|
GS-2-25 Grounding Strap - 2" x 25'
This grounding strap is an ideal conductor for RF grounding of SSB radios and other noise-sensitive transceivers, for bonding thru-hulls, etc.
Features:
Flexible (easily conforms to vessel contours)
.01 in. (25mm) thick
Specifications:
Width (in./cm): 2/5.1
Length (ft./m): 25/8
Weight (lbs/kg): 3/1.4
|
106.85 |
|
|
GS-2-100 Grounding Strap - 2" x 100'
This grounding strap is an ideal conductor for RF grounding of SSB radios and other noise-sensitive transceivers, for bonding thru-hulls, etc.
Features:
Flexible (easily conforms to vessel contours)
.01 in. (25mm) thick
Specifications:
Width (in./cm): 2/5.1
Length (ft./m): 100/33
Weight (lbs/kg): 8/3.6
|
422.41 |
|
|
GS-2-50 Grounding Strap - 2" x 50'
This grounding strap is an ideal conductor for RF grounding of SSB radios and other noise-sensitive transceivers, for bonding thru-hulls, etc.
Features:
Flexible (easily conforms to vessel contours)
.01 in. (25mm) thick
Specifications:
Width (in./cm): 2/5.1
Length (ft./m): 50/17
Weight (lbs/kg): 5/2.3
|
212.75 |
|
|
2000lb 2-Speed Winch - Strap Not Included
Features
Make light work of heavy load with Fulton brand two-speed winches. One fast speed for quick pull-in, a seconds low speed for increased mechanical advantage.
Our shift lock design allows changing gears without moving the crank handle from shaft to shaft. Just lift the shift lock and slide the shaft into the desired gear position. Shift lock holds the shaft in gear.
Neutral, free-wheel position allows quick line pay out without spinning the handle.
5 year limited warranty
Specs:
Capacity (lbs.): 2,000
Handle Length: 10"
Gear Ratio: 4.1:1 & 9.8:1
Strap: 20' x 2"
Hub Size: 1"
Hand Brake: optional
Strap Included: Yes
WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
137.20 |
|
|
2600lb 2-Speed Winch - Strap Not Included
Winch, 2600 lbs., 2-Speed
Features
Make light work of heavy load with Fulton brand two-speed winches. One fast speed for quick pull-in, a seconds low speed for increased mechanical advantage.
Our shift lock design allows changing gears without moving the crank handle from shaft to shaft. Just lift the shift lock and slide the shaft into the desired gear position. Shift lock holds the shaft in gear.
Neutral, free-wheel position allows quick line pay out without spinning the handle.
5 year limited warranty
Specs:
Capacity (lbs.): 2,600
Handle Length: 10"
Gear Ratio: 5.1:1 & 12.2:1
Strap: 20' x 2" (Not Included)
Hub Size: 1"
Hand Brake: optional
Strap Included: No
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
159.14 |
|
|
Series 19 C-Track Slide - Saddle Top & Spring Loaded Stop - 71mm(2-25/32") Length
Features:
Spring-loaded plunger pins for fast positive positioning
Chrome-plated brass slides
Applications
Dinghy and small catamaran jib sheet leads
Adjustable hiking strap systems
Specifications:
Length: 71mm(2-25/32")
M.W.L. 225kg(500lbs)
B.L. 450kg(990lbs)
Weight:70g(2.5oz)
|
22.74 |
|
|
2" x 5" Rectangle Base with 2.25" Ball
The RAM-D-202U-25 consists of a 2.25" diameter rubber ball connected at right angles to a 2" x 5" rectangular base. This mount has pre-drilled holes at each corner of the base.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 2.25" Rubber Ball Size
Weight: 0.69 lbs.
|
31.96 |
|
|
11" x 3" Rectangle Universal Electronics Base with 2.25" Ball
The RAM-D-111BU, universal mounting plate, consists of a 2.25" diameter rubber ball, connected at right angles to a flat 11" x 3" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 2.25" Rubber "D" Ball Size
Weight: 1.25 lbs.
*Note: The "U" in the part number reflects product packaged in poly bag. This plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
45.34 |
|
|
RAM Mount 2.25" Ball Mount with 3.68" Round Base & 2" x 5" Rectangular Base for Humminbird HELIX 9, 10 & 12
The RAM-D-202-25-C-202, powder coated marine grade aluminum mount, consists of a double socket arm, one round 3.68" diameter round base and one 2" x 5" rectangular plate. The round plate contains two mounting holes at 180-degrees and three mounting holes at 120-degrees. The rectangular plate contains a 4-hole pattern of 1.5" x 4.5". The patented rubber ball and socket technology dampens shock and vibration, and allows for nearly infinite adjustability, So you can set your device at the perfect veiwing angle, while suited for any rugged environment.
Compatible Devices:
Humminbird Helix 9
Humminbird Helix 10
Humminbird Helix 12
Specifications:
Overall Length: 7.875"
Weight Capacity: Up to 15 lbs.
Weight: 3.07 lbs.
|
101.27 |
|
|
RAM 75mm x 75mm VESA 3.625" Plate w/ 2.25" Diameter Ball
This RAM-D-2461U consists of a 2.25" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern. The rubber ball is positioned 0.88" from the center of one edge.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
2.25" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag. The
|
27.78 |
|
|
50mm x 100mm Half VESA Plate Adapter with D Size 2.25" Ball
The RAM-D-243U consists of a 2.25" diameter rubber ball, connected at right angles to a square 2.81" x 5" plate.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 2.25" Rubber Ball Size
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 0.8 lbs.
|
33.00 |
|
|
Stainless Steel Stud 1.25" Base 1/4 x 20 Threads 2.25" Tall - 10 Pieces
The stainless steel stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs in shear. All studs have 1/4 x 20 threads. Use for hanging panels, through deck mounts and many other uses.
|
50.21 |
|
|
2.25" Tall Stainless Stud w/#10 x 24 Thread
Utilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. These studs can be bonded from either surface of the base plate.
|
46.66 |
|
|
2" x 3" Rectangle Base with 2.25" Ball
Contains a 2.25" diameter rubber ball connected at right angles to a 2" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base.
|
23.81 |
|
|
D Size 2.25" Ball Mount w/11" X 3" Rectangle Plate, 3.68" Round Plate and Hi-Torq™ Wrench
The RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
The RAM-D-111U-C is Compatible With:
Garmin Fishfinders and GPS Chartplotters
Humminbird Fishfinders and GPS Chartplotters
Lowrance Fishfinders and GPS Chartplotters
Raymarine Fishfinders and GPS Chartplotters
Overall Height:
8.125"
Weight Capacity:
Up to 15 lbs.
Weight:
3.45 lbs.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
2.25" Rubber "D" Ball Size
Hi-Torq™ Wrench
The RAM handle wrench is designed to be used with the knob found on "D" size ball arms and mounts. The wrench matches the shape of the knob found on the side of "D" arms, and lets you give the arm an extra tight grip. This wrench was originally made for the military when using the RAM mounts in cold weather, and the knob could not be tightened by hand.
|
144.56 |
|