect on your boats running performance The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer. Features: 1 kW (1,000 Watts) RMS Power Frequency: 50/200 kHz Cone: 50 kHz - 22° x 20° / 200 kHz - 6° x 6° Maximum Depth Range: 50 kHz - 353M to 529M (1,200' to 1,800') / 200 kHz - 152M to 235M (500' to 800') Engineered for center-console and trailered boats Interfaces to any 600W or 1 kW echosounder Bronze (B164) Housing Depth and fast-response water-temperature sensor Boat Size: 8M to 11M (25' to 35') Usable Shaft Length: 71mm (2.80") Fixed 20° tilted version for 16° to 24° hull deadrise 10M Cable included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B175H-W 1KW Bronze Thru Hull 20° Tilted Element Installation: Thru Hull Material: Urethane Power (RMS): 1kW Max Depth(ft): 800 Frequency (KHz): 150-250 Records: Depth and Temperature Approved Hull Material: Fiberglass / Wood Cable Length (ft/M): 6ft/2m Supported deadrise: 16-24° Deadrise ADDITIONAL NOTES: All wide beam products come with a 2M pigtail off the transducer. Requires a Transducer Extension cable for a Complete Transducer Installation. 10m Extension Cable part number A80327 and A80328 Single B75/B175 operation cable.