|
Recommended for low to high horsepower under regular use. May be used in freshwater and occasionally in saltwater. Use with aluminum and stainless propellers.
|
44.99 |
|
|
Interface Kit NavPilot 700 Series to Yamaha Helm Master
The FAP6310 is an optional interface kit that can be connected to the NavPilot 700 series, allowing it to control the Yamaha Helm Master system. The Yamaha Helm Master system consists of an NMEA2000 based network called EVC (Electric Vessel Control), and the system is controlled electrically. The NAVpilot 700 is interfaced with the EVC via two units: Autopilot Gateway and Interface Unit. The Autopilot Gateway and Interface Unit make up the FAP6310.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2026.67 |
|
|
Harness Extension 1M f/E/M/SR Series
This Add-a-Light Extension gives you an additional 1 meter of length to allow for more versatility and installation options. It features 16 AWG wire and a Deutsch connector. This harness extension is designed to be used with E-Series or SR-Series light bars that are 20" or longer.
Features:
16 AWG Wire
Deutsch Connector
Inline Fuse Holder
|
33.74 |
|
|
2007-2017 Jeep JK Dual D-Series A-Pillar Mount
All of RIGID’s grilles, OE Brackets, and Mounts are made with 100% stainless steel and covered with UV and abrasion resistant powder-coat to ensure years of use in the harshest conditions.
Features:
Aggressive RIGID Styling
Stainless Steel Construction
Black Powder Coat Finish
Includes All Necessary Hardware
∗ Lights sold separately
|
112.74 |
|
|
M-Q2 Series Drive/Down Diffused Spreader Light - Single
The Q-Series PRO is designed and built to withstand the harshest working environments imaginable. Constructed of the toughest and most durable materials available, including a double-pass TIG-welded stainless steel bracket with vibration isolator, the Q-Series PRO provides reliable, powerful LED light and is tough enough to withstand mining, agriculture, construction, and the oil and gas industries. The rugged construction also makes it well suited to extreme environments. If the application is severe, the Q-Series PRO is the ultimate lighting solution.
RIGID’s Q-Series PRO lights are also available with a durable white finish. Though suitable for marine applications, RIGID’s white lighting products are perfect for use anywhere an alternative to black is desired. The distinctive white is a durable UV-resistant powder coated finish with an additional chromate conversion coating for superior corrosion resistance. They feature the same legendary lighting technology and superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand.
Features:
GORE® Pressure Equalizing Vent
Unbreakable Polycarbonate Lens
Durable UV 3800 Polyester Powdercoat
IP68 Certified
MIL810-STDG Vibration Certified
ROHS Compliant
Over/Under Voltage Protection
Operating Temp -40º F +145º F
Sealed Deutsch Connector
50,000+ Hour Lifespan
Electrically Protected Against RFI/EMC Interference
Integrated Thermal Management System
Specifications:
Watts: 195
Amp Draw: 13.9
LED's: 24
Raw Lumens: 19008
Lux @ 10m: 445.87
Beam Distance: 211.2 m
Peak Beam Intensity: 44,587 cd
|
540.00 |
|
|
A/M-24 Series All Clear Automatic/Manual Inflatable Life Jacket - Grey - Adult
The Onyx A/M-24 Series All Clear Automatic/Manual Inflatable Life Jacket's low profile design provides you with comfort on the water while also keeping you safe and giving you peace of mind.
Features:
Convertible to Manual Only inflation mode (pull-cord and oral inflator tube)
All-Clear viewing window for an at-a glance look to make sure the vest is properly armed and ready to use (Green indicates you are properly armed, while Red shows you need to re-arm)
Lightweight low-profile design
Soft extended neoprene neckline for all day comfort
Quickburst® zipper for easier repacking
Inflation handle clips to life jacket to prevent snags
Durable nylon oxford fabric outer cover resists tears and punctures
Reflective material for increased visibility
Supplied with owner's manual and "Think Safe" booklet
Technical Specifications:
Chest Size - 30"-65"
Material - Nylon ripstop and oxford fabrics
|
184.74 |
|
|
A/M-24 Series All Clear Automatic/Manual Inflatable Life Jacket - Black/Red - Adult
The Onyx A/M-24 Series All Clear Automatic/Manual Inflatable Life Jacket's low profile design provides you with comfort on the water while also keeping you safe and giving you peace of mind.
Features:
Convertible to Manual Only inflation mode (pull-cord and oral inflator tube)
All-Clear viewing window for an at-a glance look to make sure the vest is properly armed and ready to use (Green indicates you are properly armed, while Red shows you need to re-arm)
Lightweight low-profile design
Soft extended neoprene neckline for all day comfort
Quickburst® zipper for easier repacking
Inflation handle clips to life jacket to prevent snags
Durable nylon oxford fabric outer cover resists tears and punctures
Reflective material for increased visibility
Supplied with owner's manual and "Think Safe" booklet
Technical Specifications:
Chest Size - 30"-65"
Material - Nylon ripstop and oxford fabrics
|
167.99 |
|
|
A-Series A-0 Buoy 8" Diameter - White
The A-Series is the product that launched the Polyform story. This all-purpose product, with the signature "blue rope hold" has proven itself in the most adverse conditions.
Marking gear used in heavy seas is no easy task. That's why more fishermen use Polyform A-Series than all other buoys combined. You name it, ocean, sea, or river, and the A-Series has been there.
Put your trust in Polyform's most versatile and well-known product.
Features:
Even wall thickness for maximum thickness
Heavy-duty reinforced ropeholds
Polyform's unique vinyl valve system
Dual valve inflation/deflation system
Excellent choice for a rafting fender
Technical Specifications:
Size - 8" x 11.5"
Eye Diameter - 0.6"
Circumference - 25.1"
Volume - 1.6 gallons
Boat Size - Up to 15'
*Sold as an Individual
|
37.57 |
|
|
For use with Sierra quart pumps or lower unit fill tubes.
|
7.49 |
|
|
Replacement rubber hub bushings for Solas props with pressed in hubs. Excellent gripping force to keep the prop from slipping, Rubber compound is strong and durable. Hydraulic press required to press hubs in and out of the prop. Unless noted, fits both aluminum and stainless steel propellers.
|
36.99 |
|
|
Prop hardware for Chrysler/Force, Mercury/Mariner, Mercruiser, Honda and Pleasurecraft motors.
|
56.40 |
|
|
Prop hardware for Chrysler/Force, Mercury/Mariner, Mercruiser, Honda and Pleasurecraft motors.
|
13.99 |
|
|
Sierra fuel fittings for Honda.
|
44.99 |
|
|
Sierra fuel fittings for Honda.
|
13.89 |
|
|
Sierra fuel fittings for Honda.
|
35.89 |
|