|
Replacement rubber hub bushings for Solas props with pressed in hubs. Excellent gripping force to keep the prop from slipping, Rubber compound is strong and durable. Hydraulic press required to press hubs in and out of the prop. Unless noted, fits both aluminum and stainless steel propellers.
|
36.99 |
|
|
Fits: 30-40 HP, 2-Stoke Suzuki, Tohatsu, Nissan. Replaces: Hitachi S108-94, S108-112, S108-120. Uses 9-tooth drive gear DV512, brush holder SR412.
|
342.24 |
|
|
Replacement rubber hub bushings for Solas props with pressed in hubs. Excellent gripping force to keep the prop from slipping, Rubber compound is strong and durable. Hydraulic press required to press hubs in and out of the prop. Unless noted, fits both aluminum and stainless steel propellers.
|
34.99 |
|
|
Gas Tank Base with 1" Ball for Honda, Suzuki, KTM, Yamaha and Victory Motorcycles
The RAM® Mounts Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be quickly accessible. This powder coated aluminum base mounts directly to the stock gas tank of your Honda, Suzuki, KTM, Yamaha and Victory motorcycles. We include the hardware you need to mount to the fill port as well.
Included Hardware:
Qty. 3 M6-1.0 x 25MM Socket Head Cap Screw
Qty. 4 M5-0.8 x 45MM Socket Head Cap Screw
Qty. 3 M5-0.8 x 35MM Socket Head Cap Screw
Qty. 3 M5-0.8 x 25MM Socket Head Cap Screw
Qty. 3 M5-0.8 x 20MM Socket Head Cap Screw
Qty. 3 M5-0.8 x 16MM Socket Head Cap Screw
Qty. 4 M5 Stainless Steel Flat Washer
Qty. 3 M6 Stainless Steel Flat Washer
Material:
Powder Coated Marine Grade Aluminum & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
28.57 |
|
|
Replacement rubber hub bushings for Solas props with pressed in hubs. Excellent gripping force to keep the prop from slipping, Rubber compound is strong and durable. Hydraulic press required to press hubs in and out of the prop. Unless noted, fits both aluminum and stainless steel propellers.
|
67.89 |
|
|
Replacement Outboard Tilt Trim Motor - Honda/Suzuki - 4 Bolt Mount
Quality Assurance:
Epoxy Powder coated for maximum corrosion protection
Motor shafts induction case hardened at bearing surfaces for superior wear resistance
Precision Testing:
All armatures tested to withstand 50 times operation voltage (12V)
All motors performance tested at 5 different load levels
All motors must meet or exceed OEM performance before being boxed
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Fits:
HONDA 2002-Up BF175, BF200, BF225, 4-bolt mount, Round Plug-In Connector. Includes O-ring.
SUZUKI 2002 and up 175, 200 & 225hp 4 Stroke
Replaces Part Numbers:
HONDA Tilt Trim Motor 36120-ZY3-013
SUZUKI Tilt Trim Motor DF140TLK2
SUZUKI Tilt Trim Motor DF140TXK2
SUZUKI Tilt Trim Motor DF140TXZK2
SUZUKI Tilt Trim Motor DT150TCXK2
SUZUKI Tilt Trim Motor DT225TCXGK2
SUZUKI Tilt Trim Motor DT225TCXK2
SIERRA Tilt Trim Motor 18-6742
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
329.96 |
|
|
3 Blade stainless propeller for Yamaha 50-130 and Nissan/Tohatsu 60-140 horsepower engines. Both with 15 tooth spline, thru hub exhaust and 4-1/4" Gear Case.
|
398.99 |
|
|
3 Blade stainless propeller for Yamaha 50-130 and Nissan/Tohatsu 60-140 horsepower engines. Both with 15 tooth spline, thru hub exhaust and 4-1/4" Gear Case.
|
398.99 |
|
|
Portable, simple-to-use interface works on Microsoft PC laptops, Windows tablets or Microsoft Surface tablet running Windows 10. Recommended requirements are Windows 10/Intel I5 Dual Core processor @2.5 Ghz or greater. Recommended I7 Quad Core at 2.5 Ghz or greater/USB 2.0 or USB 3.0 Port/10 GByte of free hard disc space, Recommended 50 GBytes or greater/2 GBytes RAM, Recommended 6 GBytes or greater. Tablets running Windows 10 with a USB port (*Note: Windows 8 RT will not work with M.E.D.S). Processor must be I5 Dual Core at 2.5 Ghz or better/Screen resolution 1360x768 or higher. No need to hassle with entering in the make, model or even the serial number of the engine you're working on. Simply plug in the cable and let M.E.D.S. do the work for you. Bundle includes M.E.D.S. system cable(s), diagnostic port adapter cables, three installations of the M.E.D.S. software on flash drive, and carrying case. DROP SHIPPED DIRECT FROM FACTORY, FREIGHT NOT ALLOWED.
|
6142.55 |
|
|
Portable, simple-to-use interface works on Microsoft PC laptops, Windows tablets or Microsoft Surface tablet running Windows 10. Recommended requirements are Windows 10/Intel I5 Dual Core processor @2.5 Ghz or greater. Recommended I7 Quad Core at 2.5 Ghz or greater/USB 2.0 or USB 3.0 Port/10 GByte of free hard disc space, Recommended 50 GBytes or greater/2 GBytes RAM, Recommended 6 GBytes or greater. Tablets running Windows 10 with a USB port (*Note: Windows 8 RT will not work with M.E.D.S). Processor must be I5 Dual Core at 2.5 Ghz or better/Screen resolution 1360x768 or higher. No need to hassle with entering in the make, model or even the serial number of the engine you're working on. Simply plug in the cable and let M.E.D.S. do the work for you. Bundle includes M.E.D.S. system cable(s), diagnostic port adapter cables, three installations of the M.E.D.S. software on flash drive, and carrying case. DROP SHIPPED DIRECT FROM FACTORY, FREIGHT NOT ALLOWED.
|
7428.20 |
|
|
New 9" & 12" e & c Series
Feature-Rich, HybridTouchTM & Non-Touch Multifunction Displays
Raymarine e-Series HybridTouchTM Displays
A New Look
The NEW e-Series 9" & 12" HybridTouch™ Displays - Make Them Your Own
Harness the full power of Raymarine navigation technologies with e-Series network multifunction displays. Each e-Series display features HybridTouch™, delivering the simplicity of touch screen control and the confidence of full keypad control when seas are rough.
Raymarine c-Series Multifunction Displays
A Smart New Shape For Marine Displays
The NEW c-Series - The Third Generation Multifunction Displays
New c-Series displays are available in 9" (c95/c97) or 12.1" (c125/c127) widescreen LCD formats with LED backlighting that is both super bright yet energy saving – up to 40% less than previous generation multifunction displays! Superior thermal management properties prevent darkening or screen blackouts at high temperatures. The bonded LCD screen eliminates condensation or contamination on the inside of the display, and maximises colour and contrast by preventing unwanted reflections.
New e-Series display's helm-friendly industrial design breaks away from box-like marine electronics, and offers a clean, unobtrusive display solution that looks great on any helm. A smart new shape for marine displays, the sleek, low-profile, bezel offers maximum display size with minimum footprint. The rugged and handsome design is complemented by flush, easy-press buttons and "hidden" memory card slots along the right hand side. An all new UniController offers precision control of the joystick cursor, rotary adjustments, and menu commands. Available with or without embedded cartography and built-in Sonar. c-Series network multifunction displays (MFD) are all-in-one navigation displays for boaters that demand performance and value. Controlled by a user-friendly keypad and Raymarine's exclusive LightHouse User Interface, c-Series puts in your command of charts, sonar, radar, and even thermal night vision. Also, making the switch from Raymarine Classic and Widescreen MFDs is easy, with our optional helm station adapters
|
|
|
Replacement trim/tilt relay Yamaha and Suzuki outboards. 12 Volt.
|
134.20 |
|
|
Replacement trim/tilt relay Yamaha and Suzuki outboards. 12 Volt.
|
134.20 |
|
|
Replacement rubber hub bushings for Solas props with pressed in hubs. Excellent gripping force to keep the prop from slipping, Rubber compound is strong and durable. Hydraulic press required to press hubs in and out of the prop. Unless noted, fits both aluminum and stainless steel propellers.
|
38.99 |
|
|
Replacement rubber hub bushings for Solas props with pressed in hubs. Excellent gripping force to keep the prop from slipping, Rubber compound is strong and durable. Hydraulic press required to press hubs in and out of the prop. Unless noted, fits both aluminum and stainless steel propellers.
|
49.89 |
|