Stainless Steel Heavy Stud 2" Base 3/8" x 16 Thread 2" Tall - 25-Pack The HS200 stud is designed for heavy-load applications such as mounting filters and panels. The stud is inertial (friction) welded to a 2" base plate creating a very strong part. We offer two sizes. The stud is manufactured of 304 stainless steel. Tensile strength is approximately 1,200 lbs and shear strength is 1,500 Lbs.

Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1.25" Tall - 100 Pack Weld Mount offers wire tie mounts, hose, and cable clamps, studs, standoffs, and floating nutplates. All of the fasteners are mounted with our unique non-sag acrylic adhesives which hold the parts in place on a vertical or overhead surface providing a permanent high strength bond.

Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1.5" Tall - 100 Pack Weld Mount offers wire tie mounts, hose, and cable clamps, studs, standoffs, and floating nutplates. All of the fasteners are mounted with our unique non-sag acrylic adhesives which hold the parts in place on a vertical or overhead surface providing a permanent high strength bond.

Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1" Tall - 100 Pack Weld Mount offers wire tie mounts, hose, and cable clamps, studs, standoffs, and floating nutplates. All of the fasteners are mounted with our unique non-sag acrylic adhesives which hold the parts in place on a vertical or overhead surface providing a permanent high strength bond.

2" Tall Stainless Stud w/3/8" x 16 Thread The HS200 stud is designed for heavy load applications such as mounting filters and panels. Thestud is inertial (friction) welded to a 2" base plate creating a very strong part. Manufactured of 304 stainless steel. Tensile strength is approximately 1,200 lbs. and shear strength is 1,500 lbs.

Stainless Steel Louvered Vent - Oval - 9-1/8" x 4-5/8"  Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.

Stainless Steel Cowl Vent with Base - 3" Hose  Cowl Vent with Base provides fresh air below decks by trapping air that comes across the top deck and forcing it into your boat's cabin or interior. Stamped 304 stainless steel construction with black plastic base. Designed for use with 3” ventilation hose. Installs with four #8 or #10 FH fasteners (not included).

16-14 Gauge - 3/8" Heat Shrink Ring Terminal - 25-Pack Wire Range:16-14 Screw Size:3/8" Quantity: 25 Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

12-10 Gauge - 3/8" Heat Shrink Ring Terminal - 25-Pack Gauge Size: 12-10 Screw Size: 3/8" Quantity: 25 Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

22-18 Gauge - 3/8" Heat Shrink Ring Terminal - 25-Pack Wire Range:22-18 Screw Size: 3/8" Quantity: 25 Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Stud 1.25" Base 1/4 x 20 Thread 0.75" Tall - 100 Pack Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.

Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75" Tall - 6-Pack Unlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff. This allows the standoff to be mounted from either side of the base. These parts are manufactured in 316 stainless steel making them suitable for deck applications. This standoff is inertial (friction) welded to the base yielding a very strong part. The bases are all 1.25" in diameter. Use for through deck mounting of hardware or anywhere you need a fixed female thread.

RAM Stainless Steel Double U-Bolt Base with 1.5" Ball for Rails from 1" to 1.25" in Diameter The RAM-235U consists of a stainless steel double u-bolt base connected to a 1.5" diameter ball. The double u-bolt base will accommodate rails from 1" to 1.25" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. This mount includes stainless steel u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt.

Stainless Steel Stud 1.25" Base 1/4 x 20 Threads 2.25" Tall - 10 Pieces The stainless steel stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs in shear. All studs have 1/4 x 20 threads. Use for hanging panels, through deck mounts and many other uses.

1.25" Tall Stainless Stud w/#8 x 32 Thread Our Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide range of wire clamps and other small components to composite surfaces. The base plate is 0.62" in diameter with a 1.25" tall stud. Tensile strength is 300 lbs. and shear strength is 375 lbs. Maximum torque load is 45 inch/lbs.