3 Blade stainless propeller for 150-300 horsepower engines with 15 tooth spline and thru hub exhaust. 4-3/4" Gear Case.

SpeedZone Max3 - Right Hand - Stainless Steel Propeller - 3-Blade - 14.8" x 23 Pitch Introducing Turning Point Propellers SpeedZone Max3® high-performance 3-blade stainless steel bass boat propeller series. Extensive testing has shown improved performance against the best competitive brands in the market, making it One Furious Propeller™ for maximizing bass boat performance. Features: OAS octagon vents optimize aeration and low-end RPM. The exhaust escapes out of the open vent hole for faster planning times. 5 OAS options per vent hole (open, L, M, S, & closed). [L] & [Closed] are included with SpeedZone Max3 propellers. Compatible with Mercury® props using the PVS® System Maximizes: Maximizing SPEED: Higher top-end, get to that fishing spot faster. Maximizing LIFT: More boat lifts to help carry all gear and tech mounted up front. Maximizing HANDLING: Faster and safer turns with easier steering. Maximizing DURABILITY: Tournaments last longer with stronger blade sections. Maximizing ACCELERATION: Optimized Acceleration System™, for faster planning. MAXIMIZE the time fishing! Applications: SpeedZone Max3 for 150-300+hp outboards with 4.75-5.44” gearcases [Installation/Hub Kit Required]

SpeedZone Max3 - Right Hand - Stainless Steel Propeller - 3-Blade - 14.8" x 24 Pitch Introducing Turning Point Propellers SpeedZone Max3® high-performance 3-blade stainless steel bass boat propeller series. Extensive testing has shown improved performance against the best competitive brands in the market, making it One Furious Propeller™ for maximizing bass boat performance. Features: OAS octagon vents optimize aeration and low-end RPM. The exhaust escapes out of the open vent hole for faster planning times. 5 OAS options per vent hole (open, L, M, S, & closed). [L] & [Closed] are included with SpeedZone Max3 propellers. Compatible with Mercury® props using the PVS® System Maximizes: Maximizing SPEED: Higher top-end, get to that fishing spot faster. Maximizing LIFT: More boat lifts to help carry all gear and tech mounted up front. Maximizing HANDLING: Faster and safer turns with easier steering. Maximizing DURABILITY: Tournaments last longer with stronger blade sections. Maximizing ACCELERATION: Optimized Acceleration System™, for faster planning. MAXIMIZE the time fishing! Applications: SpeedZone Max3 for 150-300+hp outboards with 4.75-5.44” gearcases [Installation/Hub Kit Required]

SpeedZone Max3 - Right Hand - Stainless Steel Propeller - 3-Blade - 14.8" x 25 Pitch Introducing Turning Point Propellers SpeedZone Max3® high-performance 3-blade stainless steel bass boat propeller series. Extensive testing has shown improved performance against the best competitive brands in the market, making it One Furious Propeller™ for maximizing bass boat performance. Features: OAS octagon vents optimize aeration and low-end RPM. The exhaust escapes out of the open vent hole for faster planning times. 5 OAS options per vent hole (open, L, M, S, & closed). [L] & [Closed] are included with SpeedZone Max3 propellers. Compatible with Mercury® props using the PVS® System Maximizes: Maximizing SPEED: Higher top-end, get to that fishing spot faster. Maximizing LIFT: More boat lifts to help carry all gear and tech mounted up front. Maximizing HANDLING: Faster and safer turns with easier steering. Maximizing DURABILITY: Tournaments last longer with stronger blade sections. Maximizing ACCELERATION: Optimized Acceleration System™, for faster planning. MAXIMIZE the time fishing! Applications: SpeedZone Max3 for 150-300+hp outboards with 4.75-5.44” gearcases [Installation/Hub Kit Required]

Rod/Outrigger Holder - 1-5/8" x 16" x 1-1/2"- Pair Put absolutely no more holes in your T-Top or the gunnel of your boat. Simply place into your existing heavy duty cast stainless rod holder when outriggers are needed. When outriggers are not in use, simply remove holders and your existing cast rod holder is usable again.

2" Tall Stainless Stud w/3/8" x 16 Thread The HS200 stud is designed for heavy load applications such as mounting filters and panels. Thestud is inertial (friction) welded to a 2" base plate creating a very strong part. Manufactured of 304 stainless steel. Tensile strength is approximately 1,200 lbs. and shear strength is 1,500 lbs.

Stainless Steel Heavy Stud 2" Base 3/8" x 16 Thread 2" Tall - 25-Pack The HS200 stud is designed for heavy-load applications such as mounting filters and panels. The stud is inertial (friction) welded to a 2" base plate creating a very strong part. We offer two sizes. The stud is manufactured of 304 stainless steel. Tensile strength is approximately 1,200 lbs and shear strength is 1,500 Lbs.

3 Blade stainless interchangeable hub propeller for 115 and up horsepower engines with thru hub exhaust, 4-3/4" gear case. Category E prop. Requires RBX™ hub kit for installation.

3 Blade stainless propeller for Mercury 90+ horsepower outboard engines, select Mercruiser stern drive engines and Honda/Nissan/Tohatsu 115-250 horsepower engines. All with 15 tooth spline and thru hub exhaust. 4-3/4" gear case.

Zinc U-Bolt 7/16"-14 X 3-1/8" X 4" with Washers & Nuts - Square Zinc-plated u-bolt for mounting brackets & accessories to trailer frames. Features: Square bend Grade 5 7/16"-14 diameter/thread 3-1/8" W x 4" L *Comes packaged with nuts and washers.

Zinc U-Bolt 7/16"-14 X 3-1/8" X 3" with Washers & Nuts - Square Zinc-plated u-bolt for mounting brackets & accessories to trailer frames. Features: Square bend Grade 5 7/16"-14 diameter/thread 3-1/8" W x 3" L *Comes packaged with nuts and washers.

3/8" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray This hose is built with the best fuel and age-resistant formulations and a unique "Barrier Liner" on the inside surface of the tube, so the fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year.  Features:  Provides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone   Also, provides excellent rope-like bend-ability and fitting retention For both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%) EPA Certified and CARB Executive Order for low permeation Type B1-15 NMMA Type Accepted & CE certified Application: Marine Fuel Hose for distribution, return, vent and transfer For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel Construction: Tube: Fluoroplastic Internal Barrier Cover: Gray CPE Rubber Reinforcement: 2-Spiral Polyester Plies  Temperature Range: -20°F to 212°F (-28ºC to 100ºC) Length: 50’ (15m) Boxed Specifications: Inner Diameter: (inch) 3/8" / (mm) 9.50 Outer Diameter: (inch) 0.588 / (mm) 14.9 Burst Pressure: (psi) 175 / (mpa) 1.21 Working Pressure: (psi) 35 / (mpa) 0.24 Bend Radius: (inch) 4" / (mm) 101.6 Weight: (lb/100 ft.) 10.5 / (kg/m) 0.156 Permeation Rate (Standard is (15g/m^2/24hrs (CE10)): 5.0 *The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15

3/8" x 15' Nylon Double Braid Dock Line - Grey  Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque-balanced construction, and a unique stabilization process, which produces this long-wearing line that resists kinking. Applications: Dock line - ≤55' (16.8 M) vessel Mooring line - ≤ 30' (9.1 M) vessel  Technical Specifications: Color: Grey Material: Double braid nylon  Rope Diameter: 3/8"  Rope Length: 15' Tensile Strength: 13,100 lb *Sold as an Individual

3/8" x 25' Nylon Double Braid Dock Line - Grey  Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque-balanced construction, and a unique stabilization process, which produces this long-wearing line that resists kinking. Applications: Dock line - ≤55' (16.8 M) vessel Mooring line - ≤ 30' (9.1 M) vessel  Technical Specifications: Color: Grey Material: Double braid nylon  Rope Diameter: 3/8"  Rope Length: 25' Tensile Strength: 13,100 lb *Sold as an Individual

5/8" x 15' Nylon Double Braid Dock Line - Grey  Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque-balanced construction, and a unique stabilization process, which produces this long-wearing line that resists kinking. Applications: Dock line - ≤55' (16.8 M) vessel Mooring line - ≤ 30' (9.1 M) vessel  Technical Specifications: Color: Grey Material: Double braid nylon  Rope Diameter: 5/8"  Rope Length: 15' Tensile Strength: 13,100 lb *Sold as an Individual